Question about Sport & Outdoor - Others

Open Question

What is an E2 error on Healthrider soft stider pro treadmill model HRTL21470

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dj_relly999
  • 4070 Answers

SOURCE: healthrider treadmill modle #HTRL21470 serial

Hi and welcome to FixYa!
An E2 is definitely a system failure. As a first course of action I strongly suggest that you press the reset button on the frame near the power cord. This will reset the system and can get the treadmill back to it's normal operation.

If the problem still persist please unplug the unit from power source and switch the treadmill ON while unplugged to hard reset the system.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on Jan 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i download a manual for an image 10.4 treadmill? it displays an E2 or E4 error message. thanks.


Try Retrevo Manuals.com lots of manuals but you really have to search for them. Make sure you gave make, model number etc.

Dec 15, 2013 | Treadmill Doctor Image 10.4 Q Console...

1 Answer

Healthrider 500i. The screen lights up with no belt, fan, or key pad response. I manually started the belt then it wouldn't stop or change speed.


adjust the Reed Swith see the diagram:RESET, clean, and tight cable connector.

2) Run the software calibration for easy diagnostic, troubleshooting, and fix it.

God bless you
8_29_2012_5_42_03_pm.gif8_29_2012_5_42_33_pm.gif8_29_2012_5_43_13_pm.gif

Aug 28, 2012 | HEALTHRIDER Pro H500i Exercise Workout...

1 Answer

Soft strider by healthrider tread mill does not function and the error code PO comes up any suggestions?


1) Please exchange batterires for a new ones.
2) Tight the flexible cables from keypane vs display board.
3)Tight the connector from display board vs lower board(Main motor board)
4)Adjust the reed sensor switch by 1/8" or 3mmsSee the diagram attached.
5)Measure input voltage for 115 Vac to input of main motor board
6) Measure input for power supply for +5VDC to main motor board.
7)Measure output voltage for +5vdc to Display board.
8) Finally see the block diagram that I am attached that I did for people like you. For easy diagnostic and troubleshooting.
Sincerely. Merry Christmas.
Ernesto CuaddraManagua, Nicaragua.12_24_2011_4_58_14_pm.gif12_24_2011_4_58_29_pm.gif

Dec 23, 2011 | HEALTHRIDER R60 SoftStrider Treadmill

1 Answer

The belt has slowly moved all the way over to the right and is rubbing up against the right side. How do I adjust the belt back to the middle of the treadmill? It is a Health Rider XL Soft Strider.


There are two allen bolt adjustments on the bottom left of the treadmill as you are facing it to get on. o adjust the side-to-side position, turn one one way and the other the other way.

Oct 25, 2010 | HEALTHRIDER R60 SoftStrider Treadmill

1 Answer

My Healthrider 400se Treadmill slows down after 10seconds


Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge suppressor
(TVSS). The surge suppressor must have a
UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated
for 120 volts AC and 15 amps. There must be a
monitoring light on the surge suppressor to indicate
whether it is functioning properly. Failure to
use a properly functioning surge suppressor could
result in damage to the control system of the
treadmill. If the control system is damaged, the
walking belt may change speed or stop unexpectedly,
which may result in a fall and serious injury.

Jan 23, 2010 | HEALTHRIDER Pro H500i Exercise Workout...

1 Answer

E2 error codes shows on my Pro Form 730 si treadmill


Did you find a solution for this issue? I have a similar situation

Sep 28, 2009 | Exercise & Fitness

1 Answer

I have a Sears Pro Form 730si. The treadmill


I believe E4 on ths 730si means that the speed of the motor the sensor is detecting is greater than the set speed. E2 would be the opposite. I believe there is a way to calibrate the speed. Look at the smaller motor controller board.

Jul 14, 2009 | Exercise & Fitness

1 Answer

Error code E2


Hi most of the treadmill with e2 error code are related to the motor speed sensor so check the sensor

May 12, 2009 | Exercise & Fitness

Not finding what you are looking for?
Sport & Outdoor - Others Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...