I purchaased a HPphotosmartC4280 All-in one 3 hrs. ago. When I try to install it, the screen says it does not support this device When I call i-866-922-5052, I constantly get a busy signal. Do they have one operator there? Please help. I have an iMac. I hate to return. It says it's compatable with a iMac.

Reset the lamp hours as follows.
Press the Exit button on the projector for 3 seconds to display the total used lamp time. Press the MENU button on the projector during the lamp hour message. An adjustment message will appear. Press left or right arrow to reset lamp hours or press EXIT to leave.

sonsunny

Hi,
The BlackBerry has the feature on auto-start. When you insert the Battery, the device will automatically boot-up. It'll be showing an hour glass while loading the settings. But if it is longing for more than 10 minutes, there might be some error in the OS. It's better to contact a near-by authorised Service Center.

Regards
Vineeth K.

Got the same problem - changed battry in the RS200 twice, dead after about a week. Bought a "quality" battery, lastet fro 3 weeks, dead again.. :-(
This 4. time, after replacing battery again, I did try to Master Reset the RS200 (see www.polar.fi under support in forums) link: http://forum.polar.fi/showthread.php?t=14065 - but also TAKE CARE to reset to factory default!! You will loose all stored data!!
I am now only waiting (and running) to see how long the battery will last this time...
This might be the problem... give it a try?

i am sorry i dont know too much how to solve this but ill give it a go , when this happens and ur installing a code and ur like **** why is this happened DO NOT TURN IT OFF or u will get the white screen of death just wait it out, or just try taking the AR out than turn on than reinsert n try again, i broke my AR doing this sadly acouple hrs ago..

This may be a battery power monitor issue. Try disabling the "Mircosoft ACPI- Compliant Control Method Battery" device. This is located in Control Panel-->System-->Hardware Tab-->Device Manager-->Batteries. Had similar problem with 2 Acer Aspire series laptops (diff models). 2 and 3 year old. Original batteries (both still hold charges for 1.5 hrs of normal usage). Running WinXP, one with SP2 and other had SP3. Both came in the last month with slow jerky TPAD function and nearly non responsive keyboard access. Checked the usual; virus, spyware, hijacking, driver conflict etc. Cloned drive and factory installed..still same problem with kb & mouse. However an external USB keyboard and mouse functioned normally (no lag). Noticed with Battery removed kb & mouse was normal. Finally found disabling ACPI control battery device resolved this issue while allowing laptop to run on either battery or AC.

Had same problem. It's a software download problem that can't be solved online. Tech support said they would immediately send me a new unit with software preloaded. When it arrives (talked with them just 24 hrs ago) I am to call them back so the account can be transferred to new unit. I then send the old one back to them. Hope it works out OK.

i think ur phone ic is alright but the connection between the screen and circiuit bord are not working.
i would suggest u to got a expert repairer
rather than trying repairng urself with unlettered hands.

jus use a hair dryer for a FEW min ONLY...prob solved

Re JVC AV28CT1EKS reverting to standby, Try changing C521. pt number QFZ0200-302 Good luck! Nick

Hi,

Download the user manual from here:
http://www.retrevo.com/s/RCA-RCR311B-Universal-Remotes-review-manual/id/402ci569/t/1-2/

Click on the PDF download in the product summary.

Cheers