Question about Philips Televison & Video

3 Answers

Own a Philips 14PV415/07 TV/Video unit (well 2 actually) both have the same fault, as soon as you switch the unit on, it comes up with EJECT T in the left hand corner, then switches off within 20secs tops. Neither unit has a tape jammed in the machine. Any pointers please

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Actually this type of unit requires "intilization signal" of tape mechanism to remain power on. When ever it has problem in mechanism, it shuts down as safty precaution. Please check its loading, eject mechanism might be dirty or need little lubricant for smooth running. Kindly replace loading belts if found crackes on it.

Posted on Aug 06, 2008

  • 1 more comment 
  • Shahid Electronics
    Shahid Electronics Aug 06, 2008

    Schematic Manual can also be provided if you need it.

  • Shahid Electronics
    Shahid Electronics Aug 07, 2008

    Please check my solution, any help you need?

  • Shahid Electronics
    Shahid Electronics Aug 14, 2008

    Hello, hows your Philips TV / Video now? Do you need more help? Pls let me know.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

HI,

Please do a hard reset buy unpluging all the cords of the unit for 30min and then plug it back in.

Posted on Jun 20, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Did u try a hard reset or not?

if u dont know how to do it means
please reply back

Posted on Jun 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my screen red when it should be black?


Search Results

    Philips Magnavox 8p6031c Crt Lens Fluid Repair Questions ...

    www.fixya.com/...philips_magnavox_8p6031c_crt_lens_fluid/page-11
    Recent Philips Magnavox 8p6031c Crt Lens Fluid Kit Dull Video Fix questions, problems & answers. Free expert ... Philips flat screen tv, Red flashing light. Light.

    Popular Philips Magnavox 8p6031c Crt Lens Fluid Repair ...

    www.fixya.com/...philips_magnavox_8p6031c_crt_lens_fluid/popular
    Popular Philips Magnavox 8p6031c Crt Lens Fluid Kit Dull Video Fix questions, problems & fixes. ... My son accidentally spilled water on our Philips tv and when i turned it on ... I need a screen replacement of philips tv 60" ... Why the tv come on but a min after the red blinking come on an it turn off by it self what the problem?

    Magnavox Projection TV problem... ' Techlore

    www.techlore.com/forum/thread/.../magnavox-projection-tv-problem

Jan 13, 2016 | Philips Magnavox 8p6031c Crt Lens Fluid...

1 Answer

Very odd problem


It is a fault with the control board or with panel.

Aug 24, 2008 | Philips 43P8341 43" Rear Projection...

1 Answer

Why the tv come on but a min after the red blinking come on an it turn off by it self what the problem?


tv had found a fault to troubleshoot use model number and search for the fault code on manual.some indicator may blink several times to release the symptom.

Dec 21, 2014 | Philips Televison & Video

1 Answer

Philips HD tv has no picture


common fault this , normally the fuse has failed on y-main board due to shorted thick film unit

unfortunately its not a cheep repair job.

Aug 18, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

I have a philips 60 inch tv with on picture and sound


There are two common problems with Projection TV sets. Problem #1) Convergence Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pngSOLUTION http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jun 28, 2009 | Philips 60P8342 60" Rear Projection...

2 Answers

Continued from no picture no sound just clicking


The TV is on protect mode. The clicking sound is the protection switch that keep turning the TV off to prevent further damage, this happens when a fault had been detected.

Try first leaving the TV power cord unplugged for some times, let say one hour or so.

Also ensure that the fault is not coming from a faulty receiver box sending bad signal, check if you get same problem with no receiver box or dvd connected.

If that does not work, and you keep having a flashing led on front of the TV, and tv turning off by itself after a while, that indicates a fault condition.

The flashing light indicates a diagnostic state called protection.
When the TV goes on protection there are only two possible reasons.

1The internal circuits are jammed because of electrostatic charges accumulating on capacitors, or because of a wrong voltage read by the main chip on your monitor controller board. this started the protection circuit.

2 The protection circuit detected a wrong voltage or abroken contact, identified an internal fault and kicked in , startingthe flashing light.


If you are in situation one, then theTV will reset just unplugging power cord for one or two hours,sometimes even minutes.

If you are in situation 2 , then there is an internal fault.

Common faults that can occur are a blown capacitor on power board, a convergence IC has blown, or a fault on Digital board.

Check also the video cable or any external connection cable, if the cable is shorting, or the connector is bad, you can get same flashing state because of the video cable.


If under warranty contact the manufacturer ringing the number on the user manual

If you want to repair at your own expenses, just locate any good qualified repairer.

If you want to DIY you find parts here,

Appliance parts, electronics parts & more from PartStore.com

Encompass Parts Distribution

Electronic Replacement Parts: Plasma & LCD TVs, Appliances |

May 15, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

No sound from a Philips model 60P8341...


Hello Jarvis1,

This is an indication that the actual sound output is working, but the amplifiers to the speakers are not. How you could take care of this is to check in there are any loose connections to the speakers. Then check if you have sound coming from the leads of the output stereo amplifier (You will need the schematic and an audio tracer/tracker to find this location and test for sound). I would venture that there would be no sound from the amplifier. If not you will have to replace the amplifier chip. I would suggest getting a qualified TV technician to perform this task. If you do have sound at the output of the strereo amplifier chip, then it might be a case of the earphone jack switch being broken, let me explain when you plug in your earphone the speakers are disconnected by a switch in the earphone jack if this switch is broken it could disable the speakers and produce these results. There is also the possibility that you have the speaks disabled from the menu of your TV (check this too, actually check this first).

I hope this helps,

Thank you,

Shuttle83

Jul 03, 2008 | Philips 60P8341 60" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69718 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...