I have just bought a fuji z35 camera and when I switched it on for the first time it has come on in chinese, and I can't understand the menus to change it back to english please help

Sorry can't speak chinese

Like most point&shoot cameras the Z35 doesn't give you much direct control over "minor" things like aperture and shutter speed. It's designed for you to simply point and shoot.

You have some control however, by selecting a scene mode. Portrait mode, for example, will attempt to open up the aperture to minimize depth of field, which tends to result in a faster shutter speed. Landscape mode, on the other hand, will attempt to close down the aperture to maximize depth of field, resulting in a slower shutter speed.

I just could suggest check your Z100 FD USER MANUAL and try intuitively following the steps indicated by the manual in the section "language".

Hope this helps.

Hi,

You can download and print the complete manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

Check battery

Your previous camera wasn't another Z35, was it? Most cameras will not display pictures that were taken with another camera. The old pictures are most likely still on the card. You can plug the card into a card reader and transfer them to a computer.

Follow this link to download the manual.

http://www.fujifilmusa.com/support/ServiceSupportProduct.do?prodcat=781371

What you need is to have a copy of the user guide. Here's a link:
http://www.butkus.org/chinon/fujica/fujica_stx-2/fujica_stx-2.htm

i have the same - no solution i'm afraid as this is a problem with the memory on the camera, rather than something which can be set in the service mode

My mode awitch detached.
A fuji fix cists $130.
Where can I get help with assembly?

Alan