Question about Trust Webcam Live WB-6250X

1 Answer

I cant get any sound from my end on skype. Vision is ok. Skype works perfectly well with my Trust webcam I can see the other person, they can see me, I can hear them but they cant hear me

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My chrystaleye webcam wont work with skype


SKYPE VIDEO PROBLEM
To test if the Logitech QuickCam is functioning, check the USB cable; make sure it is connected properly. Then click on Start - All Program - Logitech - Logitech QuickCam and see if you can get the camera to capture your image/video. If this works then the fault is with the Skype configuration. Sometimes the WEBcam settings drop off and the WEBcam need to be selected again. Open Skype - Tools - Options - Video Settings and select the Logitech QuickCam Also check the Audio Settings for the Microphone THEN click on Save. Avoid connecting the WEBcam to an USB hub. SKYPE MICROPHONE PROBLEM
If the person cannot hear you then, either your microphone driver not installed or not working OR the microphone is not configured in Skype.
To test your microphone then click on Start - All Programs - Accessories - Entertainment - Sound recorder. Then record your voice and then play it back. If this is OK then the microphone need to be configured in Skype.
To configure the microphone - Open Skype - Tools - Options - Audio Settings for the Microphone THEN click on Save.

Sep 03, 2012 | Acer Aspire 5500 5570-2609 Laptop

1 Answer

Installing a lifecam nx 3000. get no sound from


TEST SPEAKERS
Right click on speaker icon in System Tray
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click OK
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO SKYPE

Connect webcam
Its good practice to disconnect and re-connect your webcam before you start (To reboot the webcam software) - if you have been using it elsewhere the SKYPE software may have difficulty in locating it, even if you exited the previous program correctly.
The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted.
Mine, I just unplug it from the USB and plug it back in to reboot the software.
If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.

Start Skype.
On the 'Tools' menu, click 'Options'.
In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
Run down the list setting your defaults
Select your webcam as the default microphone.
Make a free test call
Click 'Save'
In the navigation pane of the Skype Options window, click Video Settings.
This will launch your webcam
Adjust quality of picture in 'Settings'
Check the correct webcam is shown as default
Click Save
Test your webcam by making a Skype test call.
For more information about how to configure Skype Messenger, please visit the following Skype Web site:
http://support.skype.com (http://support.skype.com)

Mar 18, 2010 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

Can't get video to show up on Skype


OK try to download latest version of skype:
available at : http://www.skype.com/intl/en/download/skype/windows/?c=101

After the download you can configure like this:

1.Start Skype.
2.On the 'Tools' menu, click 'Options'.
3.In the navigation pane of the Skype 'Options' window, click 'Audio Settings'
4.Run down the list setting your defaults
5.Select your webcam as the default microphone.
6.Make a free test call
7.Click 'Save'
8.In the navigation pane of the Skype Options window, click Video Settings.
9.This will launch your webcam
10.Adjust quality of picture in 'Settings'
11.Check the correct webcam is shown as default
12.Click Save
13.Test your webcam by making a Skype test call.

If you need more information about how to configure Skype please visit the following Skype Web site:
(http://support.skype.com)
ok
Regards
Uttam

Jan 12, 2010 | Macally IceCam Personal Web Camera

1 Answer

Webcam will not work via icon. will not work on skype. has sound OK and vision OK but not together. comes up with error mssg when icon clicked. fed up with it !!!!


Hi,

Please uninstall and reinstall your webcam drivers/software from the disc provided and also the skype software.

This should fix the issue.

Let me know the result.

Thank you for using fixya.

Dec 12, 2009 | Logitech QuickCam Communicate STX Personal...

2 Answers

Hello,Skype Webcam unknown Error


i have a same problem. my cam work well but in skype call it dose not work! in video configuration i see the cam but in video call write uknown error what can i do?

Nov 01, 2009 | Microsoft LifeCam NX-3000 Personal Web...

1 Answer

The other person cant see me on skype - pink screen


Test your webcam here - click allow in top window
http://www.testmycam.com/

All OK - Configure to Skype
Open Skype > Options > Audio Settings - set your equipment defaults > Save > Make a test call.
Navigate to Video settings ( Options > video settings ) set your preferences and trim picture quality using settings > Save
Make a test call

Oct 06, 2009 | Logitech Quickcam Chat Webcam

1 Answer

The person i am calling on skype cant see or hear me


You can only use the webcam with one device at a time? If you are sure the webcam is working properly shut down the software specifically for your webcam.

Log into Skype as normal.

Do you see the video call options in Skype?
In Skype you can check what you see in the following path?
Tools/ Options/ Video Settings/ Camera
Is you webcam listed if not link it using the option here.

May 11, 2009 | Logitech Webcam

2 Answers

Problems with Skype and Logitech QuickCam Pro9000, when trying videochatting. I can see and hear the person I talk to, but can´t get my webbcam to connect with Skype. In the small window, where I should...


if you have the correct driver ...and it works on other instant massaging programs..like yahoo messenger or so...it means that the problem is from settings and so ...and its nothing wrong with th ecamera ...so ..try to reinstall skype ...

Apr 08, 2009 | Logitech Quickcam Chat Webcam

1 Answer

What can I do to make my Logitech E3500 webcam work with skype


Somewhere in skype there are settings to choose your mic and speakers i'm just not sure exactly where probably under something like options

Jan 17, 2009 | Logitech Quickcam IM 961361-0403 Webcam

Not finding what you are looking for?
Trust Webcam Live WB-6250X Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trust Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Computer Links

Level 3 Expert

2385 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1148 Answers

Are you a Trust Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...