Question about Siemens Cell Phones

1 Answer

I have a siemens MT50,When I use the phone book to select and ring a number there is no problem. If I choose to ring the same number by dialling it on the keypad it fails, with the message No Connection. Can you help please? Regards H.Hagan.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 79 Answers

Is the number a LandLine? If so, try dialling the area code aswell.
If it's a mobile, you may have to change the 0 of 07xx... to +44.
You may be able to do this by holding the 0 key to get a +.
Check you've exactly the right number.
Failing this, you may wish to see if there are any firmware upgrades. Check the web.

Posted on Jun 20, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Nokia C6-01 How do I delete single dialled or received calls from the Log? I can delete from the dialled screen but the call remains in the Log.

Hello Sinyoro,

In the Call Log eg. Dialed Numbers, highlight the number/contact you want to delete, press "Option" and then select "Delete", this will delete only the selected entry. Make sure you don't press the "Delete All".
Hope this helps.

Jan 01, 2018 | Cell Phones

1 Answer

Phone was played with by child, now red light shows and no dial tone

Your phone ahs been locked by mistake. When telephone is locked, except for a saved emergency number, no numbers can be dialled; incoming call can be answered.
To unlock it, Lift Handset, select function. (1) Lock. (0) Unlock. Press SET key and replace handset. OK.

Aug 30, 2011 | Siemens Euroset 5010 Corded Phone

1 Answer

I want to set speed dialing but do not have the operator book

Go to contacts or phonebook.
There find the options option and Select speed dialling.
Assign contacts to the respective speed dialling number....

Jun 15, 2010 | Lands Phones

1 Answer

How can I unlock my siemens MT50 phone

Siemens MT50 is requesting for NCK code

May 10, 2010 | Lands Phones

2 Answers

CECT KA08 Caller ID/Msg ID

Hello, I had the same problem, but i figured out how to get the callers id/information. On the main page select Call Center>>Call History>> SIM1(or whichever you are using)>> and select either the Missed/Dialed/Received calls. Lets choose Dialed Calls for now. Select a phone number that you recognize>>select OK>>Options>>Save to Phonebook. In here you will create a new contact. Make sure you delete this old contact information from your phone book. (so you don't have doubles if already saved to your contact list). Now you can go to your main menu again and select the phone book option. Select the contact you have created and add a photo and ring tone you like. Now when you get a call you get their photo and rign tone. For sms you get only their name, but thats good enough for me.

Jun 24, 2009 | Dual Electronics CECT P168 Cellular Phone

1 Answer

Nokia 1100 Speed dialling

Press Menu, select Contacts and Speed dials. Select the key you want,
( to ) and press Assign. Select whether you want to assign to call or to
SMS. Select the name you want and press Select.
After the phone number has been assigned to a number key, you can speed dial
the number in the following ways:
• Press the corresponding number key and then press Call, or
• If Speed dialling is set to "on", press and hold the corresponding number key
until the call is started

Nov 30, 2008 | Nokia 1100

1 Answer

Set number of rings before answer machine pick up

From the main menu select the Voice Mail option in Voice mail select Ring Delay in Ring Delay you can choose the delay time before Answering Machine pick up the phone from 0 to 30 secend.Reza from Iran

Oct 01, 2008 | Siemens Gigaset S455 Cordless Phone

2 Answers

Number of rings

press *94, then press the number of rings you want 1-9. The tone will change and thats it.

Nov 29, 2007 | Siemens Gigaset S455 Cordless Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

michael galang

Level 2 Expert

138 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Siemens Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides