- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Open cpu cabinet. Refix RAM memory. Clean dust from all parts. Reattch ATX power connector from smps to motherbord. Pull cmos cell from motherbord for 10 minutes so all settings are defaults. REmove pci cards from pci slot of motherbord then check. Open processor fan and processor then refix both. Make sure motherbord not ground with cabinet cover. Then check if still problems then change ram .check RAM and motherbord separately .
First open cpu cabinet. Then Refix your RAM memory . Reattach ATX power connector from SMPS to motherbord. Remove pci cards from PCI slot. Pull cmos cell from motherbord for 10 minutes so all motherbord settings are defaults. Reattach both connection to harddisk. Make sure your harddisk is detected in bios. When you power up the computer press F1 or F2 or "del" key to enter in bios. Then check harddisk is detected. Let me know if you need more assistance. Thanks.
open cpu cabinet
Refix RAM memory then check.
Pull cmos cell for 10 minutes frommotherbord so all settings defaults.
Also clean dust from all circuit.
Reconnect ATX connector from smps supply to motherbord.
Refix processor fan and processor.
First open cpu cabinet and pull cmos cell for 10 minutes from motherbord then all settings are defaults.
Then check .
If still face same problem then you have to change your SMPS it is square box on back top side of cpu .