Question about Sony KV-32V42 32" TV

1 Answer

NO PIX NO SOUND

Red power lite comes on. Standby/Timer red lite blinks continuously. Nothing else happens.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 105 Answers

I have searched high and low in all the documentation for your T.V., which is why it has been so many days since you posted your request for assisatnce.

Have you tried turning the TV on with both the remote and with the buttons on the TV? I'm betting you have, but I need to ask.

I would suggest that you unplug the TV for at least 24 hours to completely clear the memory of everything. This might reset the unit so that it begins working again.

However, my bet is that your power supply is dead so that it cannot power up the TV at all. Unless your TV is still under the warranty I think the only options you have are to either have the TV repaired by an authorized servcie technician or to buy a replacement TV.

Sorry I don't have better news to offer you.

Posted on Jun 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my sony kv-30hs420 tv wont turn on? When i try all that happens is the red light will keep blinking seven times!


My TV continues to blink on Standby with Red light ...

https://community.sony.com/t5/...blink...Red-light-flashing.../59141
Jan 12, 2013 - I need help with my Sony TV. The red flashing light keeps going on and off. ITs on standby. can someone guide me as to how to fix the problem. ... I have a Bravia KDL52W3000 with a 7" wide dead pix... Television - Picture & Sound ... What is the exact model number of the Sony TV? Check if the same issue ...

Nov 14, 2015 | Sony Standard (CRT) Televisions

1 Answer

Standby timer blinks times


There are particular blinks meaning on sony TV. I can give you the problem from your sony tv if you specify or count how times the LED flashed.

Jul 06, 2014 | Sony KV-27S42 27" TV

2 Answers

Sony Triniton TV KV 32FS120 will not turn on


In standby mode (red led on/after the led stops from blinking), press "Display", "5", Volume (-)", "Power on" on the remote control in sequence, self diagnostic screen will be display, let me know the what is on the screen to diagnose where the fault came from.

Nov 25, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

My Sony Trinitron TV 1999 (KV-32V42) made a strange popping sound and I lost both the sound & picture. When I turn it back on, the two red lights on the front of the TV(standby/Timer light & Stereo...


Hi,

The Standby/Power light of the TV blinks when there is any internal malfunction in the TV. The self-diagnostic function of the TV will cause the STANDBY light to blink or flash when the television detects an issue. The number of times the STANDBY light flashes corresponds to a specific issue.

Few examples are given below; some of the issues may be resolved without the need for service.
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.

If the television is plugged into a power strip or surge protector, remove it from the power strip or surge protector and plug it directly into the wall outlet. If the issue is resolved, the problem is with the power strip or surge protector and not the television.

If the issue continues to occur, service may be required.


Thanks for using Fixya.

Feb 04, 2011 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Sony Trinitron TV. No picture; red standby/timer light flashes.


My Sony trinitron has the stero lite on steady and standby lite flashes four times then pauses and repeats. Can you tell me the circuit/condition causing the set to not turn on.

Jul 15, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Tv wont turn


The blinking red light at the the front of the television is the "Diagnostic STANDBY/TIMER LED".
This little red light will blink 2, 4, or 5 times and then stay off for three-seconds. And blink again for 2, 4, or 5 times. This cycle repeats. The most common diagnostic code is the 4-blink code.

When the red LED blinks 4-times, it means one of two possible causes:
1) +13V is not supplied on the A-board. Or, 2) IC502 is faulty.

It is best to take this television set to a repair facility and ask that the +13V power supply be repaired.
The copper tracks and integrated circuit pads are very thin and delicate on the KV-24FV12 circuit board, and will easily lift off of the circuit board, if the incorrect desoldering tool is used. Unless one has a good quality PACE vacuum desoldering unit, one should not attempt to repair the television.

Aug 17, 2008 | Sony KV-24FV12 24" TV

4 Answers

SONY WEGA TRINTRON MODEL KV36FV15 RED LITE FLASHING


The model number is KV-36FV15 and blinking is constant no pause

Aug 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV

5 Answers

Sony Trinitron blank tv/no picture


When I turn on the TV I hear the click sound and the TV powers up. Immediatly the red (standby) light begins to flash 6 times on and off. this happenes only in the morning, but after 5:00PM when youturn on the TV as if nothing is wrong.

what is the problem?

Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV

3 Answers

Timer/Standby light blinks but no picture or sound when power button is pressed.


I'm having the same problem. My stand-by light blinks 3 times though. The tv clicks as if it is going to turn on, but it never does. Is there a simple solution to this problem?

Dec 22, 2007 | Sony FD Trinitron KD-34XBR960 34" TV

Not finding what you are looking for?
Sony KV-32V42 32" TV Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68202 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...