Question about Oster 6802 Osterizer Work Top Blender

Open Question

Hi, does Oster Threaded Bottom Cap - Black Model: 4902 fit to my old model Osterizer 867-50A ? Where to get it in Europe?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY OSTERIZER NEEDS A NEW RUBBER RING.


What model do you have? Without a model number I can't be sure but most Osterizers take this one.

Aug 16, 2011 | Oster Blenders

1 Answer

There is liquid leaking through the bearing on the base that adapts to the motor. Is there a service repair center in my area, my zip code is 60415?


Oster.com shows one Oster service center in Illinois:
(http://www.oster.com/ServiceCenters.aspx?state=Illinois)

Household Appliance Sales and Service 7034 North Milwaukee Avenue
Niles, Illinois
60714-3707
Phone: 847-647-8250
Fax: 847-647-2214

It's a roughly 45-minute drive from your zip code, according to Google Maps. You may want to call them with a description of your problem and see if they can service. There are also several locations in PA that will service Oster blenders.

Apr 30, 2011 | Oster 4093-8 Osterizer Classic Blender...

1 Answer

Where to buy glass jar for my osterizer pulse matic blender 10 speed


Try "The Gourmet Depot" website or search "small appliance parts" and find a site that carries the Oster blender part. You will need the model # of the blender.

May 20, 2010 | Oster 006832000000 10Speed Blender

1 Answer

Leaking from the bottom of the glass container through the screw


Check the rubber gasket for damage or hardening and also for chipped glass on the sealing surface. Make sure the ring is not cracked causing loss of compression of the seal.

Also check that the leak is NOT at the shaft seal. Replacement parts should be readily available,

Nov 08, 2009 | Oster 4093-8 Osterizer Classic Blender...

2 Answers

Osterizer blender problem


Is the black plastic part, seal, and glass portion snugly fitted together? If so, it's likely that the black plastic part isn't making contact with the pin. On mine I have to turn it about a quarter turn to lock it to the motor/ drive pin.

If I have a hard object such as ice cubes too firmed placed in the blender against the blade and the glass, I shake the container to loosen the materials and reseat it onto the drive pin as mentioned above.

May 09, 2009 | Oster 4134 / 4126 Classic Beehive Work Top...

1 Answer

HOW DO I REPLACE THE FUSE ON AN OSTER BLENDER MODEL 4094


unplug it.... use a small plastic screw driver or even a metal one if you are careful... pry gently up on one side of the fuse... it should pop out of the holder. when it does... use your fingers to grab the end and pull up. the fuse is replaced by placing it back into the holder and pushing down until each end pops back into the holder

Apr 11, 2009 | Oster 4093-8 Osterizer Classic Blender...

1 Answer

Poor function of my Oster classic blender


Yeah, the blades probably need to be replaced. The replacement blade assemblies for most models can be ordered directly from Oster - their phone # is 1-800-334-0759 - you have to go through an elaborate menu tree to get to the right place.

Apr 03, 2009 | Oster 4093-8 Osterizer Classic Blender...

3 Answers

Replacing the part that connects the motor to the blades on an Oster blender


I don't know if this will help or if this is what you are looking for. But today I was searching the web for the bottom piece that fits on the jar and saw this website has a lot of replacement parts for Oster blenders. Hope this is what you're looking for.
Good Luck
http://www.goodmans.net/get_item_os-070_square-drive-pin-for-oster-osterizer-blenders-shor.htm

Sep 12, 2008 | Oster 6803 14 Speed Blender

2 Answers

Osterizer


Thanks to some good leads, I determined the cause of the problem and ordered a part. Hopefully, that will resolve the problem.

Apr 23, 2008 | Oster 4134 / 4126 Classic Beehive Work Top...

1 Answer

Help with a Dismantled Osterizer Classic Blender


With the unit upside-down and the bottom off the wires on the right side of the switch go like this:
yellow on top
black on middle
red on the bottom

No wire connects to the 4th connection point (top left side).
R.

Aug 17, 2007 | Oster 4134 / 4126 Classic Beehive Work Top...

Not finding what you are looking for?
Oster 6802 Osterizer Work Top Blender Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oster Blenders Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Dave
Dave

Level 2 Expert

53 Answers

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers

Are you an Oster Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...