Question about Sylvania LC320SLX 32 in. LCD TV

1 Answer

Won't come on, goes into standby mode. - Sylvania LC320SLX 32 in. LCD TV

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Master
  • 225 Answers

I recently repaired this exact TV that had a similar problem. First take the back cover off and check all the electrolitic capacitors on all the boards to see if they are bulging or leaking (if so replace them). If they all look good you can unplug everything from the Inverter board. The inverter board has the pink and white wire plugs going into it. Then try to power on the TV and if the green light comes on, and stays on, then you know the problem is in the inverter board. My problem was in the inverter and I found Q1500 (N Channel MOSFET) shorted Gate, Drain, and Source together. You can check that with an ohm meter. Just for safe measure I also replaced Q1550 and it is the same exact part as Q1500. Here's the link to the part so you can order it:

http://www.newark.com/stmicroelectronics/stp17nk40zfp/mosfet-n-to-220fp/dp/26M3680

Posted on May 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to power on bypass standby mode


Hold in power button for few seconds

Sep 02, 2014 | Televison & Video

1 Answer

My p315 speaker stays on standby and won't power up?


some design need audio signal in to get it wake up from standby mode.

Oct 25, 2012 | Acoustic Research P315 HO Speaker

1 Answer

My symponic tv is in standby mode and won't turn on


check for defective regulator at the power supply section and shorted horizontal section. if you don't have an idea how to trouble shot this unit i suggest to leave it to a trained tv repairman to fix the problem. atleast you have an idea what to expect when you hire somebody to do the job good luck.

Sep 17, 2012 | Symphonic ST419E TV

1 Answer

My 50in won't turn on


might have to change the bulb in the tv, should be in the back right corner should tell u something like a warning lable so u can find it,u will need a screw driver.

May 28, 2012 | LG 50PK250 50 HDTVReady Plasma TV

1 Answer

Sony FD Trinitron WEGA..won't turn back on TWO Blinks---B+ over current protection (OCP) , unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of an


Visit this site for details. All information about this type of fault [2 blinks of standby light to sony Trinitron]; are described here in detail.
"Electro-help", is the name of the site.
Search for it on Google.

May 02, 2012 | Sony FD Trinitron WEGA KV-30HS420 30" TV

1 Answer

Sony kv36xbr800 won't turn on -standby blinks 2 times pls help


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Apr 22, 2012 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Philips HTS6100 -seems to be stuck in Standby Mode....won't actually do anything! Any ideas?


Your unit maybe on protect condition that why on standby mode,,,it means theirs a truoble in circuit inside that why happened...try to consult in the nearest service cnter or a wll trained technician,,wish you luck

Feb 19, 2012 | Sony Audio Players & Recorders

1 Answer

TV won't turn on. flashes a series of 5 red lights instead of turning green


Usually Sony and LG Blinking Codes are the same. Here is what I have.
  • Unit is dead, No blinks - Problem in the standby power section. Might check fuse,
  • Continuous blink once a second, no pausing - No reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective.
  • One blink - not used for the self-diagnosis
  • Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.
  • Three blinks - B+ over voltage protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit,
  • Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted.
  • Five blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. In addition, unit could be in IK blanking, try turning up screen slightly.
  • Six blinks - No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately.
  • Seven blinks - High voltage shutdown. The high voltage has exceeded 33k and the unit goes immediately into safety shutdown. Check power supply regulation and horizontal circuits.
  • Eight blinks - Problem with the audio (AUDIO), unit goes to standby and blinks the self-diagnosis code.
  • Nine blinks - Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing Make sure the regulator is -12 or -13 (negitive).
  • Ten blinks - Check Q8014 and Q8013 for shorts, leakage, or bad solder connections on the " D" board. If the transistors are bad, check R8051 and IC8005, also on the "D" board.

Nov 26, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

My TV is going into standby mode whenever it is turned on


My screen turns black and the TV goes into standby mode (I get an Amber Light) within 3 seconds after turning the TV on.

Dec 16, 2008 | Televison & Video

Not finding what you are looking for?
Sylvania LC320SLX 32 in. LCD TV Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...