Question about Pioneer XM2go Inno Satellite Radio Receiver

2 Answers

PIONEER INNO 6 months after getting my PIoneer Inno, my remote quit working. My thought was dead battery. I replaced the battery and it is still not working and I can't find anything in the manual to help

Posted by on

  • 1 more comment 
  • Anonymous Oct 29, 2008

    my remote is not working, I bought a second one and is not working ither.

  • Anonymous Nov 21, 2008

    I have the same problem with both remotes. Started from day one right out of the box.

  • Anonymous Dec 31, 2008

    new out of the box....DUD!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

I've had my Inno for a couple of years, and haven't had any problems with the remote, until now.
However, since I have two other new 'in the wrapper' remotes, I pulled one of them out, and still can't get a response with my radio.
So, I'm thinking it is a problem with the radio itself.

Posted on Jun 11, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine didn't work out of the box either -- but i discovered if i warmed the remote up ---it works fine. I put it in front of a heater vent till it gets warm then it works great --- as long as it doesn't cool off.

Posted on Jan 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Pioneer Inno wont stay powered up.


Your battery could be at end of life depending on how long you have had it. I know pioneer are pretty good with warranties so if you have had it for 12 months or less contact pioneer and ask them if its viable for a warranty replacement. Or even take it back to the place you bought it from. You may be able to take it to an electronics store to test your battery charge capacity as well.

Jun 10, 2008 | Audio Players & Recorders

1 Answer

Pioneer Inno - Powers on, great signal - but audio or pad data!


I'm assuming the power button it not in 'hold' position, and you have the volume turned up, and/or on the correct frequency with the adjoining radio?

May 27, 2010 | Pioneer XM2go Inno Satellite Radio...

1 Answer

Pioneer inno will not recive xm singal


Are you still having this problem? Sounds like you just aren't getting a good signal. Antenna is not properly mounted, not getting good singal.
Or, the antenna and/or cable is damaged.

Apr 02, 2009 | Pioneer XM2go Inno Satellite Radio...

1 Answer

Pioneer inno radio-doesn't work in car


When its in the car dock, the Inno sends an FM signal to the car radio. It does not receive a signal from the car radio. You must have the external antenna correctly installed outside the vehicle for the Inno to work. The built in antenna is disabled when the device is placed in the car dock. Make sure to test it outside, since garages or car ports will block the signal.

Dec 03, 2008 | Pioneer XM2go Inno Satellite Radio...

1 Answer

Pioneer Inno shows loading


Not any more help here than with Pioneer. Not sure satellite radio is the way to go if you have to replace the radio very couple of years!

Sep 02, 2008 | Pioneer XM2go Inno Satellite Radio...

1 Answer

Pioneer inno


The problem is caused by a glitch in the firmware that came on your Inno. It can be easily fixed by downloading a free firmware update at http://fwupdt.xmradio.com.

Aug 29, 2008 | Pioneer XM2go Inno Satellite Radio...

1 Answer

Pioneer inno stopped working


the exact same thing even to the battery happened to me did u get it fixed if so how

Jul 29, 2008 | Pioneer XM2go Inno Satellite Radio...

2 Answers

Inno is frozen


remove battery and then reinstall and power up

Mar 18, 2008 | Pioneer XM2go Inno Satellite Radio...

4 Answers

Pioneer inno


I have the same issue. I was told a firmware upgrade will fix this issue

Nov 05, 2006 | Pioneer XM2go Inno Satellite Radio...

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4990 Answers

John
John

Level 2 Expert

509 Answers

T-Comtech Repairs
T-Comtech Repairs

Level 2 Expert

417 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...