Question about Televison & Video

1 Answer

Convergence problems? 3 flashing led

Hi Dan
No the tx-47p950a was purchased in australia
Hope you can find some answers for me
thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Thanks for the update. Unfortunately, I don't have access to Australian models here in the US.

Check the following (generic troubleshooting)

1) Check the Horizontal Output Transistor for a shorted condition
2) Check the main board for poor solder connections and resolder as necessary.
3) Check the area of the convergence IC for pico fuses and be sure that they are OK. There may be low valued resistors there rather than fuses.

Keep us posted.
Dan

Posted on Jun 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The hi temp wash and air dry lights are blinking on my firgidaire dishwasher


Hi Dan, this is AP!

I understand you are experiencing some trouble with the lights on your Frigidaire dishwasher. On your particular model, FFBD1821MW, if there has been a power failure, then the "Hi-Temp Wash" and "Heat Dry" LEDs will flash. In order to stop the LED lights from flashing press Start/Cancel. This process should relieve your concern regarding the LED lights flashing. I hope this information proves helpful to some degree.

Best of luck,

Mar 25, 2014 | Frigidaire Dishwashers

1 Answer

Broken screen


Parts Dist Cititronics / Panason St Louis Mo
1 800 846 2484.

please give me a rating for this info.
thanks
daniel.

Jan 13, 2009 | Panasonic PT-53WX53 53" Rear Projection...

3 Answers

SONY KV-25X5U, TURNS IT'S SELF OFF AND STAND -BY LIGHT FLASH'S?


The standby light should be flashing in a repeated count with a short pause between the counts. If you could post that count here, it will give us an indication of the circuit in which a problem was found and allow us to provide solutions.

Thanks,
Dan

Oct 10, 2008 | Televison & Video

2 Answers

Saeco Magic De Luxe Espresso Machine - i need to purchase a new water container. where can i purchase one in Sydney?


Hi,

Try to contact Saeco Australia.

Saeco Australia Pty Ltd

6/87 Newlands Road Reservoir
Victoria 3073
Australia
Tel.: +61 3 94624949
Fax: +61 3 94624955
E-mail: info@saeco.com.au

Hope this will help you.
/Mirran

Aug 10, 2008 | Saeco Magic De Luxe Espresso Machine

1 Answer

HOW TO FIX CONVERGENCE IC FAULT & HOW MUCH COST APPROX


Panasonic Flashing codes:
1: ----------------- +140 v.
2: ----------------- Low DC
3: ----------------- Convergence
4: ----------------- HHS
5: ----------------- IC 4011
6: ----------------- IC 4018
3 is convergence, either one of the two convergence ICs faulty, or something else (capacitor etc.) has blown on convergence board.

Jul 13, 2008 | Televison & Video

1 Answer

3 flashing led


That model number does not come up as valid for me. Is this set in Europe?
Dan

Jun 18, 2008 | Televison & Video

1 Answer

Led flashing 3 times,


Please post the make and model as each has their own blink code. I can provide more detailed info once I know the make and model.

Thanks,
Dan

Jun 18, 2008 | Panasonic Televison & Video

2 Answers

Panasonic rear projection tv convergence problem


Check the regulator and convergences ICs....accordianman

Feb 26, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73150 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

71856 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...