- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Universal remote codes for Prima TV are: 1019 0165 0116 0167 Just note these codes, and buy a universal remote control, which have these setup codes in its code list. If your TV asks for a five digit code, buy one RCA RCR 311STN model remote control. Five digit codes for this remote control, with Prima tV are: 10761, 10783, 10815, 10817
We'rehappy to help you with programming your DISH Network remote to your Prima TV.Start by pressing and holding the TV button located on the top of your remoteuntil all mode button back lights come on, and then release. Use the numberbuttons to enter the codes for your Prima TV; here are some of the codes wecurrently have for it: 674, 653, 673, 912, and 842. Press the pound (#) button.To check that the code works try several different functions on the remote tomake sure it will properly operate the TV. Remember that some codes may not becompatible with your TV. If this is the case, try the other codes listed foryour Prima TV until you find one that is compatible with it.
Ifnone of the above codes worked we recommend performing a power scan:
Power scan instructions:
Step 1: Press and hold the TV mode button until all mode button back lights illuminate,then release.
Step 2: Press and release the Power button.
Step 3: Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.
Step 4: Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.
After doing the power scan please remember to put the remote back into SATmode. We hope this helps and thank you for being a valued DISH Network customer!
Phillip Chang DISH Network Customer Service Representative
Hi my nameis Mike Houston of DISH Network. I see you are looking for the remote code toyour Prima TV, we do not have the three digit code at this time but we have away to program the remote to the TV through a Power Scan. I will send you thelink that will help with these steps, http://www.dishnetwork.com/SupportSection/power-scan-instructions.
Programming an Expressvu remote control can be frustrating. There are two basic ways of doing in it. The first one involves knowing both your TV brand name and also knowing the proper code to input in your remote. The second method is doing an automatic search. The following is a step by step procedure in how to program your dish network or Expressvu remote.
1)Make sure your TV and Satellite Receiver is ON. 2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top left hand side corner of the remote control. 3) Release that button, then press & release RED Button. You will notice TV button is stays on. If, it doesn't stay ON, you must repeat step 2 & 3. Otherwise, your batteries are low, you MUST change then. 4)Press and release the UP Arrow Key on the remote until TV turns off. Notice the UP arrow key button is the button below the volume keys (Stop button for VCR.) 5)Make sure you are aiming remote control to TV while pressing and releasing UP arrow key button. When you find the right code, the TV will turn OFF. 6) Immediately after, TV turns off, press # key.