Question about Fisher and Paykel Dryers

1 Answer

Need heating element for dyer Mod.# DEGX1. Where can i find this part in Orlando fl.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 525 Answers

I attempted to locate an answer to resolve the issue for you, but you have not provided me with enough information to access my service database. Please observe the TIP below, and post me back and I will be happy to assist you further. Should you require more extensive consultation to help resolve your complaint(s), you may contact me through our premium chat service.

Tip: Always provide the complete information provided on the manufacturers product information data tag, located on the unit, and not in the user’s manual. This will help you acquire a more accurate and expeditious response to your complaint.

Below is a link that will help you with parts and diagnostic procedures that are specifically tuned to your manufacturers data plate information.
http://www.repairclinic.com/SmartSearch/SmartSearch.aspx
If my assistance helped resolve this issue, please show your appreciation by rating how effective my advice was in resolving this issue.
Thank you,
Dave E. (Illeagle)

"Your satisfaction is my personal reward"

Posted on Jun 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DOESN'T HEAT


Could be bad heat element. Lift top of dyer, or look from back side with access panel removed, or look thru door if glass door while dryer is running on a heat cycle. You should be able to see red glow of heat element coming on. If not then you will need to open up dyer and remove drum. Inspect heat element for break in coil or coils touching each other or metal frame of dryer. You can also use an ohm meter and read the restence of the coil ...should be just a couple of ohms.
If it is a bad coil you should be able to replace fairly easy. If it is not coil than you will need to check themistor or cycle control switch. Hope this helps.

Nov 10, 2012 | General Electric DHDSR46EGWW Dryer

1 Answer

Fisher Paykel DEGX1 no heat, therm tripping - used multimeter


Go to http://fisherpaykelparts.net/techhelp/fisher-paykel-top-load-dryers-us-models/ This forum will work you through your problem

May 31, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Heats when unit is not on


Same thing just happened to my DEGX1. I took it apart and one of the heating elements had broken and fell to the bottom of the metal case. I think it was creating a short to ground and making it heat. I removed the broken element wires and attached them back best I could and did a test run with no problems. It is not heating when off now either. searspartsdirect.com had the elements for $67 so I ordered a set and will replace both of them (part #395583). My dryer is only 4 years old and 3 weeks ago the driver belt broke. Irritating they can't make them last any longer these days.

Jan 22, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Run no heat


Common faults -
1 The heating elements can fail (meaning open circuit)
2 There are cut-outs (T.O.C's) that might need resetting
3 The thermostats (stats) can trip out or burn out (meaning opencircuit)
4 Moderntumble dryers also have sensors and pcb's (Printed circuitboards) thesehave programs that can fail and circuitry although most should produce an errorcode showing you were the fault is.
5 Faultyconnections and burned wires may also be the fault.

Free tumble dryer repair videos


We have a Free full video library on appliance repair video’s

Jan 13, 2010 | Whirlpool Dryers

1 Answer

Heatin element broken on my fisher & paykel dryer model # DEGX1


Try doing a Google search on the internet...put in your model number and make...look for parts

Sep 23, 2009 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

WHERE TO BY DUAL HEATING ELEMENT FOR DEGX1?


try sears .com..use parts link type in model #

Sep 07, 2008 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Fisher and Paykel DEGX1 Electric Dryer Stays Warm


Yes, get a new element. The reason it's on all the time is because the element coils have broken and one of the coils is touching the canister that encloses it. This creates a direct short to ground. By the way, the element has 120 volts to it all the time. It will only HEAT when 240 is applied through the centrifugal switch of the motor. Your 120 volts is shorting to ground... not enough amps to trip the circuit breaker, but enough to glow the element.

Aug 23, 2007 | Fisher and Paykel DEGX1 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Fisher and Paykel Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...