Question about Samsung HT-Z310T Theater System

1 Answer

Samsung HT-Z310 Theater System. The system was automatically turning off. Now the unit will not turn on. Have tried the reset (stop button) per the manual. Not working. Have unplug and repluged. Not working.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Try unplugging the unit for 60 minutes, then plug back in and try it again. This will reset the processor and hopefully the unit will operate normally. Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed. If all looks well, try disconnecting all the speakers and cycle the power off, then on again.
If it power up, try connecting the speakers one at a time until one of them shuts the receiver down. Check this speaker with a multi-meter and make sure it is reading between 4-8 ohms.

If not, the speaker may be blown and is causing the receiver to see a short and therefore power down. The "Protection" will stay lit because of a short inside the unit, and is protecting the rest of the components for further damage. It will automatically disappear once the condition is fixed.

Honestly though, if this is happening already, I would exchange the system as soon as possible or if you have an upgrade option, see if you can get a Philips, or Samsung system as they have better reliability in general based on what I've seen and read.


Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Nov 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung HT-Z310 will not power on after power outage and unplugging and holding the stop button for more than 5 seconds does not resolve the issue, any suggestions?


Open the system and replace the brown fuse with the number 382 on it. It's right where the cable plugs into the power board.

Sep 09, 2010 | Samsung HT-Z310T Theater System

1 Answer

My HT-Z310 surround sound says protect


The amplifier has a bad channel, the power supply is bad, or the amplifier is drawing too much power.The speakers could also be wrong, if they are not the speakers that came ith th unit, they will need to be replaced. (Any speakers within the specs of the amplifier will work, so to that end the system is customizable. You can go to Samsung.com to find the amplifier's wattage per channel, but the speakers you get MUST be 3 ohms impedance.) I have an article/tip/how-to as to wiring multiple speakers to one channel.

Jun 17, 2010 | Samsung HT-Z310T Theater System

1 Answer

Digital In on Samsung HT-Z310 no sound


Optical into your XBOX 360? If there is a connector that you are using to convert it, I was start by replacing that.

Jun 04, 2010 | Samsung HT-Z310T Theater System

1 Answer

Ht-z310 states protect. Tried to reset the machine but it didnt work? Samsung said it could be overheated however, the device hasnt been on in months.


The channel that has a dc voltage above .2 volts is bad. Measure from each terminal to the chassi . These unit are board replaceable. Replace the amp board.

Jan 01, 2010 | Samsung HT-Z310T Theater System

1 Answer

Samsung z310


You have to press the AUX button and set the HTS unit to D. IN (DIGITAL IN)
AUX 2 only works for the regular red & white audio cables.


Hope this helps!

Jun 27, 2009 | Samsung HT-Z310T Theater System

1 Answer

HOW DO YOU RESET A SAMSUNG HT-WX70 HOME THEATRE SYSTEM?


According to the instruction manual you turn off the unit and press the Stop button on main unit for at least 5 seconds. Didn't help me with my problem (shutting down for no apparent reason) maybe it will help you with your problem.

May 06, 2009 | Samsung HT-WX70 Theater System

2 Answers

Samsung HT-Z310 "Disc Error" Message....won't recognize disc


Turn off the power and hold the STOP ( ) button on the remote control for longer than 5 seconds (reset function). It fixed my Samsung Home Theature. Samsung has online chat to help too!!!

Oct 06, 2008 | Samsung HT-Z310T Theater System

Not finding what you are looking for?
Samsung HT-Z310T Theater System Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electric Dime
Electric Dime

Level 3 Expert

434 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Are you a Samsung Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...