Question about Panasonic KX-TG1033S Cordless Phone

1 Answer

Panasonic moddel kx-TG6021

I have two handsets. Both are dead. I have tried unplugging the from the wall and the base and the still don't work. They don't ring and I cannot get a dial tone. The handset has the green light saying fully charged. And the sceen has my most recent numbers stored. But I cannot make or recieve a call. These are the main phones in my home and basically i am helpless without the. The phones that I have that are attached to a wire work fine. This problem happened all at once without any warning. Please help me I need my phones. My email is bettyjames478@bellsouth.net I have a warranty also on these phones. I have not had them a year yet.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Find a friendly neighbour an plug your cordless system into thier phone sockets and see if it works in another jack, if not take it back if its under warranty

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a Panasonic KX-TG1061C with 3 handsets. Handsets work perfectly. None of corded base unit buttons work.


to turn off night mode http://www.manualslib.com/manual/793900/Panasonic-Kx-Tg1061c.html?page=25
do not think night mode would cause your problem.
check dialing mode #120
TONE ?
When you unplugged the base unit did you pull out the ac adapter for about 30 seconds to reset the base unit ?

Jan 04, 2015 | Panasonic Phones

1 Answer

Panasonic KX-TG6700 Phone


test the adaptar if working try it in another phone
2) sure the the line cord is plugged firmly in the phone base
3) unplugged the phone base . Wait from 30 seconds, and plug it again. Allow up to one minute for the cordless handset and phone base to synchronize.
4) charge the batteries by 16 hours aprox.
5) if the batteries is completely dead can take 30 minutes before low battery appears on the screen.if doestnot work replace battery by new ones.
try agan.

Oct 03, 2012 | Panasonic KX-TG6700 Phone

1 Answer

How do i increase the volume on the handset? Model KX-TG6021


Hello

The handset navigator key can be used

to navigate through menus and to select
items shown on the display by pressing (UP) (DOWN) (REVERSE) (FORWARD) buttons on the handset.
Adjusting audio volume

Press UP or DOWN button repeatedly while
talking.
The last settings of volume level will be memorized when you switch OFF the habdset. OK.

Sep 07, 2011 | Panasonic KX-TG6021 Cordless Phone

2 Answers

We have Panasonic KX-TG6531, 4 handset. One unit is not working and shows on the screen: base no power. We lost a brochure for this phone and don't know how need fix this problem. Would you help us,...


Hi.
Even though You did not say how old these units are.?.this is a specific battery problem...
you can test it..take the other ones battery and replace problem unit's battery you will see that it will work..You can buy new battery at any Super stores.try to take one with warrant on it..
since you stated that you need an operating manual. pls visit the URL below to download one.
Hope this helps! Take care and please Remember to rate/vote and give me
4 Thumbs Up for me to continue for Helping out the Community :)
Thanks


http://phone.manualsonline.com/manuals/mfg/panasonic/kxtg6531.html

Jul 11, 2011 | Panasonic KX-TG4000B 4-LIne Multi-Handset...

1 Answer

I have telephone panasonic kx-tg6021bx i can answer but i can not call due to its writen on the scren dial lock


when it asks for unlock press 0000. it will get unlocked... othere wise without lifting the handset press *#1234

Dec 04, 2010 | Panasonic KX-TG6021 Cordless Phone

1 Answer

Can´t register handset . Panasonic KX-TG2620BX


I forgot dial lock, piease help me to open dial lock

Aug 31, 2009 | Panasonic KX-TG2620 2.4 GHz Cordless Phone

1 Answer

Phone keeps saying move closer to base


The handset may have unregistered from the phone. The instructions to reregister it are in the manual, but I'll list them here for you.

1. On the handset, press MENU 001
2. On the base unit
For models KX-TG6021/KX-TG6022/KX-TG6023
Press and hold LOCATOR until the IN USE indicator flashes.
For models KX-TG6051/KX-TG6052/KX-TG6053/KX-TG6054
Press and hold LOCATOR/INTERCOM until the IN USE indicator
flashes.
After the IN USE indicator starts flashing, the rest of the procedure
must be completed within 1minute.
3. Press OK on the handset, then wait until a beep sounds.
4. Press OFF on the handset.

Aug 29, 2009 | Panasonic KX-TG6021 Cordless Phone

1 Answer

Caller ID has aparently stopped working


Based on a user's review of this phone system on Amazon, I unplugged the base station, waited a few seconds and then plugged it back in. Caller ID display and announcement both work fine.

Mar 23, 2009 | Panasonic KX-TG5777 Cordless Phone

1 Answer

Semi Dead Panasonic KX-TGA100N with ''C533'' displayed.


Panasonic KX-TG1050N Cordless Phone. Base handset (No. 1, KX-TGA100N) does not work, no keypad response or dial tone. Green indicator message light ON (should only work with the TG1000N base unit) all the time till battery runs down. Display shows message ?C533?. Can still send and receive calls on extension phones 2 and 3.

Nov 11, 2008 | Panasonic KX TG1000N Cordless Phone

1 Answer

Answering system


It first sounds as if the handset isn't charged properly. Check the battery status first. The manufacture advises to charge the system for approx. 7 hours before any use occurs. Second, make sure that the registration took, when programming the phone originally. I would de-register the handset by: 1 {MENU} i {0}{0}{2} 2 {3}{3}{5} i {OK} 3 Select the handset you want to cancel by pressing the desired handset number ({1} ? {4}). Then re-register by: 1 Handset: {MENU} i {0}{0}{1} 2 Base unit: KX-TG6021/KX-TG6022/ KX-TG6023 Press and hold {LOCATOR} until the IN USE indicator flashes. KX-TG6051/KX-TG6052/ KX-TG6053/KX-TG6054 Press and hold {LOCATOR/ INTERCOM} until the IN USE indicator flashes. LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 3 Handset: Press {OK}, then wait until a beep sounds. 4 {OFF} Third, make sure that the display on the handset does not show "SP-Phone" in the display, if it does press the phone icon button. Fourth, Do you currently have voicemail from your phone service provider? If so, the answering machine will not answer. Make sure that the answering machine portion is turned on. Do this by: Press {ANSWER ON} to turn on/off the answering system. When the answering system is turned on, the ANSWER ON indicator lights. When the answering system is turned off, the ANSWER ON indicator turns off. If there are any further questions or comments, please post here. Please rate this solution through fix-it. Thank you

Jun 22, 2007 | Panasonic KX-TG6021 Cordless Phone

Not finding what you are looking for?
Panasonic KX-TG1033S Cordless Phone Logo

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Phones Experts

kakima

Level 3 Expert

96576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

guyvstewart

Level 2 Expert

82 Answers

Are you a Panasonic Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...