Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

1 Answer

I have a Cruzer Micro USB 2.0 Flash Drive. I know how to plug it in but that's all. I want to transfere my e mail addresses.

Posted by on

  • Kim Parker
    Kim Parker May 11, 2010

    What e-mail software are you using?

    Microsoft Outlook stores your addresses in a file called Outlook.pst.

    The file should be hidden. You can find it (assuming you are using Outlook or Outlook Express) as follows:

    - right click on "Outlook Today" in left hand "folder list" (may not be showing).

    - left click on "Properties for..." (last item in the list)

    - click on the "Advanced" button.

    The file path (also has the file name) will be shown. For example...mine is "C:\Documents and Settings\Owner.Kims-CX26\Local Settings\Application Data\Microsoft\Outlook\outlook.pst"

    Yours will probably be the same except that instead of "Kims-CX26" it will be whatever you named your computer on the network.

    You can do a search for "outlook.pst" but you must tell the search to "look in hidden files".

    Once you have found it then you can move this file (drop and drag) it to the Flash Drive icon on your desktop.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 101 Answers

You do onthing boss first put all the email address in note pad then this note pad is copy to pen drive its better rathe than this you want addres book in pendrive its can posibal but when you wnat next time to see the address its problmatic

Posted on Jul 23, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I transfer photo picture from usb to my computer?

1.Plug in your USB
2.The first time the device is connected to the computer the PC will load up the drivers. Be patient.
The PC will recognize your USB SanDisk Cruzer Flash drive.
4.Click on My Computer/Computer icon on your desktop(or start - computer) and after that click on your flash drive icon.
5.There you can see all files on your flash drive and right click on your chosen picture and copy.
6.Right click (example desktop) and paste.

Good luck. I hope this will help you

Aug 01, 2011 | SanDisk Cruzer Micro 8GB USB 2.0 Flash...

1 Answer

How do you get this thing to work. We have Windows Vista and want to save our pictures but we have never use one and we are stuck. We put the device in j drive and thats all we got. Help

1.plug your SanDisk Cruzer on your pC.
2. wait for the installation to finish(installation usually starts by itself )
3.go to my computer and try to find your device
4. if you found the device you can know start transferring your pictures,,

Jun 18, 2011 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

1 Answer

I am a student in school, and I am not to computer savvy on Flash drive.. It did not come with any instructions on how to use it. It is a Cruzer USB 2.0 Flash Drive (4GB) Can you help me with step-by-step...

  • Boot up your computer and find an open USB port. These are small, rectangular ports typically on the sides or backs of laptop computers, or on the fronts or backs of desktop towers.

  • Plug your flash drive into the USB port. The drive will slide in only if it is turned in the right direction, so if you have trouble inserting it, turn it over.

  • Make sure your computer sees the flash drive. It should launch a menu, letting you know that it has found a new storage device. You can choose an option from the menu or close the menu if you don't need to immediately access the flash drive.

  • Install the flash drive's driver if your computer doesn't recognize the flash drive. The flash drive's packaging should include the manufacturer's website address. Open your Internet browser, go to that address, and download the flash drive's driver from the site. Install the driver on your computer. After that, your computer should be able to recognize your drive.

  • Jan 04, 2011 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

    2 Answers

    What do micro cruzer sandiscs do

    your micro cruzer sandisk can perform lots of function .
    You can copy your data,songs, video files on your flash drive to use it any time any where .You can do this by just following the simple steps :
    1. Plug the USB flash drive to a USB port.
    2. A USB flash drive icon will appear on the desktop

    3. Double-click on your Cruzer USB flash drive.
    4. Select the files or folders you want to copy to the USB drive by clicking on them.

    5. Drag and drop the selected files or folders to the USB flash drive icon.
    Note : Do not immediately remove your drive from the USB port,right click on drive icon in notification area then click on safely remove the drive ,then remove your drive from your computer.
    2: You can take backup of your computer on your flash drive
    3.You can also boot from your drive if *********** board support boot from from your flash drive.

    May 18, 2010 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

    1 Answer

    Sandisk Cruzer Micro 2GB Usb Flash Drive. Windows was unable to complete format!

    Try this:

    STEP 1 - Optimize the flash drive for performance
    1. Plug in the device to the PC.
    2. Double-click My Computer.
    3. Right-click on the flash drive, then select Properties.
    4. Click the Hardware tab.
    5. Select the SanDisk Cruzer USB Device disk drive, then click Properties.
    6. Click the Policies tab.
    7. Select Optimize for performance, then click OK.

    STEP 2 - Format the flash drive
    1. Double-click My Computer.
    2. Right-click on the flash drive, then select Format.
    3. In the File system list, click NTFS.
    4. Click Start.
    5. Click OK to start formatting.

    Jan 13, 2010 | SanDisk Cruzer Micro 2GB USB 2.0 Flash...

    1 Answer


    This is a plug and play device so you just need to insert it into any spare USB port and your system will then see the device as a logical drive and will allocate a letter to it so you can transfer files to it. Cruzer’s have a self loading app which will give you some other options and a manual. Just use it like you would any hard drive. Also you will need to use the Cruzer’s own Eject Tab when you want to remove it from your PC / Laptop.

    Sep 25, 2009 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

    3 Answers

    How do i transfer files to a SanDisk Cruzer flash drive

    It is simple. You insert it into a usb 2.0 port on your computer. Windows will recognize it and it will show in the My computer window. You click on the icon for the drive and you can explore what is in it.
    If you have files (documents, pictures, etc.) you select them, right click mouse button to copy them ( CTRL C) then you open the Cruzer and you right click inside the drive window ( CTRL V) and click Paste.
    .2. You can open 2 windows side by side, one for the folder that contains the file to be transferred, the other for the Cruzer. You will have to reduce the sizes of the windows. Then You click on the file to be transferred and maintain the click. After that you drag the mouse cursor and drop it in the Cruzer window. (That is called Drag and Drop)

    Hope it helps.

    Aug 30, 2009 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

    3 Answers

    How to use flash drive

    Cruzer Micro is an USB external memory where you can store files.
    It is automatically detected and installed on all Windows OS from Windows 2000 onward, same on Mac OS and recent Linux versions.
    All you have to do is plugging the device into USB.
    After the flash drive had been automatically installed , it will be displayed under Computer as an external disk.
    You can copy and transfer files using Cut, Copy and Paste functions, or Send to function in windows, or the file manager, depending on the OS used.
    In Windows, before unplugging the memory from USB , it is better to turn off the computer or use the 'safely remove USB' function located near to the clock, on the lower right hand corner.

    Read also the documents below:

    Introducing the Cruzer Micro

    Find Answers || BeCompliant Corporation

    How to Use Sandisk Cruzer Flash Drive

    May 15, 2009 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

    1 Answer

    How to install Sandisk Cruzer Micro USB 2.0 flash drive

    Plug in the Cruzer, then go to My Computer and open the window for the Cruzer. Then drag and drop the files to it.

    Oct 28, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

    Not finding what you are looking for?
    SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

    Related Topics:

    26 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top SanDisk Computers & Internet Experts

    Arora Singh
    Arora Singh

    Level 2 Expert

    180 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Sandy Moore
    Sandy Moore

    Level 2 Expert

    111 Answers

    Are you a SanDisk Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides