Question about Eiki LC-XB28 XGA LCD Projector Multimedia Projector
Broken pins/ wiring of the signal cable. Is there blue screen when
there is no input ? Try to change your signal cable.
Posted on Apr 17, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: won't power up
Hi, The owners manual says that if the red light is flashing, it is an indicator that it is ready to be turned on (use remote or onboard on button); flashing red & green - too high temperature inside, the unit is overheated. Check and clean the air filters; If the red light is steady, abnormal condition and you have to call for service. A copy of your manual is available at http://www.eiki.com/resources/resourcedownload.ashx?filename=/ownersmanuals/om_xb25_20_sb20.pdf Hope this be of some help. Pls post again how things turn up. good luck and kind regards.
Posted on Jul 31, 2007
SOURCE: Yellow middle, Blue Exterior
This is a Blue LCD Polarizer that will have to be replaced if the spot shows yellow.
You will find that this will only get worse as time goes by.
Posted on May 28, 2008
Check your filter and make sure the projector is well ventilated ( all vents free of objects), all electronics have to cool. Some lamps start flickering when their about to die.
Posted on Oct 27, 2009
Please check on of these solutions :
1:Remove the lamp from the projector. Ensure that it has no cracks, discoloration or "smoky" appearance.
2:Try removing and reseating the lamp, or to try another lamp.
3:Reset your lamp timer. Most projectors have no way of knowing if you physically have replaced your lamp. They rely on the user resetting the lamp timer
4:Pull the lamp back out of the unit, give is a brisk shake and reseat the lamp. Occasionally there is some buildup on the lamp contacts or filament during manufacturing.
5:Are the input and output vents blocked or obstructed in any way?
6:Are the filters dirty or clogged? Most manufacturers will recommend filter cleaning on a monthly basis depending on usage
7:Remove any extension cords, power strips and/or surge suppressors. Many current model projectors will not even try to ignite the lamp if they detect drops or fluctuation in voltage supplied to the unit. This is a safety feature to reduce stress on the lamp.
PLEASE DON'T FORGET TO RATE !
Posted on Apr 12, 2010
Tips for a great answer:
Jul 11, 2017 | Eiki Office Equipment & Supplies
Sep 11, 2013 | Eiki LC-XG210 Projector Multimedia...
Apr 07, 2011 | Eiki LC-XB28 XGA LCD Projector Multimedia...
Aug 15, 2010 | Eiki LC-XB28 XGA LCD Projector Multimedia...
Jul 11, 2010 | Eiki LC-XB28 XGA LCD Projector Multimedia...
Nov 02, 2017 | Eiki LC-SM4 Multimedia Projector
Mar 03, 2010 | Eiki LC-XB28 XGA LCD Projector Multimedia...
Nov 23, 2017 | The Office Equipment & Supplies
149 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: