Question about Kidzmouse Nickelodeon Sponge Bob (KM009021)

2 Answers

My SpongeBob lazer mouse doesn't right click

My SpongeBob lazer mouse by KidzMouse (sold by nick.com) doesn't right click anymore what can I do? i bought it years ago in Oman. I live in Turkey. No one will accept it for repair at any repair shop. I love my spongebob mouse.

Posted by on

  • 2 more comments 
  • isa kocher
    isa kocher Jun 19, 2008

    no: no click

    and it doesn't right click on the computer either. Left click and lazer mouse works except that there is no way to "click" and the click doesn't sound any 'click' either

  • isa kocher
    isa kocher Jun 19, 2008

    I clicked the best solution answer by "guest" and came here and this has got squat to do with the question or the problem: It is spam.http://www.cliick-n-earn.blogspot.com/ spam blogger

  • isa kocher
    isa kocher Jun 19, 2008

    Thanks I'll check that out: I really appreciate the help. love and peace

  • Burns Milheron
    Burns Milheron May 11, 2010

    Does it make a click noise when you try to right click?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open it up and take that black rectangular piece off the white piece inside there is a copper colored piece make sure it is properly placed and there should be a little red "button" coming out of the black thing....make sure its sticking out so the blue mouse button reaches it .

Posted on Jul 05, 2009

  • jnt_rox Jul 05, 2009

    Mine broke just now.. and i tried to fix it but this is the best i did for now. It does not make the clicking noise but I can use it now.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

Ok, if you open up the mouse, there is a little piece of plastic that presses down on a button in the mouse, if the right click doesn't work, that little piece of plastic is probably broken. I know you like that spongebob mouse, but you'd have to get a new one. Check ebay.

Posted on Jun 19, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Computer does not respond to mouse. Move from pad


Do you mean you might used it on you lap rather than the desk and have changed the angle of the mouse? It will be the lazer, (if changing the angle of the mouse works). Disruptions occur with the lazer, hey they don't wear like a ball mouse does. You can have it repaired, just have to decide if it is cheaper or easier to just replace it. (Tip, don't leave it in direct sunlight when you are away from the computer. It shortens the life of a lazer mouse).

Nov 25, 2009 | Logitech Cordless Mouse

2 Answers

Right button doesn't work; single click with left button


You can probably repair this yourself if you are technically inclined and careful.

There is a tutorial here showing how to disassemble the mouse: http://www.vk2k.com/Logitech-MX1000-Battery/

The microswitches for the buttons can be opened if you are very careful, and then you'll have to clean the contacts. Regular rubbing alcohol should work fine. Be careful not to lose any parts when opening the switch.

If the switch contacts have corroded, you may have to replace the contacts or the entire switch. You may be able to take a similar switch from another mouse (many manufacturers use similar switches). SWometimes there are MX1000 or similar logitech nonfunctioning mice being sold on eBay for parts.

Good luck

Mar 03, 2009 | Logitech MX1000 Laser Cordless...

4 Answers

Mouse will randomly double click or have to click several times to work


Please check whether there are any buttons on the side of the mouse you may be clicking these at the same time as you are single clicking.

You could also try going into Control Panel --> Mouse
Try Slowing down the double click speed
If that doesn't work try speeding it up

Another problem with a laser mouse is it jumps around the screen randomly if there is a pattern on your mouse mat or desk, or if either are too shiny or even glass as the laser reflects incorrectly on these type of surfaces.

Oct 18, 2008 | Logitech Cordless Mouse

1 Answer

My computer is not decting my mouse anymore help


re install the driver for this mouse
  1. right click on my computer
  2. click on properties
  3. click on hardware
  4. click on device manager
  5. click on mic & other pointing device
  6. click on(+)
  7. then right click mouse
  8. click on update driver
  9. select second option in window(advanced)
  10. then click on( search removable.......)
  11. then insert driver cd in cd rom
  12. And click on Next option
If you have done this than do this
  1. select third option(Don't search.I will...............)
  2. And click Next option
  3. click Next option in next window.Thats it
Hope this solution works

Apr 02, 2008 | Logitech 9313960403 Mouse

1 Answer

Mini cordless notebook mouse


You both need to go here, click the link below;
http://www.logitech.com/index.cfm/support_downloads/downloads/&cl=us,en

If you can not find your Mini mouse look to the right for - Contact Technical Support. One or the other will help you acheive a fix for your mini mouse.

Good Luck & kind Regards.
& please vote.

Mar 03, 2008 | Logitech Cordless Mouse

1 Answer

Logitec Cordless Lazer Mouse buttons stick


Start by removing the battery cover.. there is a screw on either side of the battery compartment. this will allow you full access to the contacts for the buttons and the wheel Good luck

Dec 27, 2007 | Logitech 931249-0403 Mouse

1 Answer

Left click button not working correctly


Afraid it sounds like the mouse is the problem you can go into control panel, mouse, and change it round so u press the right mouse button to do the same thing. Sorry cant help anymore.. John

Sep 12, 2006 | Targus Kaleidoscope AMU0301 (AMU0301US)...

Not finding what you are looking for?
Kidzmouse Nickelodeon Sponge Bob (KM009021) Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kidzmouse Keyboards & Mice Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Kidzmouse Keyboard and Mice Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...