Question about Whirlpool Ovens
I live in apartment with a Whirlpool dishwasher and oven. Today was my first day to do automatic clean. After two minutes the "F5SEI" would pop up, then the door would unlock. I repeated this a couple of times. My mind wondered about a water source; perhaps the dishwater. Fortunately, I had a load of dishes ready to go. So I started the dishwasher, then the automatic clean on the oven. Behold! They work together like homies :)
Posted on Jul 03, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
HI. This will indicate that the door lock mechanism is damaged. follow the procedure below to address further.
If the door is latched:
A. Disconnect power from unit.
B. Check wires and connectors from control to door switch, then from door switch to control. If there is no damage to the wires and all connectors are okay, proceed to step C.
C. Replace door switch.
D. Re-apply power.
E. Press and hold any key down for 1 minute to clear F5 failure code from memory. F2 will appear. Press CANCEL and observe for 1 minute to ensure operation is correct.
NOTE_ This will, normally, lead to the replacement of the door latch assembly.
Posted on Nov 20, 2009
Make sure that the door latch is completly locked and then try again. If it is locked and you are getting this code the door latch assembly is bad. The oven sensor would be fine since you get no codes during normal baking. Problem is in door lock system
Posted on Feb 28, 2010
SOURCE: my oven code is F5E1
F5E1 is door latch assembly. One way that may work to unlock is to turn circuit breaker to stove off for few seconds then turn back on and door lock should activate and unlock. If not you are going to have to replace the door lock assembly.
Posted on Mar 03, 2010
Thanks for using FixYa. This error means that you’ll need to check the door latch/switch and replace the part that has gone bad. Please do rate the solution if the issue is resolved or post a comment for further assistance.
Posted on Jul 10, 2010
The F5E1 error codes means that the door light switch OR a switch on the self clean latch has failed. If the oven light comes on and goes off when the door is opened and closed it most likely going to be a switch on the latch thats the problem.
The part numbers are;
DOOR LATCH W10107830
LIGHT SWITCH 3195993
Posted on Aug 28, 2011
Tips for a great answer:
May 12, 2014 | Whirlpool 30" Self-Cleaning Freestanding...
Aug 28, 2011 | Whirlpool 30" Self-Cleaning Freestanding...
Before you go working too hard to get
you oven to go into the self clean mode(self destruct)....check out
Self Cleaning Oven Problem
" Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!!
Jan 19, 2011 | Whirlpool Ovens
Dec 17, 2010 | Ovens
Mar 28, 2010 | Whirlpool 30" Self-Cleaning Freestanding...
Mar 03, 2010 | Whirlpool 30" Self-Cleaning Freestanding...
Feb 28, 2010 | Whirlpool RBS275PD Electric Single Oven
Dec 11, 2009 | Whirlpool 30" Self-Cleaning Freestanding...
Nov 19, 2009 | Whirlpool Ovens
Aug 02, 2017 | Whirlpool Ovens
1,903 people viewed this question
Usually answered in minutes!