Question about Casio Triple Sensor Pathfinder PRG60-1AV Wrist Watch

1 Answer

Analog hands not moving but digital part works fine.

I have a Benrus Advance. I replaced the batteries and the digital portion is working but the analog hands don't move.

Posted by on

  • Ben10point1 Mar 01, 2009

    I do have a PRG-60 and I have the same problem. After a battery change along with painting the hands with luminous paint the hands no longer move reliably. Sometimes they're fine, but sometimes they can lose an hour or more overnight if I'm not wearing it. It seems to be temperature dependent, and the colder it is the less likely the hands will move properly.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

A Benrus advance is not a Casio PRG-60T Tough Solar Protrek watch. You posted your query in the wrong place.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do I reuse 2 batteries for my Umbro chrono watch?


Normally the Umbro Chronograph watches having analog and digital clock works on single battery. When u put the battery inside ur digital is working fine but some times for analog hands do not move due to the loose button which is used to move the watch hands. So pull it out again and insert it agin gently till tick sound comes and u r good to go.

Let me know if ur watch is working successfully:)

Jan 27, 2017 | The Watches

1 Answer

On my casio edifice 4334 module and the digital works fine but the analog i can see the minutes handle trying to move but not succeeding , seems to me like it is stuck thanks in advance.


Check if the battery is still in good condition. If this doesn't solve the problem, swipe a magnet over the back of the watch in different directions until the minute hand moves. Take care not to scratch the watch with the magnet. It may be necessary to oscillate the magnet several times at the correct position and direction until the minute hand moves freely.

Sep 26, 2015 | Casio Watches

1 Answer

Analog on digital watch not working


when a watch has analog hands and has digital portion, 9 times out of 10 it will have 2 batteries inside. A lithium battery and a normal battery. It is possible one died before the other. Usually the lithium (digital portion) lasts longer. Have the battery changed.

Dec 06, 2013 | Watches

1 Answer

Wrangler Hero Watch analog hands dont work after battery replacement


Remove the PCB and replace the AG4 battery in the analog quartz movement. The stem can be removed by pressing the small lever through the hole visable after the CR2016 battery has been removed. I think it uses a Y121 movement.

Jan 31, 2013 | Watches

1 Answer

How to set the hands to match the correct digital display on my Casio wave ceptor 2734 wva-104h watch



Setting Digital Time
  1. The digital timepiece on a watch is set using the function buttons on the outer part of the watch face. To set the digital time, press and hold the upper left button until the seconds starts blinking. Press the lower right button to reset the seconds to "00."

    Push the lower left button to move to the Daylight Savings Time portion of the watch. Use the lower right button to toggle between "On" and "OFF."

    Press the lower left button twice. The hours unit will start blinking. To advance the hour, press the lower right button repeatedly until the correct hour is displayed. If you need to move the hours unit backwards, press the middle right button until the correct hour is displayed. When the hour is set, press the lower left button to switch to minutes, and use the same commands to change the minutes unit.

    After the time is set, press the upper left button to exit the digital time setting function.
  2. Setting Analog Time
  3. You may find after setting the digital timepiece that the analog display does not match. When this occurs, you need to set the analog time. To set the analog time, press the lower left button 6 times. Next, press and hold the upper left button until the digital time starts to blink. This indicates that you are in analog time setting mode.

    Analog time adjustment is completed using the lower right button. Every time you press the button, the analog time will advance 20 seconds. If you need to make a big change to the analog time, press and hold the lower right button to make the hands move faster. Once the analog time is set, press the upper left button to exit the analog time setting mode.

Aug 21, 2010 | Casio Watches

1 Answer

Will the analog (hands) stop working on a Wave Ceptor when the battery is low/dead? Digital feature still works fine....watch about 4 years old


Yes, definitely analogue part will stop, because it takes more power to move gears and hands. Replace battery and you'll be OK. Rate me, plz.

Mar 16, 2010 | Casio Wave Ceptor WV57HA-1AV Wrist Watch

1 Answer

Ul 1008 analog portion does not work


Are the hands moving but out of step with the digital display?

If so then try pressing the "mode" button to reach a mode that allows you to set the hands (on my Casio it is "HS"), I would expect something similar on yours.

You can then alter the hands by pressing one of the other buttons. I would expect one button to advance the hands and another to ****** them.

Happy experimenting!

Feb 22, 2010 | Kenneth Cole Watches

1 Answer

The digital portion of my watch is completely blank.. the analog works fine. Any idea what the problem is


You may have two batteries in your watch - one for analog and another for digital. Check that out and if this is the case - replace the battery for digital part. If there is only one battery - your watch's digital part has electronic failure and you will need professional watchmakers help to fix it.

Rate me, plz.

Jan 08, 2010 | Pulsar Watches

1 Answer

The hour & minute hands on my pulsar nx14-x001 do not move. the second hand quivers, but also does not move. the digital time and other functions are okay. HELP!


Without knowing the model of the watch i would say you need a new battery. It is typical for this style of watch to have two batteries or one lithium battery. In either case the analog movement will drain faster than the digital portion of the watch and will stop working first.

Sep 21, 2009 | Pulsar Watches

Not finding what you are looking for?
Casio Triple Sensor Pathfinder PRG60-1AV Wrist Watch Logo

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Jimmy Accardi

Level 2 Expert

98 Answers

k24674

Level 3 Expert

7993 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...