Question about Projection Televisions

Open Question

I have the rca 401A2 and lost the codes to program the tv and stereo

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REMOTE PROGRAM CODE FOR RCA D52W20


When I got Direct TV my TV would not program with the remote so I had to use separate remotes. That is what the Direct TV rep told me and now I have Time Warner and still have the same problem with one of the TV's. Hope this helps

Mar 24, 2013 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

SHould AN RCA RCU400E. RCA RCU404N UNiveRsal Remote AuTomatically WorK. On an RCA P56950 model TV without the codes?


No,only the original tv remote that design for that tv model will work only for that tv without a universal codes.All universal remotes have to have a codes enter to program it to make work for the tv dose not mater same model or simular.All the rest same model of tv or simulair tvs the original remote only 50/50 should work,some fuctions just not there or just don't have it.

Aug 14, 2011 | RCA P56950 56" Rear Projection Television

1 Answer

Hi I pressed the wrong button turning the TV on, now I have no sound and can't get it back. please help.


Hi,

SAP (Second Audio Program) may be turned on. This used to be a widespread RCA problem maybe caused by incorrect conversion of analog signals for viewing as phony HD images. Costly class action lawsuits addressed the problem in USA. Most of the specific equipment causing the problem used by broadcast/production/satellite industries was either adjusted correctly or replaced. If the problem re-occurs, it may caused by specific TV channels or programs that you watch. Codes inserted in the signal are incorrect and confusing the RCA TV Guide and audio processing circuits. The error causes SAP to be incorrectly selected as default for all channels.

Remedies:

Change audio settings in customer adjust menu to Stereo from SAP. Sometimes the On screen TV Guide set-up must be cleared of location, etc., and set-up again.

Sometimes it is difficult to set correctly. Unplug TV for 12-24 hours and TV may reset to default stereo setting instead of SAP.

This was an active Class Action legal issue 10-15 years ago in the USA.

easyab

Feb 23, 2011 | RCA Projection Televisions

1 Answer

I can get a picture , but no sound on the TV . What am I doing wrong?


Many RCA TV sound problems are caused by SAP function being activated by TV station equipment that converts Analog TV signals to HD signals. Accidental pressing of the wrong buttons on your remote can also cause this problem.

The incorrect conversions causes the Audio settings to be changed from Stereo to SAP by the received signal.

Solution is to go to Audio set-up in customer menu and change settings from SAP to Stereo. If you find that settings are wrong, change them to "Stereo". Do channel scan if you are using the TV tuner/remote to select channels. Turn off the TV and unplug for 60 seconds. Check the settings again and reset if required.

This problem may re-occur when you select the VHF channel, satellite channel or cable box channel that is causing the problem. It is not a TV fault that can be repaired. The problem is caused by the incorrect incoming signal.

SAP is Second Audio Program, used for second language transmissions.

Second cause may be that the speakers have been turned off in the audio set-up menu.

easyab

Apr 22, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

Locked t.v. (sva c86b model) cant open without remote is lost


You did not remark which make and model TV you are referring to, but most universal remotes can control most multiple devices: TV, VCR, DVD, Stereo, Satellite Box, etc. I would suggest getting one of these as buying an original remote would most likely be a lot more expensive. These remotes include instructions and program codes to enter for programming all your devices.

Hope this helps!

Dec 07, 2009 | Projection Televisions

1 Answer

Need programming methods and codes for sony tv


Have a look around in this site; http://remotes.com/store/codes_original.html let me know if it helps

May 11, 2009 | Projection Televisions

1 Answer

We lost the codes for our Universal Remote Control. The battery compartment has the letters/numbers: RCR450C 3701P


What kind of remote is it? if it is rca you can push the device your going to program it to such as the tv then hold the power button until it stays lit oh, by the way the tv should be on while you do this,now that the power button is lit keep pushing it until the tv turns off as soon as it turns off you push the stop button on the remote like you were going to stop a dvd.Now press power again and your tv should turn on,repeat these steps for all your other devices and your done with no codes,hope you have an rca remote and if you dont maybe they have this no code feature in other brands,good luck

Sep 24, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...