Question about RCA Flat Panel Televisions

1 Answer

Cannot Remove Stand From TV

I just bought an RCA Model is at this link http://tv.rca.com/en-us/modeldetail.html?MN=L22HD32D

I can't for the life of me figure out how to remove the stand so that I can mount it on my wall...I have it all ready to go...just stuck on this darn issue. Any help would be GREATLY appreciated :)

Thank you,
Teresa

Posted by on

  • mkmadsen Jun 20, 2008

    Thank you! I found that after the screws were as far out as I could get them I had to use my fingernail to grab them so they'd come out..I then lifted "up" on the TV - while holding the stand with my elbows *picture this* LOL the stand seperated smoothly.



    Again, many thinks for the help! :)

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 260 Answers

There should be two screws on the back of the television toward the bottom. If you remove those you should be able to slide out the stand for wall mounting. But please be careful. If you damage the television attempting this then you can lose your warranty. The manufacturer recommends professional installation only for mounting your television to the wall. Good luck. :)

Posted on Jun 20, 2008

  • Ken Jones
    Ken Jones Jun 20, 2008

    You are very welcome. Thank you for using our service. Please tell others about us and remember us when you have future problems.

    Thanks, :)

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can I get a owners manual for a RCA 24 inch flat screen TV with a DVD player


What is the model number? I found the manual for the LED24G45RQD on the product page: http://tv.rca.com/product/manualdown.asp?modelnum=LED24G45RQD . Just make sure you are on the Manual Downloads tab. The direct link to this manual is http://download.oncorpus.com/LED24G45RQD_UM.pdf . Some other manuals may be available from http://rca4tv.com/support/downloads.asp .

There is also the LED24B45RQD. The product page is http://tv.rca.com/product/features.asp?modelnum=LED24B45RQD . The direct link to the manual is http://download.oncorpus.com/UM%20LED24B45RQD.pdf . I also found the manual for the LED24C45RQD on http://tv.rca.com/product/manualdown.asp?modelnum=LED24C45RQD . Two manuals are available depending on the year that the TV was manufactured. Older RCA TVs were manufactured by other companies. If these links don't help, please add a comment with the model number of your TV. I may be able to find the manual elsewhere.

I hope this helps.

Cindy Wells

Aug 12, 2015 | RCA Flat Panel Televisions

1 Answer

How can I get a RCA L26WD12 manual?


Are you needing a owner's manual as stated or a troubleshooting manual? A troubleshooting manual can be found here: http://www.manualslib.com/manual/138985/Rca-L26wd12.html

An owner's manual can be found here: http://www.umlib.com/brand/RCA/category/TV/model/L26WD12 or here: http://www.retrevo.com/support/RCA-L26WD12-TVs-manual/id/404ag703/t/2/

You can find module replacements here: http://www.shopjimmy.com/rca/l26wd12/

Sep 06, 2014 | Flat Panel Televisions

1 Answer

WHERE IS THE ON/OFF SWITCH ON MY 22" RCA TV/DVD LED22845SRQD


Most of the RCA sets will have ON / OFF switch located at the side of the TV. If you can't locate it there, check the underneath of the front panel. anyway, if the set has switched OFF using the remote control, for the last time, you should have its remote control to switch it back ON, even if the main power switch is ON.
http://electronicshelponline.blogspot.com/

Jul 23, 2014 | RCA L22HD32D 22 in. LCD HDTV/DVD Combo

2 Answers

Rca l40fhd1yx9 tv stand


If the set is equipped for a stand Google the model number with the word base or stand and see what you find.

You can also contact Thompson (RCA/GE) to see if available.

Mar 12, 2012 | RCA L40FHD41 40. in HDTV

1 Answer

I can get the audio output to work for the cable television, but it can't get any sound to work (even from the television) while I have the rca output plugged in. What do I do?


Please clarify about the RCA jacks, you are taking the audio line out from the back of the TV RCA (Red (right), White (left)) to feed the external amplifiers and you are not getting any sound outputs through these two RCA jacks? but you can hear the sound OK from the TV speakers.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
TV model number?

Jan 17, 2011 | Dynex 32 in. LCD Flat-Panel HDTV

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a RCA Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...