Question about InFocus ScreenPlay 61" Rear Projection HDTV

1 Answer

InFocus 61" dlp i can

Posted by on

  • Giovanni Latona
    Giovanni Latona Nov 21, 2010

    thank you for your help

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Hi.

If the screen convergence cannot be fixed using convergence settings, then the convergence ICs must be replaced. The convergence ICs are two power amp chips located in convergence circuit inside TV. Replacement is done de-soldering old ICs and soldering new ones in place, possibly using coolant paste and testing and replace any other component in convergence circuit that is eventually failing .

The repair cost ranges between about $150 and $250. The ICs are not expensive, from $15 to $30 each.

To locate a qualified technician or to get parts click here: Home - Customer.

Regards.

Ginko.

Posted on Nov 21, 2010

  • Ginko
    Ginko Nov 21, 2010

    Hi.

    You are welcome.

    Have a good day.

    Ginko.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can infocus IN1100 be installed upside down?


The only option for screen orientation is left-rght and right-left , and there doesn't seem to be an upside down option. So you are probably correct in that it cant be used upside down.

Jul 28, 2011 | InFocus IN1100 DLP Projector

1 Answer

I just replaced the lamp on an Infocus X10 DLP projector. The left half of the screen is now darker than the right side. What can this be? Thanks.


This is seemingly a common issue on the IN82 (which I've also had) and is usually resolved by switching off the 'BrilliantColor' setting in the menu.

Nov 09, 2010 | InFocus X10 DLP Front Projector 1080p DLP...

1 Answer

Dlp 61md10 Has a black screen i have sound but no picture


The same thing just happened to me today. I finally disconnected the power cord from my 61md10 for a few minutes, then plugged it back in and turned it on. Not sure how this fixed it, but when I changed the input back to HDMI, the black screen was gone and I was getting a hi def picture again.

Jul 25, 2010 | InFocus ScreenPlay 61" Rear Projection...

2 Answers

Infocus dlp 70+, there is a dark yellow line from


this is the light tunnel being out of adjustment or collasped.

Mar 11, 2010 | InFocus LP70+ Multimedia Projector

1 Answer

There is a shadow in the upper left corner of the screen


someone is going to have to look inside by either removing the rear upper part of the set or removing the entire front screen---neither is easy to do. But considering your trouble I would not be surprised if the mirror is cracked---the entire front screens would have to be removed to replace the mirror--special mirror and special handling--I have seen several break when someone is not careful putting in.

Aug 22, 2009 | Televison & Video

2 Answers

Infocus 61 inches DLP-HDTV.


Infocus was always made by RCA for infocus the parts are straight RCA be warned that the parts for the RCA dlp's are very exspensive

Mar 04, 2009 | RCA HD61LPW42 61" Rear Projection HDTV

1 Answer

InFocus ScreenPlay SP61md10 (same as RCA HD61THW263)


I hope you are still under warranty. This is usually a problem with the main DLP chip seating properly on the board. I have rarely been able to correct this without getting a new engine board and DMD (digital mirror device).

Jul 15, 2008 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

NFocus ScreenPlay 61md10 61 does not recognize remote


on the universale remotes it tells you on the back of the package what tvs it will and wont work with.

Oct 20, 2007 | InFocus ScreenPlay 61" Rear Projection...

1 Answer

61 in dlp InFocus


Check powersupply board for loose connection.

Sep 05, 2007 | InFocus ScreenPlay 61" Rear Projection...

Not finding what you are looking for?
InFocus ScreenPlay 61" Rear Projection HDTV Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top InFocus Televison & Video Experts

Donni Steen

Level 3 Expert

659 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

rostit

Level 3 Expert

498 Answers

Are you an InFocus Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...