Question about Bushnell Trail Sentry 11-9200 Digital Camera

1 Answer

I just bought a Tasco Digital Trail Camera - 119223C . During the setup my camera display also shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means?

Posted by on

  • 6 more comments 
  • mrgrimm96
    mrgrimm96 Aug 30, 2012

    Iam also havin same issues with mine, it turns on flashes but no pics on card and wont record video

  • jaradweeks
    jaradweeks Jan 21, 2013

    Your card is locked. take out card look on the side of it. There is a small white tab on the side. Slide in unlock position.

  • jeremyowens2
    jeremyowens2 Feb 17, 2013

    Thanks. I was racking my brains trying to figure this out. It locked up on my in the field yesterday. I'm kicking myself for not know it was something so easy. UGHHH. Thanks guys!

  • Jon Reed Sep 13, 2013

    ok cards not locked but camera stilll says that it is what is it

  • Anthony Jordan
    Anthony Jordan Sep 27, 2013

    on the outer edge of the SD card( I found out the hard way ) is a slide lock/right protector lock that prevents accidentally erasing it. Mine was accidentally switched on.. not to sure if all SD cards have this, but I am willing to bet they do...

  • bruce
    bruce Oct 25, 2013

    my problem is that when I slide the sd card in, it goes to the lock position

  • not applicable
    not applicable Oct 30, 2013

    his right if if you dont want the item send it to me

  • Bridget Reesh
    Bridget Reesh Aug 07, 2016

    I had the same problem-on the side of the sd card is a slider if it is pushed up it will lock just slide it back down and the loc will disappear on the trail camera



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!

Posted on Apr 10, 2011

  • Mike Bolgar
    Mike Bolgar Oct 31, 2014

    This happened to me too a couple of times. The problem is that your card does not have a good contact. What you can try is turn the camera off and push on the card just like you want to remove it except this time just keep pushing it about 10-15 times and hopefully this will clean the contacts. It worked for me.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Display shows loc and sd card flashes

Remove the SD card and look for a very small switch on the side of the SD card my guess is that it is in the lock position.

Aug 07, 2016 | Tasco 5MP Infrared Trail Camera

1 Answer

My tasco trail cam boots up with 4 dashes on display. Nothing else.

When you hit enter does it change the dashes to zeros? Default code is 0000

Apr 27, 2014 | Bushnell Trail Sentry 11-9200 Digital...

1 Answer

Cam says loc

The LOC message means that the slide switch on the the SD card is LOCked! The camera cannot store pictures on the SD card until the slide switch is in the correct (unlocked) position. I had this problem, as well!

Jan 19, 2014 | Stealth Cam Stc-sk724 Skout 7 Scouting...

1 Answer

Display reads "LOC"

The SD card has a little switch on the left side (Lock/Unlock) that provides write protection for the card. The switch is in the Locked position and the camera can't write to the card. Remove the card and move the switch to the unlocked position (towards the contacts on the end you insert into the camera). Then replace the card carefully so that you do not change the position of that switch.

If that doesn't work, try another SD card.

I hope this helps.

Cindy Wells

Nov 17, 2013 | Wildgame Innovations Axe 2 2Mp Game Camera

1 Answer

My moultrie trail game camera d-40 will not store pictures on memory card. I have tried multiple memory cards. The card I have been using is not very old and has worked fine until now. Camera is showing...

Is the small switch on the side of the SD card pushed up toward contacts? Has the card been formatted by a PC(A NO-NO)?
Remove card;turn camera on..go to setup; press up arrow once to get "DELETE ALL IMAGES NO?";press select button to get flashing "NO"; press up or down button once to change flashing NO to flashing YES; press select once...should get "DONE";press select until back in "SETUP...Turn camera off insert SD card and try again...may need new SD card.

Oct 24, 2011 | Moultrie GameSpy 4.0 Digital Camera Deluxe

1 Answer

I just bought a tasco trail camera. I set it up by the manual that came with it. It will take a couple of pictures and then it seems to shut off. If I take the batterys out and reinstall them it will work...


Are the batteries fully charged? It is recommended that you fully charge the batteries first before you use the camera as the camera can literally eat batteries.

If you have fully charged the batteries and the camera still only allows you to take a few shots then I suggest that you take/send the camera back and have it replaced.


Apr 28, 2011 | Cameras

3 Answers

Where do i find a manual for a tasco model 119223c game cam

Aug 11, 2010 | Cameras

1 Answer

Trail Sentry 11-9200 Digital Camera: I bought this camera from a store that used it as ...

Bushnell recommends to only remove or insert cards with power off, or it can damage the SD card.

Borrow an SD card that fits in your camera and test it. If this solves the issue, buy a new SD Card here.

May 16, 2010 | Bushnell Trail Sentry 11-9200 Digital...

Not finding what you are looking for?
Bushnell Trail Sentry 11-9200 Digital Camera Logo

3,182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Cameras Experts

Brad Brown

Level 3 Expert

17328 Answers


Level 3 Expert

80608 Answers


Level 3 Expert

3960 Answers

Are you a Bushnell Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides