Question about Kenmore Refrigerators

I'm looking at the same model...these measurments taken by the sales person at Sears:

32 5/8" W

69 7/8" H

33" D

Posted on Jul 20, 2008

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

thats 6 meters square need another factor[HEIGHT ] for cube 12x .5x ?=CUBIC

Jul 17, 2016 | Garden

If you measure the height, width and depth you can calculate the volume. You multiple the height by depth by width. Make sure you use the same units for each measurement. For example if you want the volume in cubic feet, make sure all measurements are in feet. If the height is 5 feet 8 inches, you need to convert this to feet, which would be 5.67 feet, likewise for the other two measurements. It wont be exact because there will be bits sticking out but will be near enough. Make sure you also calculate the volume of the door space as that is included in the volume.

May 21, 2016 | Refrigerators

1
Open the refrigerator door. Measure the depth of the refrigerator

from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

2 Measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

3 Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

4 Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Things You Will Need

from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

2 Measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

3 Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

4 Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Things You Will Need

- Tape measure
- Note paper

May 19, 2016 | Kenmore Refrigerators

Width is measured across the front or back horizontally. Depth is the measurement taken from front to back, not the height which would be a vertical measurement.

May 05, 2016 | Refrigerators

best bet is to take a tape measure and measure the width , the height and the depth, write down those measurements then go to an appliance shop and measure all those on display

Dec 09, 2015 | Kenmore Microwave Ovens

No idea, but you can figure it out yourself. Measure the inside height, depth and width of the fridge with the doors open to the nearest inch. Then multiply the H x W x D and divide the total by 1728. That will give you the cubic feet. Not exactly, but close enough.

Mar 18, 2015 | Refrigerators

You can do an exact power measurement by putting exactly

500 ml of water in a glass (Pyrex) or plastic measuring cup in the microwave. Measure the beginning temperature and record it, preferably with a digital thermometer. Run the unit on high for exactly 18 seconds. Use a digital watch or a stop watch, not the timer on the unit. Remove the measuring cup and stir the water to make sure that all the water is a uniform temperature. Record the temperature rise. Say the temp rise is 20 degrees Fahrenheit Multiply that figure by 38.75, this would indicate that the power delivered into the cavity is 775 watts. This is the old standard of measuring the power. The new standard called the IEC 705 would add 10% to that for a total of 852.5 watts. This matters more than the rating of the unit because if the power output is more than 15% below the units rated power, the magnetron is probably getting weak and needs to be replaced. Probably not worth the cost to repair. The voltage at the wall could also cause a low power output output. 'Google' the model # to see if you can find any info on this model #......

500 ml of water in a glass (Pyrex) or plastic measuring cup in the microwave. Measure the beginning temperature and record it, preferably with a digital thermometer. Run the unit on high for exactly 18 seconds. Use a digital watch or a stop watch, not the timer on the unit. Remove the measuring cup and stir the water to make sure that all the water is a uniform temperature. Record the temperature rise. Say the temp rise is 20 degrees Fahrenheit Multiply that figure by 38.75, this would indicate that the power delivered into the cavity is 775 watts. This is the old standard of measuring the power. The new standard called the IEC 705 would add 10% to that for a total of 852.5 watts. This matters more than the rating of the unit because if the power output is more than 15% below the units rated power, the magnetron is probably getting weak and needs to be replaced. Probably not worth the cost to repair. The voltage at the wall could also cause a low power output output. 'Google' the model # to see if you can find any info on this model #......

Nov 04, 2013 | Microwave Ovens

I chatted with someone at Sears. They told me it is approx. 22 cu ft.

Alternatively, you could measure.

The first step is to open the refrigerator door. Measure the depth of the refrigerator from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

Then, measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Alternatively, you could measure.

The first step is to open the refrigerator door. Measure the depth of the refrigerator from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

Then, measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Apr 10, 2013 | Refrigerators

you can find out by measuring the depth of the tub in inches. Measure the diameter of the tub at the opening where you put the clothes in. Multiply those 2 numbers. Then divide the figure by 144 which is a cubic foot in inches. That will Give you the cubic feet.

Example Depth of 23 inches and diameter of 21 inches. 23X21= 483/144 = 3.35 cu. ft.

Example Depth of 23 inches and diameter of 21 inches. 23X21= 483/144 = 3.35 cu. ft.

Jan 16, 2011 | Kenmore 24032\24036 Top Load Washer

The movement for this watch is obsolete so I cannot find a spec sheet for it. From memory I think it is a 371 (SR920). If you can give me the exact measurements of the area the battery slots into (DEPTH and DIAMETER) (in milimeters) then I can tell you exactly which battery.

Sep 22, 2010 | Pulsar Watches

38 people viewed this question

Usually answered in minutes!

×