Question about Philips 30PW633R 32" TV
Under the flap on the remote control, there are two buttons with a line and two arrows drawn between them, press both of these buttons together and the instalation menu will appear, choose automatic installation and in about 5 minutes the TV will set istelf up.
Posted on Jan 03, 2009
I have since found the solution. I purchased a remote control for this tv. It is not the original but it is programmed as the original. Anyway, I still couldn't tune the tv in with this remote until I contacted Philips and they gave me the information on which combination of buttons to use on the original remote control in order to get the install menu up on the screen. And I used this combination of buttons on my programmed remote control and it worked :)
So for HaydenJones who has the original remote, here is the solution;
You need to hold the button with the picture of the clock and the botton with the question mark in together and that will bring up the install menu. As far as I remember these buttons are in the hidden compartment on the original remote control. On my remote control it was neccesary for me to also hold in the F (function) button in order it to work.
I hope this has been helpful.
Posted on Jan 04, 2009
Solution No 1 works!!!!!!!! Excellent! Thank you
Posted on Apr 04, 2009
This doesn't seem to work since the digital switchover as on my Maatchline TV it has to be in analog mode in order to access the inastallation menu. I have now lost my Freeview channels following the switchover and don't know how to get them back.
Posted on Jan 07, 2010
Hi dear,i have philips television match III line 29".when i enter in install option through menu then access code appears but i dont know that code plz tell me about that code.
Posted on Apr 08, 2010
SOURCE: Tuning a Channel
To Tune in Philips Machline TVs
Without using remote. Open panel on front of tv
1-- Press the menu key. --screen will now display 5 menu options--
2--press the down arrow key untill Install is highlighted
3--press the vol + key -- now install options appear (language--autotune---mantune--channel no--store)
4--press the down key to select the function required (Autotune is best) Manual is ok if the tv station's freq are known and they can be then given a ch no
5--press the + key to start the function selected ---tv will auto tune in tv stations when completed
6--press down arrow and highlite store then press ok
7--Press menu to clear menu off screen
Posted on Oct 29, 2008
Tips for a great answer:
Jan 13, 2013 | Standard (CRT) Televisions
Jan 08, 2013 | Standard (CRT) Televisions
May 09, 2010 | Philips Magnavox MT1905B 19" TV
Jun 01, 2009 | Standard (CRT) Televisions
May 14, 2009 | Sharp Standard (CRT) Televisions
Mar 04, 2008 | Konka K1938U 19" TV
3,696 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: