Question about Harley Davidson Harley-Davidson Motorcycle Desktop Telephone

1 Answer

Changed handle bars but now I have no turn signals, horn or brake lights

I have a 2002 Harley 883 that i changed the stock bars to drag bars but now i dont have any turn signals, horn or tail lights from either the hand or foot brake. What could it be? I thought that i may have pinched a wire but i have went back and checked it twice and it's good. Could i have blown a fuse or circut braker and if so where would they be located? Which one would it be?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

Fuse their under the seat and their marked good luck

Posted on Jan 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

95 road king brake light does not work taillight works changed


I take it it does not work foot or hand control. look for your brake light switch right side of frame rail usually a goldish color or silver color. it has two plug in connectors. Unplug and put a test light to them. apply either brake. If the light comes on then you have a bad brake switch. replace it. if you have foot brake and no hand brake light then it would most likely be the brake nipple in the hand switch. but you did not say so I assume no brakes foot or hand.

Jun 09, 2009 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Harley davidson how to change tenttionners


Is your bike STOCK?? Have the Cams been changed? Do you have Stock Cam CHAINS & TENSIONERS, or is it updated to GEAR DRIVEN Cams? Either way, you have a Cam and or Lifter Problem, and if you are not a Harley Mechanic with access to Shop type tools and Equipment, then I suggest you take you Harley to a reputable repair shop for diagnosis and repair. DO NOT CONTINUE TO RIDE WITH THIS PROBLEM, IT WILL NOT FIX ITSELF and will only cause you MORE EXPENSIVE DAMAGE. Good Luck! -Dr.Mark

Sep 28, 2008 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Turn signal probs


This is going to be one of three things, and you should check them in this order, 1- you have a loose connection, bad/broken ground wire, or an exposed/bare wire on, around, or in line with the rear signal that is staying on. It's common for the wiring insulation to rub through and short at the bend where the signal wires go through the signal mount and run down the rear fender strut. 2- the switch on the bars is sticking or malfunctioning, however, this is less likely because it usually causes both signals to remain on. and 3- the flasher relay has malfunctioned and needs replaced. I'll bet that this is a bare wire, so start by tracing the signal wires for the right side. If you don't find a bad wire, then replace the relay. Let me know what you found out.

Sep 01, 2008 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Brake lights stay on 07 hd fxdb


Have you changed your bars? Check the micro switch behind the brake lever in the housing. Might have moved a bit.
Check that both filaments of the brake light are good and one is not broken.
While you have the brake light cover off check the connectors into the main body of the light. On my Bob (same year) They all plug into there and can be unplugged easily and re-inserted. One might have not been put in all the way home on assembly.
Hope it helps.

Jun 27, 2008 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Wiring


i would check the obvious fuses and such. however, if your bike has the self reset circuit breakers, you might have one to go bad. they work on the bi-metal principle where current flows through a calibrated piece of spring steel and when it heats up, it deforms and opens a set of contacts and when it cools off it returns to shape and closes the contacts. these are available at auto parts stores at a faction of the cost from hd.

Jun 21, 2008 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

2005 883 Harley Codes


check out the codes here
http://www.harleyhog.co.uk/0405troublecodes.htm

Jun 09, 2008 | Harley Davidson Harley-Davidson Motorcycle...

5 Answers

Harley Davidson 883 2004


I have a 1980's somthing 883 with a fucked up hand built wiring harness and for some strange reason when I hit the starter it just clicks. So I moved the relays and got shocked. Whats my problem???

May 25, 2008 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
Lands Phones Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Lands Phones Experts

kakima

Level 3 Expert

98796 Answers

Brian Mathews

Level 1 Expert

20 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Harley Davidson Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...