Question about Microsoft Windows XP Home Edition

1 Answer

Windows XP winsrv.dll file won't install

I am trying to install windows xp on a brand new computer. Installation starts and I get 60% done and it stops saying the winsrv.dll file won't copy. I try hitting "try again" but it doesn't load.

Now my brand new windows xp home won't complete--when it reboots it says it can't start because it's missing this file. How do I get all of the XP files to download? All is brand new and it was built from the ground up.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

Hi bcookie11,
if your windows xp installer is a legitimate one, return it and ask for another copy, sometimes, the cd is faulty, that is why you can't copy some files from it.

:)

Posted on Jun 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Microsoft updates do not install


You have not said which OS you are using so; from http://support.microsoft.com/kb/943144

When you try to install Windows updates from the Windows Update Web site, the Microsoft Update Web site, or by using Automatic Update, you receive a message that the update is not installed successfully. Additionally, the update is not displayed in the update history.

You may experience this issue in the following scenarios:

Scenario 1 You try to install updates after repair a Windows XP installation by using the Windows XP CD.
Scenario 2 You perform the following operations before you try to install Windows updates:

You perform a new installation of Windows XP Service Pack 2 (SP2).
You visit the Windows Update Web site, or the Microsoft Update Web site.
Note When you visit the update Web site, the latest version of Windows Update software will be installed in your computer.
You install Windows XP Service Pack (SP3) without a restart.
You try to install Windows updates after the install of Windows XP SP3.

Then cause ;

This issue occurs because the Wups2.dll file that is included in the latest version of Windows Update is not installed correctly.

For scenario 1, the registry entries that correspond to the Wups2.dll file are missing after the repair install of Windows XP. The release version of Windows XP does not contain the Windows Update software.

For scenario 2, the registry entries that correspond to Windows Update are changed back to the Windows XP SP2 version if you did not restart the computer before you install Windows XP SP3. The registry entries for the Wups2.dll file are changed to pointing to the Wups.dll file that is included in the release version of Windows XP SP2.
To resolve this problem, use one of the following methods;

Method 1: Download and install the Windows Update Agent,
For an x86-based computer; http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

For an x64-based computer http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

Method 2: Register the Wups2.dll file,

To have MS register the Wups2.dll file in Windows for you, go to http://support.microsoft.com/kb/943144#FixItForMeAlways.

If you prefer to fix this problem yourself,

To register the Wups2.dll file in Windows, follow these steps:

1. Stop the Automatic Updates service. To do this, follow these steps:
a. Open the Command Prompt window. To do this, click Start, click Run, type cmd, and then click OK.
b. At the command prompt, type the following command, and then press ENTER:
net stop wuauserv

2. Register the Wups2.dll file. To do this, follow these steps:

a. At the command prompt, type the following command, and then press ENTER:
regsvr32 %windir%\system32\wups2.dll

Note For a computer that is running Windows XP Professional x64 Edition, type the following command, and then press ENTER:
regsvr32 %windir%\syswow64\wups2.dll

b. Click OK if you receive a verification message.

3. Start the Automatic Updates service. To do this, type the following command at the command prompt, and then press ENTER:
net start wuauserv

4. Exit the Command Prompt window. To do this, type exit at the command prompt, and then press ENTER.

Jun 02, 2011 | Microsoft Computers & Internet

1 Answer

On the start of formatting there was no error but when it copies files on the the cd 57% then mpr.dll was missing then the program will ask if to retry or exit the installation? how can i solve the mpr.dll...


For installation to be completed, files must be complete. the error you recieved is because the file meant for installation is either missing or corrupt. the best is go to a repair or sale shop where computer accessories or components are sold not just any road side shop, request for XP installation disc. OR contact HP for disc.

Mar 28, 2011 | Microsoft Windows XP Professional for PC

2 Answers

I turned off my computer while it was removing sp2


Boot from the Windows XP CD and then choose R for repair. COPY C:\Windows\ServicePackFiles\winsrv.dll
C:\Windows\System32\winsrv.dll

Sep 05, 2009 | Microsoft Windows XP Professional for PC

3 Answers

C:\windows\system32\hauurjab.dll is missing on my


Just google the error msg and you'll find the solution for it. At most times, ppl recommend you to delete this particular registry file that is associated with this dll file. But if I were you, i would better reinstall the operating system. Just google the error and give a try. Best o'luck.

Hope this helps, If so, rate me.. ,thanks - billa

Sep 05, 2009 | Microsoft Windows XP Home Edition

1 Answer

Apssearchinterface not found


CAUSE
Windows XP SP3 introduces a new .dll file that is named Wlanapi.dll. This file is installed in the %WINDIR%\System32 folder. Certain device driver installations for some third-party wireless network adapters also install a Wlanapi.dll file in the %WINDIR%\System32 folder. If such a file is installed in this folder before you install Windows XP SP3, the Wlanapi.dll file that is associated with the network adapter is replaced by the file from the Windows XP SP3 installation.

RESOLUTION
To resolve this issue, check the Web site of the wireless network adapter's manufacturer for the latest device drivers that are available for a Windows XP SP3-based system. Then, download and install the latest device drivers for the wireless network adapter. Source(s): http://support.microsoft.com/kb/950720

Jul 07, 2009 | Dell OptiPlex 330 Desktop Desktop Computer...

3 Answers

Windows XP won't start


for that you need winxp bootabler disk.
Tehn boot your computer with tht and go to recoverry console.
Then type in command prompt "chkdsk /r"
then press "y"
then it fixc error on harddisk.
Then after completing it restart your computer and boot with harddisk then it ok.

Jun 20, 2009 | Computers & Internet

2 Answers

Windows system 32 hal.dll error after restoring e-machine


There's actually a number of reasons why these annoying little DLL errors happen, but the most common, is caused when new programs are installed over all old ones and the old ones are not completely uninstalled 100%, causing registry pile ups and of course, getting a .DLL error messages.

Another reason, is damage that's been done by malware/spyware/adware programs, attaching themselves to your PC and wrecking havoc, deleting crucial DLL files from your PC.

The hal.dll file is created during install from 5 other dlls. HAL is the Hardware Abstraction Layer and it's the interface between the system drivers and the actual hardware.

Copying hal.dll will not resolve the problem.

A lot of times the file will be reported missing due to corruption of the boot sector or of the file system

Causes of the "missing or corrupt hal.dll" error include, naturally, a damaged hal.dll file or a hal.dll file that has been deleted or moved from its intended location.

Additional causes may include a damaged or missing boot.ini file or possibly a physically damaged HDD.

Suggested remodies-

1. Restart the PC. The hal.dll error could be a fluke.

2. Check for proper boot order in BIOS. You might see the hal.dll error if the boot order in BIOS is first looking at a hard drive other than your main hard drive.
Note: If you've recently changed your boot order or recently flashed your BIOS, this may be what's causing your problem.

3. Run Windows XP System Restore from a command prompt. If this doesn't work or you're receiving the hal.dll error message before you're able to complete this process, move on to the next step.

4. Repair or replace the boot.ini file. This will work if the cause of the problem is actually Windows XP's boot.ini file and not the hal.dll file, which is often times the case.

5. Write a new partition boot sector to the Windows XP system partition. If the partition boot sector has become corrupt or isn't properly configured, you may receive the hal.dll error.

6. Restore the hal.dll file from the Windows XP CD. If the hal.dll file is truly the cause of the problem, restoring it from the original Windows XP CD may do the trick.

7. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.

8. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch.

Note: While this will almost certainly resolve any hal.dll errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.

Important: If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows XP.

9. Replace the hard drive. Finally, if all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive.

10. Perform a new installation of Windows XP after installing the new hard drive.

I have not tried it - but HERE is a free program purporting to fix the error.


Thanks for using FixYa - a FixYa rating is appreciated for taking the time to answer your FREE question.

Apr 10, 2009 | E-Machines eMachines Desktop PC

1 Answer

Been having this problem for 2 months.. computer is turned off... have been rebooting from CD in drive for 1 year... harddrive tired and cannot boot up by itself... lately cannot get to any Recovery mode,...


If you have a Windows XP CD, follow these steps.

1. Boot from the CD and start the installer
2. Choose to install onto the already formatted partition with the unbootable Windows, but opt to leave the existing filesystem and any other OSes alone. Choosing this will require you to create another folder for Windows to avoid writing over the existing installation. I usually call the new folder "WINXP."
3. Install Windows as you would normally, you'll need a Product Key but you can actually use your personal key on someone else's computer with no danger to you losing it or being accused of piracy, I'll explain this later.
4. Boot the NEW Windows XP install. Do not "Activate" or "register," you're going to be deleting this copy of Windows from the machine if all goes well.
5. Edit the BOOT.INI on the hard drive from the original installation of Windows with the corrupted HAL. This file should be in C:\ (may be hidden)

Sample BOOT.INI for XP Pro
Microsoft wrote:[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT

6. Go to C:\WINXP\system32\hal.dll (where "WINXP" is the folder you installed the second copy of Windows XP) and copy it from the new Windows to C:\WINDOWS\system32\hal.dll (or wherever you installed Windows XP originally, I use "WINDOWS" but some people use strange folder names for their XP) and overwrite any file there. The new hal.dll is uncorrupt and newly regenerated. The file is specific to each machine's hardware configuration and we needed to rebuild it. The installer did that for us with the new installation.
7. Try rebooting your computer to see if you can get into your OLD Windows installation. If you can, congratulations!
8. DELETE the "WINXP" folder (or wherever you put your new Windows install).

PS: Please rate this solution

Mar 11, 2009 | Computers & Internet

4 Answers

BLUE SCREEN W/ MESSAGE STOP: C000007B BAD IMAGE.


Try to look for your windows xp cd.
Turn the computer off. Restart it and start tapping f12 right after.
Insert the cd. Choose the option that says CD/CDRW/DVDRW from the screen and press enter. Watch out for a prompt that will say 'Press any key to boot from cd'. press any key as soon as you get this. If you miss it, you'll get the error again. You should get the blue windows setup screen if you caught it at the right time.
Wait until you get the 'welcome to setup' screen.
Press R.
Follow any other instructions that you may get until it gives you the C:\> prompt.
Type in bootcfg /rebuild.

Below is a listing of the common steps you are likely going to encounter.

* Prompt for the identified versions of Windows installed. When you receive this prompt press Y if the bootcfg command properly identified each of the Windows operating systems installed on the computer. It is important to realize this command will only detect Windows XP, Windows 2000, and Windows NT installations.

* Prompt to enter the load identifier. This is the name of the operating system for the boot.ini. For example, Microsoft Windows XP Home users would enter "Microsoft Windows XP Home edition". If you have Windowx XP pro edition, enter 'Microsoft Windows XP Professional'

* Prompt to Enter OS load options. When this prompt is received type /fastdetect to automatically detect the available options.
Then type 'exit'. and let the computer reboot. If you get two options for microsoft windows. Choose the one that says what you entered when you were in the recovery console.

If you are able to boot correctly after those steps, go to start>click run. Then type msconfig. Click ok. Click the boot.ini tab. Click 'check all boot paths'. Click ok or yes. click close and restart if prompted. You shouldn't get the prompt for two microsoft windows anymore.

Jan 02, 2009 | Dell Inspiron 1300 Notebook

1 Answer

Windows xp installation


HI,

Here is what the Media test failure check cable eiting PXE ROM means:
Iam sure when we were changing some settings with the BIOS you must have done something wrong.Just reemember if you changed some settings over there.

try change the boot-order in the BIOS
try to disable "network-boot" in the BIOS.

This issue is often caused by either an incorrect setting in BIOS or a bad boot device, such as a bad hard disk drive. To resolve this issue,Isuggest you go through the steps in document CH000229 relating to a similar error message.

Now coming to System32\ntall.dll unknown hard error:

Restart your computer. The ntdll.dll error you're receiving could be due to a one-time, temporary issue and a simple reboot may resolve the problem completely.

If the ntdll.dll error only displays when you use a specific software program, uninstall the program, reboot your computer, and then install the latest version again from scratch.
Update drivers for any hardware in your computer where updated drivers are available. Outdated drivers sometimes cause ntdll.dll errors.

Test your memory for damage. If you're receiving ntdll.dll messages, one possible cause could be a bad memory module in your system. Testing your memory will either identify a problem or clear your RAM of any responsibility.

Perform a repair installation of Windows XP. If individual software reinstallations fail to resolve the problem, a repair installation of Windows will replace the ntdll.dll file. Remember to install all Windows service packs and other patches after this installation.

Perform a clean installation of Windows XP. A clean installation will completely remove Windows XP from your PC and install it again from scratch. I don't recommend this step unless you have stepped through all previous troubleshooting steps and you're comfortable that the ntdll.dll error is not caused by a single program (Step #2). NOTE:a single program or plugin is causing the ntdll.dll error, reinstalling Windows and then reinstalling all of the same software may lead you right back to the same ntdll.dll error.

While extremely rare, if everything else has failed, including the clean installation from the last step, you could be dealing with a hardware issue with your hard drive. If so, replace the hard drive and then perform a new installation of Windows XP.

Apr 20, 2008 | Computers & Internet

Not finding what you are looking for?
Microsoft Windows XP Home Edition Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2878 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...