Question about Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner

2 Answers

My printer epson tx111 problem cartridge can not recognized if i used new cartridge can not recognized

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Same solution with netgate.

there's a trouble on your printer board or may be your connection between cartridge with printer is dirty. You can clean using printer cleaner. similiar with alcohol, but its not alcohol.

the power on cleaning is very strong.
For detail information you can go to
http://zoneprinter.com/error-tx111-tx111-did-not-detect-cartridge


Posted on May 10, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

There's a trouble on your printer board or may be your connection between cartridge with printer is dirty. clean it

or may be go to printer.biwox.com
there's many of trouble be discussed there

Posted on Feb 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson 1400 not recognizing an epson ink cartridge


not necessarily faulty cartridge - had same problem went thru various cartridges some worked some didn't - in fact they weren't epson - so bought epson from office depot and that would not work, so not an issue of ink dried up - if yr printer is fairly old may be easier just to replace rather than waste time and money on trying to figure out problem

Sep 13, 2013 | Epson Stylus Office Equipment & Supplies

1 Answer

My Epson Printer TX111 cannot recognise cartridge even after replacing with new cartridge


My guess would be that some damage or force was applied to the chips while the printer was being transported (it's NEVER a good idea to transport a printer with CIS installed btw).

It's also possible that the ink tubes were not clamped so freeflowing ink has soiled the inside of the printhead and/or the cartridge chips...

Really the only thing I can suggest is to clamp the tubes on the CIS, remove the cartridges, check the chips and the area inside the carriage where cartridges sit for ink leakage and/or damage.

WARNING: Be VERY careful not to damage or bend the wires in this cartridge bay are as they read the chips and are very easy to break or misalign... so take your time.

Hope that helps.
accessories for audi


Jun 12, 2012 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

My Epson scanner TX111 is not scanning properly but is scanning with a blue background for white blanlk paper.


your printer's black ink is empty already you need to change the cartridge or refill the black ink.

Jul 04, 2011 | Epson Stylus Photo RX700 All-In-One InkJet...

1 Answer

Epson Stylus NX415 does not recognize ink cartridges. Cartridges are Epson 88's. Worked for awhile, and then stopped recognizing them. Tried powering down the printer, cleaning the cartridges, turning...


Epson Printers are sensitive in terms of Ink Cartridges.. The latest Epson Printers does not have ink reseter.. Ink reseter are already built-in on the ink cartridges.. The problem on this printer is when you have a cartridge on your printer, let say, 30% of the ink level, even though your ink is new, and you change it without using the right ink replacement method, it will recognize your ink as a 30% ink level. When your ink level drops to 0%, but you have remaining 70% of the ink, it does not recognize it anymore. The chip on the ink cartridge is already registered as an empty cartridge.

May 28, 2011 | Epson Stylus NX400 InkJet Printer

2 Answers

Error general tx111


May be the trouble is on the cartridge. Change the cartridge.. I find ask question similiar with your question. Just go to http://zoneprinter.com/error-tx111-tx111-did-not-detect-cartridge There are some trouble on that web, also the answer to solve that problem

Nov 20, 2010 | Epson Stylus Photo R300 InkJet Printer

7 Answers

General error with epson tx111


mw tanya saya punya epson TX111 gimana cara mengatasi general error ketiga lampunya nyala bersama sama..mohon bantuannya...

Oct 10, 2010 | Epson Office Equipment & Supplies

1 Answer

Does not reconize non epson ink cartridge. I remove and reinstalled and it printed but now its back to not reconize cartridge.


You did not say if you were using "New-Epson Ink Cartridges", or actually using "Non-Epson Ink Cartridges" [Generic or Third-Party ink cartridges] in your printer. I'm assuming that you are probably using Non-Epson Ink Cartridges, because those are what normally cause that problem, with a printer not recognizing an installed ink cartridge. Unfortunatly, there is no way to make your Epson Printer use or accept that Non-Epson Ink Cartridge, if it cannot actually recognize it. Its even possible that some Generic or Third-Party brands, may not always be recognized by the newer models of Epson Printers, because of the inexpensive [cheap] and or incompatable Electrical Chips that are mounted on the actual ink cartridge. Sometimes you will even get Error Messages up on your Monitors screen, telling you that you are actually using a Non-Epson Ink Cartridge, or that your printer cannot recognize the cartridge that you installed. Sometimes the Ink Level Indicator, on your Status Monitor, will not show an actual ink level, but may indicate a cartridge error or problem instead. Not all Generic or Third-Party ink & ink cartridges are made the same and none of them actually contain the right formulation of ink, for the Epson Printers [formula is patented by Epson Company]. Some are probably close and seem to be better than others, but some simply can clog-up or even damage the Printhead Assemblies on Epson Printers, or simply won't be accepted at all. Epson Ink Jet Printers are one of the few printers on the market that seem to have so many problems with non-manufactors inks, especially the newer models made in the last couple of years. Its because the Epson Printers use a completely different printhead inking system than most other brands of printers. Most, if not all of the other manufactors, use thermal or bubble jetprint heads and because the other brands use a totally different system, they don't seem to have as many problems using refilled inks or non-manufactor's ink cartridges. Printer manufacters do not make available their ink formulation and in most cases, the formulation is patented. Any difference in the ink formulation can actually cause clogging in the small printhead nozzles or damage other critical components. One individual printhead nozzle is so tiny, that it will not accept a human hair, so you can see why they can get clogged so easily, or even why the nozzles can be so easily damaged...Even if you were actually using a New-Epson Ink Cartridge, its always possible that you got a bad cartridge. At this point, the only thing I can suggest is that you try a different New-Epson Ink Cartridge, or at the very least, a different brand of Non-Epson Ink Cartridges and see if that helps...Good Luck!

Jun 09, 2010 | Epson CX8400 All-In-One InkJet Printer

1 Answer

Epson Stylus SX400 "Ink cartridges cannot be recognized"


Try this: First check which cartridge(s) are not being recognized. In my case where I replaced all three color cartridges, two were recognized right away but one was not. You find out by sending a print request to the printer and looking at the ink cartridge levels diagram in the dialog window. In my case two of three were fine but one had a red X on it. So I removed it and cleaned the contacts with alcohol then rocked it in the slot after pressing it in. It was recognized and the charging process began as normal.

Nov 17, 2009 | Epson Office Equipment & Supplies

Not finding what you are looking for?
Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner Logo

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...