Question about Consew 206RB

1 Answer

Hi, My Consew 206RB-5 is new. I was trying to wind a bobbin and the machine stopped suddenly. After looking at the parts list, Arm Shaft, Lower Shaft assembly, I could see that the notch on the Hook Assembly plate (4) is stopping the the Rotating hook (3) from moving. There is a groove in the Rotating hook where the notch is impacting it. How do I fix this?

Posted by on

  • zack86 Nov 15, 2010

    Here about the Consew 206RB-5 sewing machine you commented on yesterday. Obviously I already looked all through the manual. There is nothing there regarding getting this litttle tab away from the bobbin holder. And as for sending it back I bought it off the internet and I'm not about to send it back to California. These guys are clueless. Consew is no help and I can't find a dealer here in SW Virginia. The whole thing has been a nightmare from the beginning. They first gave me a tracking number for IL, after sending to the wrong state. Then I got it and the stand was used, the parts were in a paper bag and the motor didn't work. I finally figured out how to put it together without any instructions using pictures off the internet. An electrictian friend checked out the motor with his meter and found it was wired wrong. So at this point the last thing I'm concerned about is the warranty. I need to get it running and since I paid for Premium service I need someone who will help me and not give canned answers. The manual you asked me to go to is an UNSAFE site and Norton said stay away. If you give me a time, I'll pay to get on chat with you however I sat online over the weekend on chat for 45 minutes and nobody came on after I paid my $20.00. If you can't help me the please let me know and I'll find another so call expert. I'm not being a smart *** (well maybe a little) I'm just frustrated.

    Richard

  • zack86 Nov 15, 2010

    Hi, My Consew 206RB-5 is new. I was trying to wind a bobbin and the machine stopped suddenly. After looking at the parts list, Arm Shaft, Lower Shaft assembly, I could see that the notch on the Hook Assembly plate (4) is stopping the the Rotating hook (3) from moving. There is a groove in the Rotating hook where the notch is impacting it. How do I fix this

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

Hello Zack. If this machine is brand new, it is under warranty and you may want to return it for a free repair, rather than take it apart and risk causing a void in the warranty. That said, here is a copy of the owner manual http://www.devicemanuals.com/guide/Sewing%20Machine/Consew/Consew-206RB-5-Instruction-Manual-T0RNNE5UUT.html

IF you go to the troubleshooting guide you will see the proper alignment for these parts. Joe

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect knee lifter Consew 206 rb-5. Knee lifter got disconnected


Consew 206RB-5 knee lifter installation with measurements and pictures: http://indsew.com/tips_and_guides.asp - There is a picture of how to put it together and there is a blue print with measurements how to position it and install it.

May 11, 2014 | Consew 206RB

1 Answer

Needle hits bobbin case on consew 206rb


try these sites for video's & information
youtube
ehow
sewusa.com
fixsewingmachines.com

Apr 15, 2012 | Consew 206RB

2 Answers

Threading a consew RB-1 sewing machine


There are a few Consew models listed here http://www.sewusa.com/Sewing_Machine_Threading_Diagrams.htm maybe one will be similar enough to help you with the threading of your machine.

Apr 19, 2010 | Consew 206RB

4 Answers

I need a manual for a consew 206rb-1???? anyone


I have one and will copy it for you. Leave your phone number or give me your address.
Royce

Jan 22, 2010 | Consew 206RB

2 Answers

I need a downloadable Operating Manual for the Consew 206RB-5


I can not get the top thread to pick up the bobbin thread on a machine I have just bought .It was sewing fine and then the bobbin ran out. I have tried every which way but nothing works which way should the bobbin be winding

Apr 08, 2009 | Consew 206RB

1 Answer

Consew 206rb-1 thread was caught in the boobin area i removed


Had the same problen today, Remove your bobbin, the part where the bobbin is in should move a little, if it does not you have string you can not see behind that part. To get it out turn the machine backwards, it will really turn hard, but will turn, do this until you can see the thread come out or until the piece that holds the bobbin will move a little. good luck

Apr 06, 2009 | Consew 206RB

2 Answers

Bobbin Case will not snap into housing


Insert the bobbin case without a bobbin to see if it will go all the way into the locked position. If it does,the bobbin case and basket are okay.
Check inside the bobbin basket(where the bobbin goes) and see if there is thread or lint wrapped around the spindle the bobbin case sits on. If there is, remove it. If there isn't ,then the bobbin is probably sprung and needs to be replaced.
sewman7

Oct 14, 2008 | Consew 206RB

2 Answers

Consew 226 r sewing machine


do you have the user manual?

Sep 15, 2008 | Consew 206RB

2 Answers

Bobbin Threading


Divot on needle must be installed facing bobbin case.

Apr 24, 2017 | Consew 199R-2A Sewing Machine

2 Answers

Bobbin Threading


pree the foot pedal...

Feb 02, 2008 | Consew 206RB

Not finding what you are looking for?
Consew 206RB Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Consew Sewing Machines Experts

River bottom

Level 2 Expert

174 Answers

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Consew Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...