Question about Whirlpool Washing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
HI, You should remove it. Here is how
UNPLUG the dryer! Remove the two screws under the lint screen and pop the top up by inserting a flat blade screw driver in the gap between the front panel and the top. Remove the rear panel of the dryer and
locate the four 5/16" screws that hold the lint screen housing to the bulk head. Pull the lint screen housing away from the bulkhead and reach in to remove the item that fell.
Please let me know if this help or if I can assist you further.
Posted on May 28, 2009
SOURCE: how to connect a dryer in 240 v?
I have to say if you don't understand 120v and 240v it might be best to let someone more knowledgable help in person.
120v is 1 leg
240v is produced from 2 legs opposite phase.
do you have "A" and "B" phase and if so do you know how to tell?
Do you have electric heat with breakers?
If so i'll try to talk you through it
Posted on Mar 11, 2010
Sounds to me like either the seals on the front and back of the drum are worn or the glides for the drum are worn and is causing the clothes to get caught between the drum and the usually the
front edge of the dryer. The worn glides will cause the gap that you mention.
Posted on Feb 11, 2011
Tips for a great answer:
Mar 28, 2015 | Whirlpool Washing Machines
Jan 31, 2014 | Whirlpool Washing Machines
Jun 26, 2011 | Whirlpool Cabrio 7.0 Cu. Ft. Super...
Apr 30, 2011 | Whirlpool Washer Motor Coupling 285753A
May 03, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...
Mar 02, 2010 | Dryers
Oct 26, 2009 | Whirlpool Washing Machines
Apr 07, 2009 | Whirlpool Dryers
Aug 19, 2007 | Whirlpool AWG329 Front Load Washer/Dryer
200 people viewed this question
Usually answered in minutes!