Question about Tomtom GO 910

1 Answer

Cannot pair TomTom GO 910 with Scala Rider Q2 - even though TomTom sees the device in the Bluetooth search. Hi there hodgep. I can relate to your problem, but not help unfortunately. I have tried to pair these two and have the exact same problem. I found out how to delete all bluetooth pairings from the Q2 on another forum but this didn't help. I even deleted my mobile phone from the TomTom 910 (didn't use the handsfree feature that much anyway) thinking this might cause some kind of a conflict, but it hasn't helped. The cynical side of me reckons that TomTom won't allow anything but the "Rider" versions to pair with a scala headset, but I'm hoping I'm wrong. Would love to hear if you find a solution.

Posted by on

  • paulbrown Feb 03, 2009

    I have a similar problem. I emailed Tomtom.com stating that I do a lot of wildlife photography and use the Tomtom GO 910 to return to previous sightings. Often I leave the car and walk down named dirt roads using the voice instructions. It's normal for me to walk 5-10 kilometres. I asked them if they could recommend ANY bluetooth headset ( using their promoted Bluetooth capability ) that I could use so that I can keep noise to a minimum. So far absolute silence has been their helpful response. I have had no problems with the 910 but BIG problems trying to get help or advice with my request. I will post anything I find that is useful but I'm not holding my breath.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 51 Answers

Their is no solution....The scala headset is only going to pair with the tomtom rider.....that is how TomTom designed it

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cardo q2 pairing


hard rest. remove battery and clear any settings from the mobile phone. is discovery ON?

Mar 12, 2014 | Cardo Scala Rider Q2 Pro

1 Answer

Not pairing with other devices


Have you turned blue tooth settings on your phone? Also you can pair your phone if the Bluetooth is working. Otherwuse you may be out of range. If that does not work have someone else try the bluetooth to eliminate the problem is with your phone.

Nov 15, 2013 | Cardo Scala Rider Teamset Pro

1 Answer

Headsets won`t pair.


I am having the same problem. Did you ever find the solution?

Jun 02, 2010 | Rider Cardo Scala Q2 Multiset Headset...

1 Answer

What is the passcode for the Scala LX700 bluetooth?


Four zeros is the PIN you want to use for pairing
  • 0000
That's also the default code for a majority of bluetooth headsets.

Here is the entire pairing process broken down:

1. Turn on your phone and make sure that its Bluetooth function is activated.
2. While the Headset is turned off, press the Wheel inwards for at least
8 seconds. The Status Light will begin rapidly alternating red and blue,
indicating that the Headset is in Pairing mode.
3. Using your phone, search for Bluetooth devices by following the
phone’s instructions.
4. After a few seconds the phone will list the scala-700LX as a “discovered
device”. Select it and follow your phone’s instructions to accept the pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that Pairing was successful and the Headset’s
Status Light will begin flashing slowly in blue.

Apr 22, 2010 | Cardo scala 700LX Bluetooth Headset

1 Answer

My tom tom rider cnt find my cardo scala headset even tho it is on, can you solve, thanx


i have the tom tom rider 2 its a great bit of kit but i disconnected the scala cardo headset for helmets so that i cold try a different bluetooth headset for use in a car and it didnt work i then tryed to recconect it to my tom tom and it cant find it when searching for it what do i do ? what have i done?

Aug 06, 2009 | Tomtom RIDER GPS Devices

1 Answer

Tom Tom Unable to find my phone


Most Motorola mobile phones can only remain discoverable by other Bluetooth devices for a period of 60 seconds. Occasionally this period is too short to complete the pairing process with a TomTom device.
Go to:
http://www.tomtom.com/support/index.php?Language=1&query=motorola&FID=3702

Apr 10, 2008 | Tomtom GO 910 GPS Receiver

2 Answers

Garmin zumo 550 bluetooth pairnig problem


Have you connected the device to the computer and run webupdater? Mine showed up with a bluetooth firmware upgrade. Bluetooth works fine, however, lost the functionality of the phonebook after the update. Sometimes you win sometimes you loose

Mar 28, 2008 | Garmin zumo 550 GPS Receiver

Not finding what you are looking for?
Tomtom GO 910 Logo

Related Topics:

362 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Tomtom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...