- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi, you can solve this problem in a simple method- press the power button of the bluetooth device continuously for 2 or3 s check the light of blutooth device is turned on then go to bluetooth device option on your mobile phone and select add more device the time pair the device by using this code 0000 was this helpful to you
First you have to enable the Bluetooth headset to scanning mode, To do this, press and hold the power button continously for 10 seconds, you may have a stable LED, this shows that its in discoverable mode, Now perform scanning and you may get your device and you can pair and make it work
Just hold down the green dial button on the speaker open the speaker slide to power on the unit hold the green phone button down for two to three seconds the light will flash from blue/red continuosly and then pair it from your phones bluetooth menu.
The 6300 is def compatable with the visor lite 1.60 My firmware on the phone is 7.21.
If this solution doesn't work hold down both the volume up and down buttons on the head set for about 5 seconds whilst searching for a new paired device with your phone then when asked enter the code 0000 and connect