Question about Kenwood KDC-322 CD Player

1 Answer

Kenwood KDC-322 volume cutting out

I was given a 94 jeep cherokee with a Kenwood KDC-322 cd player in it. When I turn up the volume the sound cuts out. What would cause this? Do I need better speakers???

Posted by on

  • mikeyk365 Sep 30, 2008

    i have the same problem.. after rewiring the ground wire

×

1 Answer

There buggers rewire the earth/ground

Posted on Jul 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Don't know how to set the clock on a 322 model auto radio/cd player


Hi most player clocks are set by holding down the clock button then when it blinks it goes into adjustment mode then you use the volume button for the hours and tuning up and down for the minuets. Hope this helps Get it into tuning mode then its easy to work out

Nov 09, 2013 | Kenwood KDC-322 CD Player

1 Answer

Kenwood KDC-322


Go to auto technician and repair it.

Oct 22, 2012 | Car Audio Receivers

1 Answer

Yellow, red, and blue wires. Where does each go? Kenwood KDC-322


yellow wire is memory wire goes to 12 v source that is always on red wire is the ingtion wire so when u turn on key its turns on that goes to a ingtion source the blue wire is ethier amp or ant wire

May 22, 2010 | Kenwood KDC-322 CD Player

1 Answer

Power cuts out for approx. 3 seconds when volume is turned up above 20, the must be turned down or will cut out again.


it looks like you have a speaker going bad disconect all four speakers and conect one by one

Sep 30, 2009 | Kenwood KDC-MP232 CD Player

1 Answer

I turn up my kenwood unit and it cuts off and on until i turn the volume down when it powers back up


check the power and ground connections. sounds like the amp is starving for enough power.

Aug 11, 2009 | Kenwood KDC-MP528 CD Player

1 Answer

DCER error


the amp chip had died, service time

May 16, 2008 | Kenwood KDC-135 CD Player

1 Answer

DCER error


Every 1 of those i have gotten in service here the amp chip #KKZ10 REF# ic5

May 14, 2008 | Kenwood KDC-135 CD Player

1 Answer

Kenwood KDC-322


If you have the remote control for the unit, or can buy one then you can reset the code. Just ask me how...

Jan 09, 2008 | Kenwood KDC-322 CD Player

2 Answers

Kenwood kdc-322 faceplate problem?


I found my Kenwood KDC322 faceplate doing the same thing(cutting out) I cleaned the contact points on this 'ribbon' behind the faceplate by rubbing the discoloration off with a pencil eraser. The lights have not cut out again.

Apr 04, 2007 | Kenwood KDC-322 CD Player

Not finding what you are looking for?
Kenwood KDC-322 CD Player Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...