Question about Projection Televisions

1 Answer

Blinking green reset light

No picture or sound still, reset button will not reset the tv Tv when turned on shuts off after several seconds. no picture with sound, then the green light blinks when you push the reset button. After the blinking lights, we push the power button and sometimes the picture and sound appears and stay on as long as you want, but sometimes it takes several push of the reset button and repeating the same procedure before we get the picture and sound. We bought and installed a new lamp, and returned it for doing the same thing. We installed the old lamp and it's much better than the new one.

Posted by on

  • fs1104 Jun 19, 2008

    It's a Mitsubishi Projection TV model WD62530, HDTV, and the blinking light after pushing the reset button is every second interval and will shut off after about 30 seconds.

  • bubbdogg90 Aug 13, 2008

    i have a rca 52" projection tv and when i plug it into the wall the power button blinks in intervals of 5 then stops the continues to do the same thing over and over

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Can you please supply us with the make and model as well as the blink count of the green light. That count should be indicating the problem circuit. Once that info is posted, we should be able to give you more details and possible solutions.
Dan

Posted on Jun 19, 2008

  • ABRsvcs Jun 19, 2008

    You have the famous blinking green light problem. There are 5 bad surface mounted capacitors on the "d" board that need to be replaced. I'll look up your specific model and give you more details tomorrow.



    Dan

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


the circut that detects the bulb has been also failing in these sets
and the conversion chip that controls the picture , and the transformers are not putting out the full power they are supposed to.
this set will need to be tested to determine the exact cause or causes

Oct 18, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

I have a Mitsubishi WD-62525 HDTV that suddenly wont turn on. Just has a green blinking light when you hit the power button. Any ideas?


I found this on another website, most likely it is your power supply capacitors.
  1. Press the "reset" button and hold for 10 seconds .... Does TV turn on and blinking green light turn to solid green.

  2. Unplug the TV from it's power source for various times, ranging between 5 minutes and 24 hours..... Does blinking green light continue upon plugging in the TV.

  3. Disconnect ALL devices from the TV; DVD, Tuner, Cable Box, unplug the TV for various duration times .... Does blinking green light continues upon plugging in the TV.

  4. Press Power and Menu buttons simultaneously and hold depressed for 20 seconds .... Does blinking green light continue to flash.

  5. Press Power and Display buttons simultaneously and hold depressed for 20 seconds .... Does blinking green light continue to flash.

  6. Insure that no front panel buttons are inadvertently stuck in an "engaged" position.

Diagnosis: If none of the above test resolve the issue, then the failure lies in one of the following:

  1. DM Module Capacitors have FAILED.
  2. DM Module is defective.
  3. EEPROM Board failure
  4. Power Supply failure.

Feb 28, 2011 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

I have a HDTV 1080 and the power to our neighborhood went out over the night and now the green light on the TV just blinks. I can't get the TV to turn on. I have reset the system reset button on the from...


try this ... if there is a reset button on your 'front' control panel..maybe 2 - 3 positions to the left of your blinking timer light..
try inserting the tip of a mechanical pencil or tip of a straighten paperclip into the 'tiny hole' of th ereset button ...hold pressure on that button until yout blinking light starts blinking RAPIDLY .. this
rapid blinking should continue for several seconds or a minute.
then it should stop .. may even go off ... now ..hopefully.. you will be able to turn your set on

Aug 20, 2010 | Mitsubishi Projection Televisions

4 Answers

PT-52LCX65 Lamp Meter


Hello.. meseta809


first off all it's not necessary to have the TV on to reset it. the problem is the dmd need to send the info that you have a working lamp.

try this to see if it work's

Panasonic TY-LA1000 TV Lamp Reset Procedure/instructions:
Ok, so apparently there are a couple of different ways forum members have found out how to reset their Panasonic Lamp timer (this should apply to all of them, not just the TY-LA1000 specific lamp)

“Hold the VOL down button on the TV and the SPLIT button on the REMOTE for five seconds”

Again, you will need to press the Volume button on the TV while pressing hte SPLIT button on the Remote Control for five seconds, it will NOT work if you try to do it both from your remote!


Jan 15, 2010 | Panasonic PT-52LCX65 44" HDTV

1 Answer

The picture will go black and the sound will go out. At the same time, the green power inicator will flash. Then the picture and sound will come back on for several seconds and then it will go out again....


My TV had the same problem. I called Sony yesterday and they told me to reset the TV. I did so yesterday, and it seemed to work. Here is the transcript with instructions:
Please turn ON the TV. While holding down the RESET button on the Remote control, press the POWER button on the TV. The TV will turn itself OFF, then back ON again. Release the RESET button.The TV will go thru the initial setup, and should work normal.

Aug 02, 2009 | Sony Grand WEGA KDF-60XS955 60" Rear...

2 Answers

Mitsubishi WS-55909 dm board repair


I have the same TV and the error light code on my set is 22

May 31, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Blinking green light under 'Timer' flashes there is no picture


If you have a green blinking LED that runs continuosly, its the widespread problem of failures of capacitors on several circuit boards in the TV. Currently Mits is having authorized service centers remove the chassis and send it them for rebuilding. Its an expensive and time consuming repair.

Feb 17, 2009 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Continuosly blinking green light and tv won't turn on.


Either bad capacitors -vented - on power supply board or bad E2P eprom board on DM board.Probably the capacitors-4-1000Ufd and 2-3300ufd.You should get expert help from reputable tv shop.Not really do it yourself fix either way.

Dec 15, 2008 | Sony KDS-60A2000 60" HDTV

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...