Question about Frigidaire GLTF2940ES Front Load Washer

1 Answer

I HAVE THE LTF2940ES0, WHEN I GOT READY TO DO ANOTHER LOAD, PUT ALL THE DETERGENT AND STUFF IN THE MACHINE AND CLOSED THE DOOR AND PRESSED START JUST THE SAME WAY I HAVE DONE FOR THE LAST 7 YEARS AND IT BEEPS AT ME AND SAYS "ERR" AND "LOC" AND ALL THE LIGHTS "WASH, RINSE, FINAL SPIN, AND CONTROL ALL LIGHT UP.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

"LOC" error means the controls are locked. This happens when the "options" and "select" buttons are pressed together. To clear it, press them together and hold for a few seconds. The "LOC" will flicker briefly, which means the controls are unlocked.
Apparently, this happens often, bc the buttons are very sensitive and easy to hit, given their placement.
I called Fridigaire service at 706/860-4110 and got a GREAT, pleasant service rep who looked up and gave me the answer in less than five minutes. What a rarity. I'm so glad I didn't pay $85 for a service tech to come out and press two buttons -- hope this will help you to avoid the same.
For any other error codes, go to the Fridigaire website and download their "Washer Tech Data Sheet", which lists error codes and diagnostic tests.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore elite smartwash quiet pak 9 he4t won't engage when start button pressed.


The start button operation could be erratic, indicating the need for replacement.

Dec 12, 2016 | Kenmore Washing Machines

1 Answer

What is hd code????


Hi Peter, If I understand your question correctly, you are asking what the code "HD" means for your machine. I am unable to find the code "HD", however, here is a list of the codes for these Maytag models, perhaps one looks similar to "HD". Hopefully this answers your question!

Washer displaying code messages
- "LF" (Washer is taking too long to fill)
Check the following:
Are the water inlet hoses kinked or clogged?
Are the water inlet valve screens clear?
Press PAUSE/CANCEL to clear display.
- "Ld" (Washer is taking too long to drain water from the wash tub)
Check the following:
Is the drain hose kinked or clogged?
Is the drain hose installed properly? See "Connect the Drain Hose." Press PAUSE/CANCEL
to clear display.
- "uL" (Unbalanced Load)
If the load is unbalanced, the washer will display this code while running an imbalanced
load correction routine at the end of the wash cycle and before the final spin. If the code
remains and the wash cycle dial is flashing after the recovery routine has stopped, open
lid and redistribute the load. Close lid and press START.
- "oL" (Over Load)
Is the washer overloaded? The washer has attempted to fill and begin the wash cycle. If
the washer is overloaded, it will drain any water and detergent that was added during the
fill. To correct the overload, remove several items and add detergent. Close lid and press
START.
- "Sd" (Suds Detected)
Did you use regular detergent?
Regular or hand-washing detergents are not recommended for this washer. Use only High
Efficiency ("HE") detergent.
Did you add too much detergent?
Always measure detergent. Follow detergent manufacturer's directions.
If excessive suds are detected, the washer will display this code while running a suds
reduction correction routine at the end of the wash cycle. The suds reduction routine
removes extra suds and assures proper rinsing of your garments. If the code remains and
the wash cycle dial is flashing after the recovery routine has stopped, re-select your
desired cycle using cold water. Press START. Do not add detergent.
- "lid" (Lid Opened)
Is the lid open? Close the lid to clear the display. If the lid remains open for more than 10
minutes, water in the wash tub will drain.
- "HC" (Cold and Hot hoses switched)
This code will appear at the end of the wash cycle to indicate that the cold and hot water
inlet hoses are switched. See "Connect the Inlet Hoses."
- "dL" (Door/Lid cannot lock)
Indicates lid is not locked. Check for items caught in the lid keeping it from closing. Press
PAUSE/CANCEL once to clear the code.
- "dU" (Door/Lid cannot unlock)
Is there excessive weight on the lid, such as a basket of laundry? Excessive weight will
keep the lid from unlocking. Press PAUSE/CANCEL once to clear the code.
- "F##" code
Press PAUSE/CANCEL once to clear code. Press START. If code appears again, call for
service.

May 01, 2014 | Maytag Bravos MTW6600T Top Load Washer

1 Answer

My he2t kenmore front load washing machine won't power on and there's a clicking noise


Vicki, i think that clicking sound is ok when you press start. TRY THIS.
1. close door securely 2. press power after putting detergent.3 After making your selction for different levels eg hot,warm cold, press START.
usually these buttons are pretty reliable, GL

Jan 12, 2014 | Kenmore Front Load Washer

1 Answer

Motor won't turn on Samsung VRT Plus WF433B*GJ**


,,


When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.

To add a forgotten item:
1. Press the Power button.
2. Press the Start/Pause
3. Wait for the door lock light to go out (Immediately).
4. Add the item, close the door, and press the Start/Pause
The door safety state continues for 15 seconds and the cycle is restarted.
ensure thorough cleaning,
To
Try washing bedding, towels, undergarments,
contact using the ActivFresh
GETTING STARTED
1. Load your washer.
2. Close the door.
Z_
Push the laundry into the drum completely to prevent the laundry from being caught in the door or
....... from falling out of the drum.
3. Press the Power button.
4. Add detergent and additives to the dispenser (page 20-21).
5. Select the appropriate cycle and options for the load (page 14-16).
6. Press the Start/Pause
7. The Wash Indicator light will illuminate.
8. The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining in the cycle.
The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
9. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a
quick drain.
,
When the cycle is complete, the door lock light will go out and "End" will appear in the display.

DO NOT attempt to open the door until the door lock light is off. To add a forgotten item, see
"Loading your washer" section (page 13).

When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle
continues.

Pressing Power button cancels the cycle and stops your washer.

The pre wash, wash, rinse and spin indicator lights will illuminate during those portions of the cycle

Nov 28, 2013 | Samsung 4.3 cu. ft. VRT Plus , Steam and...

1 Answer

Where do you put the dish wash detergent for my dish washer!


Hi, for most dishwashers the detergent cup is behind a little door in the door of the dishwasher.. snap open the door and place the detergent in the cup while the door is open and down, then close the little door and then close the dishwasher door...

then you are ready to roll...

DishwasherRepair Problem Detergent Cup does not Open

heatman101

Sep 19, 2010 | Dishwashers

1 Answer

Outer door dyson washing m/c


try turning screw under detergent tray?

Sep 05, 2009 | Dyson Memory CRO1 Front Load Washer

1 Answer

Kenmore Elite HE3 washer lights light but wash won't start


Sometimes I just have to unplug the machine, wait a few seconds and plug it back in and it works. I guess it resets itself or something.

Feb 26, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

My GE Washer Door Won't Lock


Try this, press the pause/cancel button twice. Open the door, ensure there is nothing blocking the door and close the door fully. Open the detergent drawer fully and re-close the drawer. Select Quick wash and press start.

If this does not correct the problem, call for service under warranty.

clarkco

Feb 19, 2009 | GE WBVH6240F Front Load Washer

1 Answer

Maytag neptune front load washer wont start when button pressed


This is joyce

first lets start simple unplug the machine and leave unpluged for 1 min. replug back, see if this solves the problem.

thanks,



joyce

Feb 06, 2009 | Maytag MAH6500 Neptune Front Loading...

1 Answer

Washer won't start/lights on


ok try first to make sure the detergent drawer is closed tight if its not will stop washer is the door locked some times you have to close them firmly make sure the lock light is on hit pause cancel twice then try washer

Dec 30, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...