Question about Singer Quantum XL-1000 Computerized Sewing Machine

1 Answer

Singer Quantum XL-1000 - I removed the bobbin and bobbin case to remove some threads. Now I cannot get the bobbin case back in the proper position. How can I know that the bobbin case is in the proper position? Do you have a photo of the proper set up?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Expert
  • 2,973 Answers

I am attaching two photos, I cant say which one is worse, but may help. Both are of a Singer machine.
There is a lug on the casing that has to go into a slot made on the ring where it rotates. The bobbin does not matter as it has to rotate in any case but its casing stays stationer because of this lug.Singer Quantum XL-1000 - I - shiela65_0.jpgshiela65.jpg

Posted on Nov 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My singer quantum xl 1000 is stitching in one place


Remove plate over feed dog, femove bobbin and bobbin casing. My guess is that you have debris, lint or a piece of fabric stuck in the works

Dec 17, 2016 | Singer Quantum XL-1000 Computerized Sewing...

2 Answers

How do you get the auto threading and wind in place to work on Singer XL6000 sewing machine


There are several FB and Yahoo groups dedicated to the Quantum XL-1000, XL-5000 and XL-6000 who can help you. It may be that your problem with the autothreading is the autothreader is out of adjustment, but I'm at a loss as to the bobbin winder problem.

Jul 15, 2014 | Singer Quantum XL-6000 Computerized Sewing...

1 Answer

Singer quantum XL-150 how do i thread this machine?


All Singer models would have arrows/numbers to guide your top threading from the spool pin to top thread guide, for most machine start from your thread spool pin, to a thread guide follow arrow down then up into the take up lever and down to the needle thread guide then into the needle hole. Assuming you have wind and install the bobbin thread into the bobbin case, turn your hand wheel towards you makes the needle bar goes down,keep on turning till the needle bar is fully up again, pull the end of the top thread to pick out the bobbin/bottom thread. With your material/fabric under the presser feet, apply the presser feet lever down, you are ready to sew.

Dec 24, 2013 | Singer Quantum XL-1000 Computerized Sewing...

2 Answers

Singer quantum xl-600 bobbin case spinning


sounds to me like you need a professional cleaning and timing adjustment.

Jul 09, 2012 | Singer Quantum XL-6000 Computerized Sewing...

1 Answer

Need a bobbin case for singer quantum xl 1000 sewing machine


try these sites
sewingpartsonline.com
sew4less.com
singerpartsdirect.com

May 21, 2012 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

I just purchase a Singer 301 and cant get the bobbin case out


Raise the bed extension, revealing the bobbin area. Gently pull out on the bobbin case latch and it should pop right out in your hand. Congrats on your 301, they are wonderful machines!

Jun 08, 2009 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Singer 301A stitch jam


your machine threads from right to left. the needle flat spot faces left. big loopy things means that the upper part of the machine is not threaded properly. as far as the needle hitting the bobbin case, it sounds as if someone removed the hook (part that holds the case) and put it back on 180 degrees off.

Jun 01, 2009 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Won't stitch properly


it sounds like you might need a new bobbin case to me try that and see if the issues you are having stop hope this helps

Sep 20, 2008 | Singer Quantum XL-1000 Computerized Sewing...

1 Answer

Needle won't pick up bobbin thread


Is it possible the bobbin is in backwards? I have also found mine to be fussy with cheap bobbins.

Jan 20, 2008 | Singer Quantum XL-1000 Computerized Sewing...

Not finding what you are looking for?
Singer Quantum XL-1000 Computerized Sewing Machine Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Cindy Wells

Level 3 Expert

5160 Answers

mystery_soul

Level 2 Expert

48 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...