Question about Home

Open Question

I have a error code on my hot tub. The model is DU-HPL100-DCAJ. The error code is FL. I can not find it anywhere. Can you help... CT

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Coastsider
  • 331 Answers

SOURCE: Jacuzzi hot tub model J-300 series with an FL-1

A flashing “FL1” display means the flow switch is
malfunctioning open, the filter cartridge is excessively
dirty or an “air lock” condition has occurred at the
circulation pump intake.

Posted on Apr 14, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hot tub pump noisy, heats to set temp, fl error code


This sounds like your motor is going out. When they get noisy and run really hot is when they go out

Rod
US Parts Center

Jan 08, 2013 | Qca Spas Jewel Series Topaz Plus Hot Tub

1 Answer

Hot tub reads 104 degrees but actaully only 102, has a balboa cat200 controller


SEE IF YOU CAN FIND A NEW THERMISTOR THERE NOT THAT MUCH MONEY AND A GRAVY FIX ! ALSO DEPENDING,YOU MIGHT BE ABLE TO CLIP OR ATTACH A HEAT SINK TO THE PROBES HOUSING THIS WILL HELP BLEED OFF SOME OF THE HEAT FOOLING THE THERMISTOR .. YOU MIGHT HAVE A FLOW PROBLEM ALSO MAKE SURE THE PUMPS IMPELLER IS FREE OF DEBRIS
JAY THE POOL PUMP MOTOR REPAIR GUY LONGWOOD FLORIDA 32750 FREE MOTOR AND CAPACITOR TESTING !

Sep 21, 2012 | Pool & Spa

1 Answer

What does the "FL" code


Fl stands for FLOW error code. This means that either the pump is not pushing enough water, or the pressure switch that senses water flow through the heater is not functioning. This are inexpensive and easy to fix yourself if it is just the pressure switch. Look on or near your heating element for a small disk switch with two wires coming out of it. Remove and replace this part.

Feb 15, 2011 | Qca Spas Dream Series Dream Master Hot Tub...

1 Answer

Error code FL and does not drain completly


most probably needs the water pump replaced.  not hard to do if you are a little handy..  there were a lot of problems with this machine regarding the water pumps.

Jul 22, 2010 | Kenmore Washing Machines

3 Answers

What does FL mean on my hot tub?? water doesnt circulate but is still sort of warm...


FL could be a code for low flow. If you have no circulation this sounds like it. If your pump runs and you have no flow you could have a problem with your pump. Or if you have the tub drained then it could be an air lock, if you open the drain valve till you get water out that should fix that. Also check to be sure the isolation valves are open under the spa. I hope this helps.

Feb 07, 2010 | Qca Spas Dream Series Dream Master Hot Tub...

1 Answer

2005 beachcomber is saying FL


Its an error code for insufficient flow. Try cleaning your filter(s) and turn off the breaker for 5 min. If that does not fix it, you may have a bad flow switch. Hope this helps.

Nov 11, 2009 | Qca Spas Dream Series Dream Master Hot Tub...

1 Answer

My maytag neptune mah550bww will not start up , gives a code FL


The FL error code means:
Flood Condition: FL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for FL to be displayed

With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.

Press STOP/CANCEL to clear the display.

This problem i see on these are the water pumps getting clogged with lint or other things, causing the pump not to pump all of the water out at times.


There is a backup valve or flap in the drain assembly that seems to sometimes cause problems with the FL error code. Remove this piece to see if it helps.



If this is a new installation - check that the hoses arent reversed (cold on hot and hot on cold). This will also cause the FL error.


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Jun 06, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

The Start Button on My Kenmore Elite Calypso won't engage


The FL error code means:
Flood Condition:
FL flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize that the trip was due to an overfill condition instead of a suds lack condition in order for FL to be displayed

With an overfill condition, the beeper repeats a warning every 10 seconds with no time-out. The pump is cycled in drain mode for 30 seconds on, 30 seconds off until the overfill switch resets or power is discontinued to the unit.

Press STOP/CANCEL to clear the display.

This problem I see on these are the water pumps getting clogged with lint or other things, causing the pump not to pump all of the water out at times.

There is a check "valve" in the drain assembly that seems to sometimes cause problems with the FL error code. You can remove this piece, and might avoid changing the pump.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Aug 27, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Home Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

Donni Steen

Level 3 Expert

659 Answers

Brad Brown

Level 3 Expert

16181 Answers

Tom Chichester

Level 3 Expert

36394 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...