Question about Numark TTX1 Turntable

1 Answer

Power source My table won't turn on... I've check the cable and it works. Is there anything else I can do?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Sounds like your power transformer went out, or you blew the fuse - located on the rear of the turntable, next to the power supply and RCA connectors - not all TTX's have this fuse.

If it's the transformer, is not an easy fix, and requires professional help.

Good luck.

- OPTiC.
Digital Analog Therapy
www.djprolab.com

Posted on Nov 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my crosley turntable not turn when I put the needle down on the record


If you manually put the needle on the record, you still have to push the power on button. If you are using the auto on and the turn table isn't turning, either the band from motor to turn table broke (or came off) or the motor for turn table stopped working. All this is as long as there is power to the unit.

May 15, 2014 | Crosley Turntables

1 Answer

My Crosley CR49-TA won't revolve. It turns on, and


Most turntables are belt driven. Suggest you take a look inside but remember to unplug the deck first. Usually it's a simple case of slipping the belt back on.

Apr 26, 2013 | Turntables

2 Answers

Trying to find a way to get the turntable of a Zenith Allegro Console to work. We have turned to whole unit on and off. AM and FM radio plays. Turntable doesn't turn. At the bottom right of the turn...


Lift the turn table off the case and check the belt if it has one or the idler wheel that mechanically turns the table. Also check the motor to see that it rotates when you simulate a record play moving the needle carrier towards the center, The power must be on to test it. Becareful not to touch the 115 VAC line.

Oct 29, 2010 | Turntables

1 Answer

The turntable just won,t rotate. and i cannot work out to dismantle the turn table casing.


Hi. no need to dismantle. Remove the platter an check belt. May need replacing. styluscity@gmail.com

Aug 28, 2010 | Sony Turntables

2 Answers

One of my DJ turntables = only left side stereo sound


need to narrow it down, using 1 turn table ONLY with the mixer on channel 1 (the chanel that is working) to test reciever is working properly and sound working on both side of the speakers, this eliminate the first turn table. Next, disconnect the working turn table (1) and connect your second turn table to the same chanel and see if you getting the sound coming chanel 1 just as your first turn table did. If you getting sound coming out from turn table on ch1 than is not the turn table issue. It will be you mixer having problems. You cant solve the problems having everything connected. Testing one turn table at a time using working chanel on the mixer to see if both turn table working properly. If you use the same chanel testing both turn table and the second one does not work than it will be one of your turn table is faulty. Note: if you find and test both of your turn table is working properly than it will be your mixer. good luck and hope that help..

Aug 06, 2009 | Technics SL-1200MK2 Turntable

1 Answer

No power in either turntable


maybe the power source that goes into the deck itself has dissconected, but it is strange that niether would work...so im guessing the decks are fine...it might be your extension cable...or u have had a power surge, if that has happened...then you need to seek profesinal help...and unfortunally, your decks may have died. But check your plugs/extension cables...etc....it should be a basic problem, and easily fixable

Aug 03, 2009 | Technics SL-1210 Turntable

1 Answer

Looking for replacement stylus RS-10 for Akai turn table AP-M10


go to this site?

http://www.needledoctor.com/Online-Store/Turntable

they may have it in stock or a suitable replacement? good luck

Jul 11, 2009 | Turntables

1 Answer

Computer not playing my technics table


More than likely the RCA cables need to be replaced. Torque, Serato, and all digital dj programs require a clear signal path coming from the source (turntable, cdj, etc). If it does not have a clear signal, or 1 side is louder than the other, it will not work.

You have to remember, these are analog turntables connecting to a digital system. The signal quality is different, and your RCA cables have to be prestine.

The following cables work very well for this type of configuration:

MOGAMI RCA CABLES

- OPTiC
The ORIGINAL 1200 TECHNICIAN.

Technics DJ Repair Videos
Technics DJ Repair
Technics DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Feb 18, 2009 | Technics SL-1200MK5 Turntable

1 Answer

Turntable power seems to be lightly surging


Sounds like a voltage regulator on the mothboard is going out. Avoid going in there, you really could fry yourself poking around in there. Check out these guys. They're top notch

http://www.repairnyc.com/

And Technics authorized.

Jan 12, 2008 | Technics SL-1210 Turntable

2 Answers

Suitcase Turntable stopped turning


Check the drive band- it may have come off the pulley. But if it is a new purchase then perhaps it should go back to the vendor

Jul 07, 2007 | Crosley 0187SST Turntable

Not finding what you are looking for?
Numark TTX1 Turntable Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Numark Turntables Experts

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Numark Turntable Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...