Question about Insignia NS-24 TV TV

1 Answer

Turn it on and there is no sound or picture. Any hope that it isn't dead?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Insignia Master
  • 11,800 Answers

It's defective, that's for sure. On the front of the tv there should be a small standby light - that light , when on, even if it's only blinking, signals that the power source of the tv operates at least at a basic level. If it's off completely that means that the power source is dead. Since power sources never die on their own it means that other components inside the tv have been damaged. This is an older tv, with a big tube - the only thing that would cause a complete failure is the high tension module. Fixing it will not be easy and will cost you around $200.
For the same money you can buy a brand new LCD tv of the same size so, even if the tv can be fixed, it's not worth it. The tv is dead, buy a new one.

Posted on Nov 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of the turn signal relay on a 1992 nissan sentra


This isn't the most detailed picture but it will give you a good idea as to its location. Hope this helps....

9_20_2012_9_44_55_am.jpg

Sep 19, 2012 | 1992 Nissan Sentra 4 Door

1 Answer

I have a Panasonic TV CT-34WX50 every time I change channels


it sounds that have problem in the chroma board ( video board ) a small board that hooked up in the neck of the picture tube. if the color is greenish the cause is dead in red video driver transistor or open resistance. hope this can help good luck.

Jul 26, 2012 | Panasonic CT-34WX50 34" TV

1 Answer

SOMETIMES THE PICTURE ISN'T ON THE SCREEN. I TURN IT TO ONE OF THE CAMERA MODES AND NO PICTURE COMES THROUGH ON THE SCREEN. THE ONLY PLACE IT DOES IS WHEN IT SET ON C.


Hi Linda: Sometimes?
If you can check menu settigns there, isnt the LCD screenviewer, then sound like a malfunctioning CCD (Charge Coupled Device) image sensor... in both cases (LCD or CCD) this isn't a job that you could solve yourself; this wrong include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card.

I suggest check this link for additional details in this previous solutions for an Defective CCD and next contact your Canon service.
I strongly suggest (taking into consideration the age of your camera) to evaluate the cost of repair versus the cost of a new camera with similar features, before making a final desicion.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 04, 2011 | Fuji FinePix A345 Digital Camera

1 Answer

My Magnavox TV give sound but no picture. When I turn it on the light in the bottom right hand screen goes green, then flashes to yellow and goes back to green. The screen does not change it is constantly...


You need to replace your backlight inverter.

Check that all voltages are coming from the power supply as they should. The power supply will be stamped with the correct amounts, and you just read with the multimeter to confirm.

After those check out ok, you will need to replace the inverter to "light" your screen again.


You can hear sound because the tv is ON, but the inverter isn't lighting the screen!


Hope this helps, please rate!

May 11, 2011 | Televison & Video

1 Answer

Tv would seem to lose connection ... the screen picture would go"in and out" and then dark, and then come back on. Now the TV won't "turn on" even though the power indicator light is on.


Now,tv turn on have flashes picture few sec.dies and stiill have sound?Yes,than 1 or 2 a long LCD inverter boards are dead. Those 1 or 2 long LCD inverter boards help the LCD screen to have a backlight to produced a picture.No picture or sound at all?The Tuner board is dead,that the board,where the incomming broscasting signal cable plug into it dead.Tries websites like Shopjimmy.com,Ebay.com to buy those 1 or 2 long refurbishes LCD inverter boards or the Tunner board for the replacement.

Sep 19, 2010 | Vizio L30WGU 30 in. HD-Ready LCD...

1 Answer

No picture but with sound


Ur LCD inverter board it dead,replaced it will get picture back.

Dec 14, 2009 | Samsung SPN4235 42 in. Plasma HDTV

1 Answer

Not power not picture or sound


If its Dead Dead ,that mean no power is getting past the fuse :> then it needs a fuse
.30 vs 300.00-400.00

Ok there is a way of telling if its posibley
just a fuse . First no blinking lights ,good
no clicking sound from the set when you
try to turn it on .good

now unplug the set for about 30min
the plug it back in slowley if you
see and or hear sparks coming from
the plug , this is normal but bad news
for it being just a fuse , if you dont
see or hear a spark its likley just a
5-8 amp fuse blew inside the set. :>

Hope this was helpful

Jul 02, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

TV no picture


sell it to me my screen cracked

Sep 04, 2008 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

Not finding what you are looking for?
Insignia NS-24 TV TV Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74496 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Cindy Wells

Level 3 Expert

5190 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...