Question about Televison & Video

1 Answer

I have a daenyx tv. It is only one year old and I am not getting any response as in picture and sound. I also am not able to load a DVD. The power button does come on, can you advise to what the problem may be.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 10,515 Answers


Unplug the TV for few minutes, say 15 minutes and then try to turn it ON. If it still remains dead, it is an internal failure and needs to be repaired. If the TV is under warranty, contact manufacturer and get it replaced / repair without any charge. However, if it is out of warranty and you wanted to repair it yourself, revert with model number and we could start repairing.

Few details to be noted :-

1. You should have electronics repair experience.
2. Use of multimeter and soldering iron could be there.
3. You need to take all precautions.

I could only guide you.

Let me know,so that we could proceed.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Nov 14, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is tv code for daenyx

You will need to provide the make and model of the remote control device that you are using to control the Daenyx DN-26D.

Sep 19, 2014 | Daenyx DN-26D 26-in. LCD HDTV/DVD Combo

2 Answers

Insignia 37 sound after lightning storm and HDMI's are not working

Dude! You fried it! Sound board can be replaced, but what else was stressed? Replace it, use a good surge protector, and turn the thing off during storms, light a candle and cuddle with your sweetie.

Jul 15, 2014 | Insignia Televison & Video

2 Answers

TV turns on; no other response

That clearly sounds like you have an audio/video board failure in the unit. I have seen Sony $2,000.00 dollar TV's do the same. The fact your getting Blue backgroung lighting is indicative that the panel is putting out light and you do have good power board connection. As a final test connect a dvd player to the inputs and see if you get the DVR screen display if negative get the TV replaced since it is only a week old.
I was a Sony Field engineer for a year on all TV models.

Dec 31, 2012 | Coby Televison & Video

1 Answer

I have a Daenyx 40"

Not familiar with the


brand, but the symptom you describe sound like a faulty capacitor in the power supply. Capacitors act like batteries. They store power and give a good solid source of power. When they go bad they will short out to ground. Unplugging the set will temporarily refresh a bad cap a couple times. Normally if you look at the round can looking parts on the power supply the bad one or ones will be bulged on the tops and or leaky. Hope this helps. :)

Apr 28, 2017 | Televison & Video

1 Answer

No picture on my tv

get a different tv but sel it first

Jan 11, 2009 | Televison & Video

3 Answers

Remote control code for a daenyx tv

My Daenyx DN-191 D TV remote stopped worked after a while. I didnt get one universal remote that works with this piece of junk. I called their customer service at 1-877-329-8351. They said the remote will be $30 + $7 (shipping) + tax. Your best bet will be to buy a replacement remote or better toss this junk off the window.

Jun 28, 2008 | Televison & Video

1 Answer

TruTech 19" LCD TV+DVD

I have a sansui 19" LCD TV+DVD
I had to attempt multiple times turning the TV on to get a picture. The sound was fine. This kept happening when I would go to turn on the set the TV kept playing fine with picture & sound but after the 2nd attemts I turned it off & then tried to turn it back on which took multiple attempts, it kept playing for a few minutes then the picture went out but the sound was still there.
The set is not yet 2 years old.

Mar 13, 2008 | TruTech PLV1615T 15 in. LCD Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides