Question about Canon PowerShot A630 Digital Camera

1 Answer

When I turn it on, the green light blinks once and then goes dark and does nothing.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Posted on Nov 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV powers on, picture blinks once, screen goes dark with green power light remaining on steadily


What is the brand name and model number to your TV? Provide more details, please. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience.
http://electronicshelponline.blogspot.com/ Pull up older posts there.

Mar 25, 2014 | Televison & Video

1 Answer

Willl not turn on


It may be stuck in a cycle. Try removing the battery and power unit. Press the power key repeatedly for around 15seconds. Plug in the charger and power on.

Dec 03, 2013 | HP Mini Computers & Internet

1 Answer

I recently fixed the blinking green light problem following advice here. Now, about a week later, when I turn on the tv, I get image for a few seconds and then the screen goes blank/dark. Green light...


i have the same problem. i just replace the power board because of the "green blinking" light. now, light stays green, picture comes on for a few seconds, then blank....

did you fix your problem.

Aug 31, 2010 | Sharp Aquos LC-37G4U 37 in. HD-Ready LCD...

1 Answer

THE EXACT SAME, NO POWER NO GREEN LIGHT


I have a similar problem in that when I turn the switch on the back on, the green led at the front blinks once and then stays dead.
If I put my hand over the IR pod [block all light from it] and then turn the back switch on, the led blinks once and then goes into standby mode and from then I can turn it on normally with the remote etc.
Weird hey.

Jun 28, 2009 | Altec Lansing VS3251 Speaker

1 Answer

Drive stopped working


I had the same problem - green light on power cord but when plugged in the green light would go off and the hard drive would do nothing. I took it into Geek Squad finally and it turned out that the problem was hard drive casing, which I had to have replaced.

Jun 07, 2009 | Western Digital 500GB ELEMENTS 500 GB USB...

1 Answer

Screen dark,wont stay on. 52hm95


Here's the online manual for your TV:

http://www.tacp.toshiba.com/tacpassets-images/models/42HM95/docs/42HM95_om_e.pdf

Read the section about the red/green lights in front. It sounds like the lamp went out. Mine consistently goes out once every year to year and a half. If you plan on keeping the television, purchase two bulbs, so you have one on hand in case your new one goes out.

Good luck.


Apr 19, 2009 | Toshiba 52HM95 52" HDTV Projection...

1 Answer

Blinking green light, will not power up


my 55613 tv wont turn on just blinking green light

Sep 18, 2008 | Mitsubishi WS-55613 55" Rear Projection...

Not finding what you are looking for?
Canon PowerShot A630 Digital Camera Logo

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1923 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...