Question about Beyma WOOFER, 1400 WTS, 18" => Model 18LX60 Car Audio Amplifier

1 Answer

NO SOUND, NO POWER

I have a LEGACY MODEL LA690, a
LEGACY MODEL LA590 , a
VOLFENHAG MODEL ZX-8400 and a
CRUNCH MODEL CA 240. The VOLFENHAG AND BOTH LEGACY AMPS POWER UP BUT NO SOUND AND THE CRUNCH HAS NO POWER. IS THERE A WAY I CAN GET DIAGRAMS OR SCHEMATICS FOR THESE OR DO YOU HAVE ANY IDEAS? I DON'T WANT TO GIVE UP THESE AMPS, PLEASE HELP.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 48 Answers

Try different rca cables and also different speaker wiring to the amps and see what u get

Posted on Jun 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power to amp but no light happened when my battery went dead replaced


the power amp has a short in the unit and it drain everything out of the battery, that why the battery is dead. it is really possible that a capacitor is open or shorting out cause the unit to drain the battery.

Mar 26, 2014 | Volfenhag ZX-8400 Car Audio Amplifier

3 Answers

Amp turns on but no green light and no sound


As a pro i have ran into this problem many times,what happens with volfenhag amps the solders on the RCA inputs aren't very good,and what happens is that you get to much current going threw them and they over heat and lose contact,volfenhag will fix it,you have to pay for shipping to them,and include a 12 dollar money order.Volfenhag audio 1-323-588-8571.

Jun 03, 2010 | Volfenhag ZX-8400 Car Audio Amplifier

1 Answer

My amp has no sound It is hooked up right and has a green light but no sound?


Contact Eric @ Capital Audio & Electronics Repair 850-339-1130 we repair all brands & models

Mar 04, 2010 | Volfenhag ZX-8400 Car Audio Amplifier

1 Answer

Protection mode keeps coming on


That probably means that it's getting a surge of power. Do you have a fuse from your battery wire to your amp? Check also your ground wire. You may need to upgrade your ground wire.

Mar 03, 2010 | Volfenhag ZX-8400 Car Audio Amplifier

2 Answers

Legacy audio LA590 car audio amp protecet mode


Is that on all the time or are you saying the light is on? If that light is always on that just means it's protecting your amp. If it's off and not playing bass then your in trouble

Mar 01, 2010 | Legacy Audio American Legacy II LA590 Car...

1 Answer

Its smokin,can it be fixed 2000watt volfenhag


smoke usually means heavy damage to some component(s). you would need to open it up to see what has burnt and try to locate parts for it. if you can find what is wrong and the parts yes it can be fixed. generally very expensive to have someone else do it but if you are handy with a soldering iron it may be within your budget

Jan 11, 2010 | Volfenhag ZX-8400 Car Audio Amplifier

1 Answer

I have a volfenhag zx-8400 and it just geos into protection mode


The most likely problem would be a blown fuse. I would replace all of the fuses.

Oct 04, 2009 | Volfenhag ZX-8400 Car Audio Amplifier

1 Answer

I have a volfenhag zx-8400 amp. i dont have a manual. whats the proper way of conecting amp? its mounted on my speaker box, which is ported, 12' volfenhag 2500 watts. on the side of amp it had voltage...


The voltage prolly says like 100Mv-2v, it doesn't really matter, just know that that the lower you turn it the harder it bangs. The X-over depends on where your box is tuned, crank the knob down too about 40htz and you'll prolly be good, just don't turn it lower than your box's tuned frequency. And your rca's go to line input. And there shouldn't be a problem with mounting your amp vertically, you prolly just had a bad connection. Hope this helps if you have more questions please ask...

Sep 21, 2009 | Volfenhag ZX-8400 Car Audio Amplifier

1 Answer

Need help please...


If you unplugged the fuses, the amp won't come on at all. I'd say its a blown transistor, you can test this by opening up the amp and using a multimeter to check resistance on the transistors.

Aug 03, 2009 | Volfenhag ZX-8400 Car Audio Amplifier

Not finding what you are looking for?
Car Amplifiers Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Beyma Car Amplifiers Experts

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Beyma Car Amplifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...