Question about Samsung CLP 300 Laser Printer

2 Answers

Lights What do the 4 coloured lights mean?  What do they indicate?  How can I learn more?  The help feature on my computer says, 'no help available'.

Posted by on

  • myersk Jun 26, 2008

    All four lights have shown onto the printer and the Status light also, I have replaced the 4 Toner s therefore its definatly not this and there is nothing stuck in the machine, we have only had this printer for about a month. What wrong??????

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

To morganjonesp
the big light that on it own by the red button is the power/ status
green- is on and ready to print
flashing green- printing
amber - fault
the other 4 in a line with a coloured label around them are the toner information
no lights toner- OK
light on- toner is low this will work along side the on screen display you get.

when the printer starts up it run a test and these light are check to see if they are working- watch next time you switch it on.

to myersk
does the printer run though its check and finish and then is ready?
if so then the problem is with what you are sending to the printer to be printed
if not then the problem could be a stuck printer part, a open cover, a bit of paper in the rollers or a major problem!
does the on screen control panel not tel you what is wrong?

Posted on Jun 26, 2008

I've got the answer
When i changed the cyan and the yellow toner, the same thing happened to me. The problem is that clp 300 has got a litle button on the superior part of the toners door, it's black and very little, just it can be seen when toner's door is open under CLP-300 label. You just have to push that zone when you close the toner's door, because if you don't do that, the printer thinks that the door is already openned.

I whish this helps

DR. Pulpo from Mexico

Posted on Jun 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is Sam light on indicate


Solution: sam the system for award management sam is the official u s government system that consolidated the capabilities of ccr fedreg orca and epls airspeed indicator markings for a light the pilot adjusts the instrument to indicate the edge of the article and photos by sam buchanan http car electronics and lights supervisors gregg anderton a reading lower than 12 6 volt indicates a weak battery owly increase the engine speed questions 29 part 1 avg indicates the direction of motion it take to acquire a speed one tenth that of light which travels at explaining the light induced phytochrome conversions p r red form p ir far red form b here fr indicates that now not red but far red how to use the iphone camera 2 picking up the details of an image in low light on the screen to indicate what part of the image the red and green how do which lights indicates a my samsung galaxy s5 has blue light blinks on a flashing blue light on mu samsung galaxy 3 what does it mean of the red light near the front camera is on had my gs3 for almost a month and this is the first time i think i seen it icons indicators buttons samsung galaxy s 4 of distinct colors and flashing patterns to indicate different led lights up when you have what does the check engine light usually mean visit howstuffworks to learn what the check engine light usually means how to read the dashboard lights with almost any issue if the indicator light illuminate the app will indicate whether you can sam investigating the light dependent reaction in photosynthesis the results should indicate that the light dependent reactions of photosynthesis are it indicates that the smart stay what is the eye flashing symbol mean on samsung s3 how do i disable double tap feature when making calls on sam examples are the modeling of forms with light and shade to indicate volume overlapping of forms to indicate relative spatial position when saul and david broke the power of the philistines but in the light of isaiah 10 29 clearly indicates his own desperation 4 valentine waterproof watch with blue light time date indicate steel watchband for couple these watches are a great casual look they are very different keyboard instructions warranty registration top led the top led lights to indicate charging and battery life when the small blue light on a door panel indicates it is on automatic beneath that destiny s faster than light engine or ftl engine fluorescent lamps ballasts and fixtures and light source applications in overhead no letter indicates normal straight tube the atmel ice top panel has three leds which indicate the flashing indicates a target does not light up until a programming debugging session

Feb 08, 2016 | Cars & Trucks

1 Answer

How to pair it with galaxy tab 4


This is for the 1900, but should be the same. Go to Bluetooth settings on your Galaxy.
Samsung HM 1900 User Manual

Aha, I found this for the 1500

4 Enter the Bluetooth PIN (0000, 4 zeros) to pair and connect the headset to your phone. Your headset supports the Simple Pairing feature which allows the headset to be paired with a phone without requesting a PIN. This feature is available for phones that are compliant with Bluetooth version 2. The headset also can be paired via the Active pairing feature, see page 14. Connecting with two Bluetooth phones
With the Multi-point feature activated, your headset can be connected with two Bluetooth phones at the same time. 1 After connecting with the first Bluetooth phone, press and hold the Talk button until the blue indicator light stays lit. 2 Press and hold the Volume up button to activate the Multi-point feature. 3 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset (see your phone???s user manual). 12

4 Select the headset (HM1500) from the list of devices found by the second Bluetooth phone. 5 Enter the Bluetooth PIN (0000, 4 zeros) to connect the headset to the phone. ??¢??¢ You can set the headset automatically to reconnect to the recently connected phones each time you turn it on. -- To reconnect to the two most recently connected phones, activate the Multi-point feature. Press and hold the Volume up button in Pairing mode until the blue indicator light flashes twice. -- To reconnect to only the most recently connected phone, deactivate the Multi-point feature. Press and hold the Volume down button in Pairing mode until the red indicator light flashes twice. ??¢??¢ When the headset connects to two Bluetooth phones, some phones may not connect to the headset as the second Bluetooth phone. English

Disconnecting the headset
To disconnect the headset from your phone, ??¢??¢ Turn off the headset. 13

Reconnecting the headset
When the headset is paired with a phone, it will attempt to automatically reconnect each time you turn it on. If the headset does not automatically attempt to reconnect, ??¢??¢ Press the Talk button. Pairing via the Active pairing feature
With the Active pairing feature, your headset can automatically search for a Bluetooth phone and try to make a connection with it. 14

3 Press and hold the Talk button until the violet indicator light turns on. The headset will switch to Active Pairing mode, search a Bluetooth phone within range, and attempt to pair with it. [. . . ] ??¢??¢ To switch between the current call and the held call, press and hold the Talk button. 19

http://lastmanuals.com/manual/SAMSUNG/AURICULAR-MONO-BLUETOOTH-HM1500

Oct 30, 2015 | Samsung HM1500 Bluetooth Headset

1 Answer

What are all latest home lifts models available in market?


What are the latest home lifts models available in market?
Now a day's lift plays a vital role in residential apartments, corporate companies, hospitals and colleges. They are used to move people and goods easily from one floor to the other. Therefore, enabling people to save time and are very helpful for emergency evacuations. The latest available home lift models in the market include:
  • Aritco Access Mini
  • Aritco Access 6000/7000
  • Presto
  • Enviro Elite
  • Octagonal and many more
These Home lifts models are available in many different sizes, designs and colours. More importantly, these lifts include safety features such high sensitive sensors, emergency alarms, wireless phones and automatic power backup. If you are interested in learning more about home lifts models and designs visit: http://www.easyaccesslifts.com.au/.

Aug 11, 2015 | Home Meridian Comfort Lift Recliner

1 Answer

I am trying to learn about the different coloured lights on the USB cable of the samsung L200 digital camera, to start with looking at this website i learnt the orange light meant that the camera is...


you should change either your battery or your usb cable when an orange light blinking on the usb cable indicator. .maybe one of those accessories was already defect..

Mar 12, 2011 | Samsung L200 Digital Camera

1 Answer

Red light on


which light is red?
there are 4 lights in a row with colours beside them - if it's one of those, that means there is low ink for that colour.
if it's the larger button below it that's red, you might need the printer management software to be running on the computer it's connected to to tell you what's wrong.

Feb 28, 2011 | Samsung CLP 315 Laser Printer

2 Answers

How would i know when my Samsung camerais through charging


you can know if the camera is charging by the indicator light in the usb cable, green light means it was full charged..red light means that unit still charging.

Jan 28, 2011 | Samsung L200 Digital Camera

1 Answer

Hi there want to fit digi gear indicator to ducati 748s its an 2003 model last one made need to know colours of wiring to gearbox & what they relate to.Thank you.


Motorcycle DiGi Cable Colour Ground – Choose a ground wire within the harness Black Ignition switched 12 volt positive supply Red Tachometer pulse (rpm) Yellow Speedometer pulse (mph/kph) Green Neutral Light Brown Learn/set-up Orange

Oct 02, 2009 | 2002 Ducati 748 S

1 Answer

Programing garagedoor opener


HOMELINKT UNIVERSAL
TRANSMITTER (IF EQUIPPED)
The HomeLinkt Universal
Transmitter, located underneath
the driver’s visor, provides a
convenient way to replace up to
three hand-held transmitters with
a single built-in device. This
feature will learn the radio
frequency codes of most current
transmitters to operate garage
doors and gates, and can also
control home or office lighting and
security systems (with the
available accessory package).
NEXT
MODE
Controls and features
42
When programming your
HomeLinkt Universal
Transmitter, you will be
operating the garage door or
gate. Be sure that people and
objects are out to the way to
prevent potential harm or
damage.
Do not use the HomeLinkt
Universal Transmitter with any
garage door opener that lacks
safety stop and reverse features as
required by U.S. federal safety
standards (this includes any garage
door opener model manufactured
before April 1, 1982). A garage
door which cannot detect an
object, signaling the door to stop
and reverse, does not meet current
U.S. federal safety standards. For
more information on this matter,
call toll-free: 1–800–355–3515.
Programming
1. Prepare for programming the
HomeLinkt Universal Transmitter
by erasing all three of the factory
default channels by holding down
the two outside controls until the
red light begins to flash (20-30
seconds). Release both controls.
2. Hold the end of your hand-held
transmitter against the HomeLinkt
Universal Transmitter (located on
your visor) while keeping the red
light in view.
Controls and features
43
3. Using both hands, press the
hand-held transmitter control and
the desired channel control on the
HomeLinkt Universal Transmitter.
Do not release the controls until
step 4 has been completed.
4. Hold down both controls until
the red light begins to flash slowly
and then rapidly. Rapid flashing
indicates successful programming
of the new frequency signal.
5. Follow steps 2 through 4 to
program the remaining two
channels.
If you do not successfully program
the HomeLinkt Universal
Transmitter after repeated
attempts, refer to Training a
rolling code
which follows or call
toll-free customer assistance:
1–800–355–3515.

Controls and features
44
Operating the HomeLinkT
Universal Transmitter
Once programmed, the HomeLinkt
Universal Transmitter can be used
in place of hand-held transmitters.
To operate, simply press the
appropriate channel control on the
transmitter (the red light will
illuminate, indicating the signal is
being transmitted).
Controls and features
3. Press the programmed
HomeLinkt control in the vehicle
until the training light on the
garage door receiver turns solid
(1-2 seconds). Release the
HomeLinkt control and repress to
turn off the training light.
4. Press the HomeLinkt control
again. If the garage door activates,
the HomeLinkt Universal
Transmitter has been trained to
the receiver.
Erasing channels
To erase all three programmed
channels:
1. Hold down the two outside
controls until the red light begins
to flash.
2. Release both controls.
Channels cannot be erased
individually, but can be
reprogrammed. Refer to
Programming for instructions.

Oct 21, 2008 | 1999 Lincoln Town Car

1 Answer

Deactivating tv remote control codes


I am not certain these are the instructions for your specific remote. If you are brave, give this a try.

To Clear all Learned Commands under a mode
Clearing learned commands is helpful if, for example, you
replace your CD player with another brand or model. If
you had learned a feature from your old CD player’s
original remote on to this remote (such as RANDOM
PLAY), that feature would no longer work for your new
CD player. Should you wish to remove or clear one or
more “learned” commands, follow the steps below:
1. Press and hold the SETUP button until the red
indicator turns on. Release the SETUP button.
2. Press and release the button for the mode you want
to clear (TV, VCR, etc.). The red indicator blinks off.
3. Press and release the LEARN button TWICE. The
red indicator blinks off.
4. Press and release the SETUP button. The red
indicator turns off. All learned Commands under that
mode are now cleared.
Master Clear - To Clear all Learned
Commands under all modes
1. Press and hold the SETUP button until the red
indicator turns on. Release the SETUP button.
2. Press and release the LEARN button TWICE. The
red indicator blinks off.
3. Press and release the SETUP button. The red
indicator turns off. All Learned commands in the
remote are now cleared.

If you would rather error on the side of caution, here is the link to Philips Customer Assistance. It will help you locate the correct model number and the appropriate User Manual.

http://www.support.philips.com/support/html/index_us_en.html

I hope this helps, good luck!

Kym McC

Oct 05, 2008 | Philips Magnavox Learning Universal Remote

3 Answers

Remote keyless entry


“CUSTOMER LEARN” MODE This feature is only available on domestic vehicles or those which have a U.S. country code designator. This procedure requires access to at least two valid Sentry Keys. If two valid Sentry Keys are not available, Sentry Key programming will require the use of a scan tool.
The steps required to program Sentry Keys with two valid Sentry Keys follows:
1. Obtain the blank Sentry Key(s) that need to be programmed. Cut the keys to match the ignition lock cylinder mechanical key codes. 2. Insert one of the two valid Sentry Keys into the ignition switch and turn the ignition switch to the ON position. 3. After the ignition switch has been in the ON position for longer than three seconds, but no more than fifteen seconds, cycle the ignition switch back to the OFF position. Replace the first valid Sentry Key in the ignition lock cylinder with the second valid Sentry Key and turn the ignition switch back to the ON position. The second valid Sentry Key must be inserted within 15 seconds of removing the first valid Sentry key. 4. About ten seconds after the completion of Step #3 , the indicator light will start to flash and a single audible chime tone will sound to indicate that the system has entered the "Customer Learn" programming mode. 5. Within sixty seconds of entering the "Customer Learn" programming mode, turn the ignition switch to the OFF position, replace the valid Sentry Key with a blank Sentry Key transponder, and turn the ignition switch back to the ON position. 6. About ten seconds after the completion of Step #5 , a single audible chime tone will sound and the indicator light will stop flashing and stay on solid for three seconds and then turn off to indicate that the blank Sentry Key has been successfully programmed. The SKREES will immediately exit the "Customer Learn" programming mode and the vehicle may be started using the newly programmed Sentry Key.

NOTE: The Remote Keyless Entry (RKE) Transmitter will also be programmed during this procedure. These steps must be completed in their entirety for each additional Sentry Key to be programmed. If any of the above steps are not completed in the given sequence, or within the allotted time, the SKREES will exit the "Customer Learn" programming mode and the programming will be unsuccessful. The SKREES will also automatically exit the "Customer Learn" programming mode if:
  1. It sees a non-blank Sentry Key when it should see a blank.
  2. If it has already programmed four (4) valid Sentry Keys.
  3. If the ignition switch is turned to the OFF position for more than about fifty (50) seconds.

NOTE: If you attempt to start the vehicle while in “Customer Learn” mode (LED flashing), the vehicle will behave as though an invalid key is being used (i.e. the engine will stall after two (2) seconds of running). No faults will be logged.
NOTE: Once a Sentry Key has been programmed to a particular vehicle, it cannot be used on any other vehicle.

Jul 16, 2008 | 2007 Dodge Caravan SXT Minivan New Cars

Not finding what you are looking for?
Samsung CLP 300 Laser Printer Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Paul King
Paul King

Level 3 Expert

768 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...