Question about Nikon COOLPIX S200 Digital Camera

2 Answers

Lens Error After powering on the camera you can hear the lens assembly cycling but then the display indicates a lens error.

Posted by on

  • 2 more comments 
  • Anonymous Jun 23, 2008

    Nikon S600 only had it for six weeks: it was in a felt pouch and dropped a few feet to wood floor. Lens error. Tried reseating lens, nothing worked. It is back at Nikon now, I will find out how much their poor design will cost me

  • Anonymous Jul 17, 2008

    Turn camera on, lens comes in and out making strange sound then says lens error. Camera never been dropped or damaged in any way. Had for 7 months but barely used!

  • koloheee Jul 31, 2008

    I used my camera...it was perfectly fine one moment. I turned it off. Then about 20 minutes later, turned it on and the lens kept tryoing to focus, making that sound and then on the screen flashed, "Lens Error"



    Ive tried turning it off and taking the battery out but nothing seems to work. Is anyone able to fix this problem?

  • Bala77 Sep 27, 2008

    I dropped my camera and when i try to on, it keep on focusing  and show "lens error". The roller can't even go in when i off the camera. It's Coolpix S200. Pls help

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I have the same problem and best buy sent it to the repair company and want to charge me 150 to repair it, they say i dropped it and broke the lens on the inside but i never dropped it. I am furious with nikon and so disappointed! i thought nikon was a good company and made good camera, but clearly the s200 had defects and then len broke way to easily! man this is total BULL!!!!

Posted on Jul 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I have the same problem with my nikon coolpix s200. After 2 months the lens of my camera won't go inside. On the lcd screen stood lens error. I went to a shop with this problem. He took the battery out of my camera and press the off and on button for a while. Then he put the battery back in the camera and press the on button. The lens of the camera was now going inside en outside and inside and outside with a strange noise. And also on the screen stood lens error. Okey, the lens is inside the camera. But how can I fix this camera? What is the problem? What have you done? Please let know..!!

Posted on Jul 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a canon Powershot A480. It keeps coming up with the faultLens Error Restart camera. How do I do this


Service & Support Issue: Camera displays "Lens error, restart camera" on the LCD monitor.
Solution: Possible solutions for a Lens Error message PowerShot A480.

The "E18" or "Lens" error message indicates an error that involves the lens unit or lens cover.
This error may appear where the lens is prevented from properly extending or retracting such as, for example, when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed if the lens unit/camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera. Solution
Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area:
  • Hold the camera so that your fingers do not touch the lens unit when you are shooting.
  • Make sure the camera is off before the camera is placed back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.
If you cannot clear the error code by turning the camera off and then on again, or if the error code is displayed frequently, a camera malfunction may have occurred. Please click here to set up service for your camera online.

Jul 25, 2010 | Canon PowerShot A480 Digital Camera

7 Answers

Canon sd850 is lenz cover partialy closed. Turn on says " lenz error. restart camera. Then shuts itself off.


u have see the user guide if its not help then reset your camera on the factory setting

thanx using fixya i hope it can help u

Sep 06, 2008 | Cameras

Tip

Sanyo digital camera showing lens error 1114 or 112


Hi.

If your Sanyo digital camera is not starting and you get lens error 112 or lens error 1114 prompted on display, that means that the lens is getting stuck, and cannot extend or retract fully. The controller board detects the error on startup, and shuts down after displaying the error message.
This errors usually happen because of dirt, or because the lens mechanis mis damaged in consequence of a shock.

If lens does not retract, try helping the lens back, without putting too much strenght, while you turn off the camera at he same time.
If the lens does not extend, try tapping softly the back of the camera to help lens out, while you turn off the camera at he same time.
If the camera had been exposed to sand or dust, try blowing canned air on the lens.

If this does not work, the lens assembly must be taken apart completely and re-assembed, and for that you need a camera repair shop.

Also call the number listed on the owners manual to get support from the manufacturer.

Check also the links below for more troubleshooting in case of lens error:

Lens not retracting on digital camera.

Lens Error.

on Apr 09, 2010 | Cameras

1 Answer

Camera will not switch on/off properly, and "E18" appears on the screen


Hi,


"E18"indicates an error that involves the lens unit or lens cover in your camera .This error appears where the lens is prevented from properly extending or retracting .The error may also be displayed if the lens camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera.Hold the camera so that your fingers do not touch the lens unit when you are shooting. Make sure the camera is off before the camera is placed back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.If you cannot clear the error code by turning the camera off and then on again, or if the error code is displayed frequently, a camera malfunction may have occurred and might require service from canon.Or else try pressing the power button on and held it down while extending the zoom lens. The lens will extend out and the camera will be freed from the error.

Thank you !!

Jul 06, 2010 | Canon PowerShot A95 Digital Camera

2 Answers

Hi i had an e18 error appear and the lens was stuck. the lens is now going in and out but the focus is compleatley shot every thing is blured any ideas?? thanks


Hi,

"E18" indicates an error that involves the lens unit or lens cover in your camera .This error appears where the lens is prevented from properly extending or retracting .The error may also be displayed if the lens camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera.Hold the camera so that your fingers do not touch the lens unit when you are shooting. Make sure the camera is off before the camera is placed back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.If you cannot clear the error code by turning the camera off and then on again, or if the error code is displayed frequently, a camera malfunction may have occurred and might require service from canon. Or else try pressing the power button on and held it down while extending the zoom lens. The lens will extend out and the camera will be freed from the error.

Thank you !!

Jun 22, 2010 | Canon PowerShot SD550 / IXUS 750 Digital...

1 Answer

Nikon coolpix camera dropped. displays 'lens error' on screen


Not good news. The message indicates that the lens housing has been dented or otherwise damaged, preventing the camera from functioning. Your camera will require professional repair.

Sep 10, 2009 | Nikon Coolpix 4600 Digital Camera

1 Answer

Lens error, restart camera


Lens error is usually caused by mechanical faults concerning lens assembly. The lens cannot extend or retract fully, the error is detected and lens error is returned.
Sometimes this can be fixed playing with the lens during extraction or retraction to help the lens asset getting back to normal.
More often the camera lens must be disassembled and re-assembled by a technician to fix the problem.

Apr 28, 2009 | Canon PowerShot SD850 IS Digital Camera

1 Answer

Lens Error


Check the contacts in the battery case. You can stretch/bend the contacts further out and the problem seems to go away for a while.

Jul 08, 2008 | Nikon Coolpix L11 Digital Camera

2 Answers

Error 18


The "E18" error code indicates an error that involves the lens unit or lens cover. This error may appear where the lens is prevented from properly extending or retracting such as, for example, when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed if the lens unit/camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera. Solution Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area: - Hold the camera so that your fingers do not touch the lens unit when you are shooting. - Make sure the camera is off before you put it back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.

Aug 31, 2005 | Canon PowerShot SD500 / IXUS 700 Digital...

1 Answer

Error 18


The "E18" error code indicates an error that involves the lens unit or lens cover. This error may appear where the lens is prevented from properly extending or retracting such as, for example, when pressure is applied to the lens or the area surrounding the lens while handling the camera. The error may also be displayed if the lens unit/camera has been subjected to an external shock, or if a foreign substance (i.e. liquid, sand, dirt) enters the camera. Solution Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area: - Hold the camera so that your fingers do not touch the lens unit when you are shooting. - Make sure the camera is off before you put it back in the case. Exercise caution to ensure that the camera does not accidentally power on while the camera is stored inside the case.

Aug 31, 2005 | Canon PowerShot SD110 / IXUS IIs Digital...

Not finding what you are looking for?
Nikon COOLPIX S200 Digital Camera Logo

Related Topics:

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...