Question about Motorola 2.4GHz Wireless G 802.11g/b (wpci810g)

2 Answers

Windows XP HOME NETWORKING ISSUES

I have been troubleshooting a pc with xp home installed. No matter what I try I cannot connect to the internet via my wireless router. I have the current xp updates, and I have searched MS's website for help for two weeks and tried all the recommendations that they said...still not connected. I have uninstalled the Motorola card and I have two wireless usb adapters and I can put the usb adapters into a pc next to this xp home one and they work fine. But the second I put it into the xp home machine it tries to load the drivers and says "driver has a problem, windows cannot install the hardware for this device." I tried intalling a 10/100 land card and it wouldn't connect to the internet that way either.... AN OPERATING SYSTEM PROBLEM OR EITHER A MOBO ?? I tried what MS said about this error and it still doesnt work. I have decided that I must have some kind of corruption in the hash or registry that is causing this mess. I am two seconds away from reformating the HDD and installing XP PRO OR VISTA and TAKING A HAMMER TO this ****. I have XP Pro at work and never have any troubles...I also was told that xp home automatically used WEP so I configured my router for WEP and put in the wep into all my pc's on my network so the network name and the wep are all the same...I also configured my router to the MAC ADDRESSES OF EACH PC IN MY NETWORK and STILL CANNOT GET ONLINE ON THIS COMPUTER!!! I do not have the software that came with this pc, as it was a gift and I cannot reinstall the xp home as I dont have the disk...ANY IDEAS BEFORE I GET OUT THE HAMMER WOULD BE APPRECIATED VERY MUCH....

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

One suggestion is to connect first, then implement the security. That way you are not troubleshooting WEP configurations when you haven't even connected yet.

Posted on Jan 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

If don't have the windows instalation disk then don't use windows use Puppy linux free live cd
--
with this os you can network, go on the internet an alot more
--

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Acquiring network address xp


You must have at least the date right and the time otherwise you get this response. Set the time and date on your computer to solve this issue. Let me know if this works.

Dec 05, 2013 | Belkin (F5D7000) 802.11g/b Wireless...

1 Answer

Internet connection not working on wireless


Your problem is listed under the wrong product category, just thought I'd mention that. Are you trying to troubleshoot the N600 Wireless Dual Band USB Adapter (WNDA3100)? I can not identify your hardware by the number 600n. Feel free to respond so I can further assist you in finding the drivers you need to get that XP up and running again.

Dec 17, 2012 | Linksys Wireless N300 USB Adapter

1 Answer

Dell Dimemsion 9100 cannot connect to internet. Windows cannot repair the problem. Tried Windows and Dell drivers for network adapter with same results. Yellow caution sign on network icon.


Hi there

I can understand your issue.

When you same yellow caution i believe the network driver is not installed properly. To resolve this issue please go to device manager.

Locate for the network adapter and click on + sign to explore it.
Below that you can see your network device name, right click on and click uninstall.

Then reboot the computer and that will try to install the network driver ( It works in XP & VISTA). Cause XP & VISTA has the ability to load the default driver.

Then try to reinstall it and that should work.. If still the same issue kindly revert.......

Jan 14, 2010 | Dell Ethernet Card Network Adapter

2 Answers

I reinstalled WIN XP in my PC, now the NIC no is working, the ping at 127.0.0.1 is OK but can not go to internet


127.0.0.1 is a loopback ping, which won't really identify anything wrong with your NIC. Are you sure the drivers are installed for it? If so, check to make sure the TCP/IP setting is for Automatic IP. You may also want to uninstall, then re-install the drivers.

Let me know if you need any further assistance in this matter! :)

Oct 26, 2009 | IBM Intel PRO 19K5710 Network Adapter

1 Answer

MN-520 wireless adapter will not connect.


well!! I have an answer for you.your comp is loosing the IP address.first connect your computer via cable then goto start - programmes - accessories - dos prompt. type ipconfig.you`ll get ip address,subnet mask,default gateway.copy it. goto network and sharing center in vista and network connection under control panel in XP,IN Vista,click on view status,goto properties and double click on internet protocol(tcp/ip) or IPv4In XP,right click wireless network connection and goto properties and double click on internet protocol(tcp/ip).type in the IP address,subnet mask,default gateway.in DNS server address type the default gateway in primary DNS and in secondary 4.2.2.2. your connection won`t drop after this.

Jun 26, 2009 | Microsoft Broadband Networking MN-520...

2 Answers

Can't get my adapter to connect...XP is stuck with Aquiring a network address.


Have had this same problem. This worked for me. Remove the adapter, uninstall linksys, if it is installed, restart the computer, insert the adapter, when found new hardware comes up, let windows use the install wizard to install the adapter. Sorry to say, i have used this method on 5 pcs and it failed on only one. Let's hope yours will also be possitive. Good luck.

May 04, 2009 | Linksys Wireless-G WUSB54G 802.11g/b

1 Answer

Internet keeps defaulting to dialup connection vs. wireless


Go to Control panel > Internet Options> Connections tab >
check the "never dial a connection" bullet. Click ok.
Then you should be able to get online with that frustrating window.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Nov 29, 2008 | NetGear : WG111 54 Mbps Wireless USB 2.0...

2 Answers

Wireless connection to internet


Hi,
I just got it all working [new notebook running Vista], connecting to the net via the telkom 5102G - with a PC running XP connecting via LAN.

The 5102G comes ready configured with a network key / code [stuck on the back] so use that to connect to the router - once you've connected it'll come up with limited connectivity.

I then ran the firmware upgrade from http://www.telkomphones.co.za/5102g.htm
To do this, download and unpack the thing. In your browser, go to 10.0.0.2 [for the router config] and click on firmware and follow the instructions.

Once this is done - disconnect and reconnect the vista laptop connection. Open your browser and simply click on tools and uncheck the tickbox alongside "work offline".

I know that sounds ridiculous but that's exactly what I did and I'm surfing fine.

Now... just need to share files and printer and we're 100%.

Hope that helps.

Jan 16, 2008 | Computers & Internet

1 Answer

Try to setup home wireless network to share two home computer


Connect the home wireless network router box to the main PC through an ethernet cable with the PC powered off and the home wireless router powered off, then power on the PC & the router. Vista should locate the new wireless network and follow the windows vista network setup procedures. After the wireless network has been detected you then while the second PC's power is shut off you connect dongle adapter to the PC power on and XP will locate the new adapter. You will probably have to enter your networks pin for the connection.
Get back to me when you complete these steps.
Try next time contacting me through an online chat session. We can resolve the issue quicker while chatting together.

Nov 20, 2007 | Hawking Hi-Gain Wireless 802.11g/b...

1 Answer

Connected on Wireless but unable to connect on Internet


If not done allready, setup the lan IP address and default gateway in win98 Click MyComputer-ControlPanel-Network-Double Click TCP/IP Adapter for your 3com device-insert LAN info for IP Adress-subnet mask, Gateway and your Internet service providors DNS Addresses info Tab's (3x different Tabs "IP Adress" "Gateway" "DNS Configuration") IP Adress will be at least one number higher than your gateway address and not allready being used by other PC's on your network and gateway address will same as your router interface address subnet mask will be the same for all PC's on your network. For 3com and Netgear routers LAN setup is usually Gateway = 192.168.1.1 Subnet Mask = 255.255.255.0 IP Adress = 192.168.1.10(choose alternate number than 10 if allready used by another PC on your network, try to use round numbers, must be a number higher than 1) Once all info is entered click OK (this may trigger a database info update message and task)now your LAN is setup and ready to talk to your network Restart PC and try browsing again. May possibly require reinstallation of the TCP/IP client (you double clicked this to setup your LAN in Win98) or reinstallation of the IIS(Internet Information Services)component found in, Add/Remove Programs-Add/Remove windows components and then try LAN setup again if this does not work first time round

May 06, 2007 | 3Com OfficeConnect Wireless 11g 802.11g/b...

Not finding what you are looking for?
Motorola 2.4GHz Wireless G 802.11g/b (wpci810g) Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Computers & Internet Experts

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Motorola Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...