Question about Projection Televisions

3 Answers

I have a Protron 32" LCD and I do not have any power to the TV. The power supply box looks dead with no light. My manual says DC adaptor, but on the power box says AC Adaptor. Please let me know what power supply box I need to power up my TV. Thanks.

Posted by on

  • heartbun519 Jun 20, 2008

    I need to know who supply this AC/DC Adaptor and where can I go to purchase it. Thanks.

  • heartbun519 Jun 21, 2008

    Somewhat helpful and thanks for the info.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI,

www.lcdpayless.com is the only website from where you can get the power adapter.

Please don't forget to rate or accept the solution.

Posted on Jun 20, 2008

  • Priya darshan Jun 21, 2008

    You have rated the wrong solution please don't forget to rate my solution as fixya.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 848 Answers

For tv purpose we need only AC better you consult near by dealer to check it because if you give wrong supply the tv set will get damaged

Posted on Jun 20, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 197 Answers

Well..it's an AC/DC adaptor, so you are fine. Most likely it's done for the day, and will need to be replaced

Posted on Jun 20, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a WD 62525 tv that will not turn on, completly dead no lights or sound. replaced the main fuse on power supply board what else could it be?


you might need to have voltage checking at this time. if their is a dc output voltages at the power supply board.if none the main board will not turn on.then probably their is bad component at the power supply board.

Nov 18, 2012 | Mitsubishi WD-62525 62" Rear Projection...

3 Answers

I have had a Hitachi 42" Plasma screen TV for almost 3 years and recently it has had problems. When you turn it on, the TV only stays on for about 10 minutes, and then the screen goes black with the...


The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Jul 14, 2008 | Projection Televisions

1 Answer

Monitor lcd 32 toshiba 32cv510u Yellow blinks three times, y no enciende, please helpme.


Hello,

Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Hoping that this will help to solve the problem, and do take care in handling the television because it contain high voltages...

Aug 07, 2011 | Toshiba 65HM167 65" Projection Television

2 Answers

Logik 32'' lcd tv dead


hello check the glass fuse inside the tv it will be in the power supply


regards
shaun

Mar 11, 2010 | Projection Televisions

1 Answer

My W3201C 32" LCD TV made a loud popping noise when I turned it off. Now it will not turn on. No power. No LED light.


That would be your transformer popping and dieing. Usually the popping is followed by a burning smell which is a good indicator that the part is unrecoverable. The cost of the part is variable based on the make and model TV and is usually not too labor intensive to replace. If not under warranty, let the repair gut know that you know what the problem is. Then, ask them to quote the cost of the replacement part and part number. Then ask them to quote you their hourly rate and get a time estimate. Then, google the part number and see if the cost is reasonable.

May 02, 2009 | Projection Televisions

2 Answers

Daytek DT3220 power button flashes green 4 (5) times, no picture


The power supply voltages might look good on an oscilliscope or using a DC meter, but that doesn't really tell you if the supply is good.

Your TV has an unusual symptom, however 99% of the problems on these TVs are caused by the power supply. I have had 3220s that won't power on, the remote or controls on the TV won't work, or the unit blanks out and all sorts of other odd problems. The power supply can test fine, but if you substitute it the TV will work fine.
Sorry to say you're up a creek. The good news is that just about any 5,12,24V power supply for a 32:" TV will work if you are comfortable rewiring the connectors. I have done this a few times and rescued the TVs from an early grave (I'm actually just about to start on another one now). The pinout is written on the board, and make sure the power supply you want to use also has the pinouts marked on the board.

Nov 22, 2008 | Projection Televisions

1 Answer

LCD tv power light doesnot come on.


These off brand almost always have power supply issues that have to be troublshot. $150 at a local tv repair.

Nov 18, 2008 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

Protron PLTV37C 37-inch LCD TV Yellow light indicator on; no picture or sound. Is it repairable? I was told the company went out of business and no parts are available.


There is a history with the power supplies failing on these TVs if it fails to power up, nut it could also have a back light inverter board defective.
The LCD still repairable if you find a good TV technician that knows how to fix electronics devices to the component level.
Let me know if you need further assistance.

Nov 14, 2008 | Projection Televisions

1 Answer

How much to replace a power supply?


Check prices a PTS Corp online and look on ebay too.

Mar 27, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...