Question about Epson Stylus Photo R300 InkJet Printer
This is normally a error for the waste ink pads in the back of the printer epson seem to have a random number then flashes the error up there is a program around to cure this error
download from there but use at your own risk
Posted on Jun 24, 2008
SOURCE: Epson r300 printer
step2............press+hold stop,ink,power buttons untill printer switches self of
step3............switch back on and problems should have gone
Posted on Jan 13, 2008
You actually need to change the ink absorber.
Heres a video on how its done on the R800.
Please refer to your manual for proper localization of the ink absorber.
Doing this will get you to move on
Posted on Jun 20, 2009
This is a common prob of all epson printer. If you use more than 230GSM thickness paper with the printer and use 80 gsm paper next, it wont pick up. This is due to the spring in the back side of the paper picker unit elangated to more thickness and fail to function fully. you can remove the paper pickup unit and change the spring if you have the service manual.
Posted on Aug 11, 2009
Turn off the printer, hold down these buttons for 5-10 seconds (Power, Maintenance, and Stop). The printer should cycle itself back on and go through the reset process.
Posted on Jan 18, 2010
Tips for a great answer:
Nov 11, 2015 | Epson Stylus Photo R300 InkJet Printer
Nov 11, 2010 | Epson Stylus Photo R300 InkJet Printer
Jun 21, 2010 | Epson Stylus Photo R300 InkJet Printer
Dec 01, 2009 | Epson Stylus Photo R300 InkJet Printer
Jul 06, 2009 | Epson Stylus Photo R300 InkJet Printer
May 26, 2008 | Epson Stylus Photo R300 InkJet Printer
109 people viewed this question
Usually answered in minutes!