Question about Uniden BC340CRS Base Scanner

1 Answer

How do you progam freguencies into my scanner

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

To program a known frequency into your scanner:
- Power the scanner ON
- Press the E/PGM key
- Enter the number of the channel to be programmed
- Press HOLD
- Enter the frequency, including decimal point
- Press E/PGM to store the data in the scanner's memory

To continue programming, press the up or down arrow to advance to the next channel.

Press HOLD or SCAN to exit the programming mode.

More detailed programming instructions are in the factory operating manual which you can download and print, at no cost, here:
http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC340CRS%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set up


You may download a copy of the manual here. Clock setup instructions begin on page 7, scanner programming instructions begin on page 11.

Aug 29, 2012 | Uniden BC244CLT Base Scanner

1 Answer

Where do i get a list of channels,codes or freguencies from so i can reprogram my scanner


There are several websites and books you can buy. I would try 'radio reference DOT com' for your state. Realize that your scanner CANNOT do DIGITAL, so if there is a digital system in your city/county/parish, your radio will not work. It will however still work on weather, Skywarn, ham radio frequencies and some more rurual police, fire and businesses.

Nov 09, 2010 | Radio Shack Pro-82 Scanner

1 Answer

Lost installiation disc for 6678-A3A Scanner. Is there a progam to download to replace it?


The most important thing in the installation disk was the scanner driver used to communicate between your PC and the scanner. The scanner will not work without the driver. Download the driver from the following link.

http://www.bioticaindia.com/6678-a3a.html

Oct 28, 2010 | Computers & Internet

1 Answer

Trying to re-progam a uniden nascar scanner


Step by step programming instructions are in the factory manual which you can download and print, at no cost, here:

http://www.uniden.com/pdf/BC60XLTom.pdf

Bill B.
Listening in since the 60's

Oct 18, 2010 | Uniden BC60XLT Handheld Scanner

1 Answer

Cant get radio to work dont know how to progam it


Here is a link to the owner's manual:
http://www.uniden.com/pdf/BC340CRSom.pdf

Feb 24, 2010 | Uniden BC340CRS Base Scanner

1 Answer

Hi, thanks for helping me in the past. However, I need your help to configure my scanner with the Casio TE-4500F my scanner is PSC VS 800 I tried to progam the scanner using the manuf progam book I was...


Has your register been setup for a scanner before? It must have had the scanning PLU file setup by the original programmer as that is the only time the file can be allocated. Then you need to have the I/O setup correctly for the scanner port in the register and you need the scanner to have parameters set to the typical Casio standard, so it is no quick job unless you have done most of this or had it done for you.

Feb 24, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

I want to know what the frequencies are in the digital range what i mean is,like what a digital freguency is


a digital frequency is normally one that is trunked by a digital trunking system. You will need to know what type of trunking system you have, ie: Motorola type I or II, EDACS standard, or SCAT, or EF Johnson. Each one of these uses a different type of tagging to program its frequencies. Some will allow you to just enter the AFS(agency frequency-subfrequency) It looks like this for example: 03-062 Either radioreference.com or your local radio shack should be able to help you in obtaining what you want.

Nov 02, 2009 | Uniden BC72XLT Handheld Scanner

1 Answer

Uniden bc147xlt frequency guides


Go to this site, it has frequencies for cities and counties around the US. This is a link directly for CA. Just click on your area.

http://www.radioreference.com/apps/db/?stid=6

Rollin CBs
Dean

Nov 26, 2008 | Uniden BC244CLT Base Scanner

1 Answer

I dont know how to progam it


Link: http://uniden.com/pdf/BC350Com.pdf

This link is the owners manual with step by step instructions.

Note: Pleas vote for me.

Jan 27, 2008 | Uniden BC350C Base Scanner

Not finding what you are looking for?
Uniden BC340CRS Base Scanner Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

211 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

509 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...